Post Buy Requirement
Hitesh Steel
Mumbai, Maharashtra, India
gstGST : 27AAAFH2166A1ZY Verified Add Review

Our Products

  1. Pipe Tees 17 Products / Services available
  2. Steel & Steel Products 13 Products / Services available
  3. Tube Fittings 3 Products / Services available
  4. PVC, PP & Plastic Products 3 Products / Services available
  5. Fasteners 5 Products / Services available
  6. Bolts 9 Products / Services available
  7. Pipe Unions 3 Products / Services available
  8. Stainless Steel Pipes 9 Products / Services available
  9. Pipe Reducer 6 Products / Services available
  10. Erw Pipe 3 Products / Services available
  11. Other Products 75 Products available

Iron & Metal Alloys

Monel Plates

We are engaged in providing monel plates & sheets that is acknowledged for tight tolerance, smooth surface and uniform mechanical properties. Our range is procured from renowned manufacturers who have vast experience in the fabricating monel plates & sheets. These are available in different specifications to suit the requirement of different industry applications.

monel 400 is a nickel-copper alloy (about 67% ni 23% cu) that is resistant to sea water and steam at high temperatures as well as to salt and caustic solutions. Alloy 400 is a solid solution alloy that can only be hardened by cold working. This nickel alloy exhibits characteristics like good corrosion resistance, good weldability and high strength. A low corrosion rate in rapidly flowing brackish or seawater combined with excellent resistance to stress-corrosion cracking in most freshwaters, and its resistance to a variety of corrosive conditions led to its wide use in marine applications and other non-oxidizing chloride solutions.

type : sheet, plates, flat, strips, profile, blank , circle, ring etc.

grades: monel 400 (uns no. N04400), monel 500 (uns no. N05500)

applications
marine engineering
chemical and hydrocarbon processing equipment
gasoline and freshwater tanks
crude petroleum stills
de-aerating heaters
boiler feed water heaters and other heat exchangers
valves, pumps, shafts, fittings, and fasteners
View Complete Details

Beryllium Copper Alloy

Hitesh steel offer our clients a wide spectrum of beryllium copper alloy which is mainly demanded in varied industries for its different applications. These products are procured from most trustworthy vendors of the market. They ensure that these products are manufactured using high grade raw material and advanced technology. Our products are available in varied specifications as per the details given by our clients. Features:
* longer service life
* precision engineering
* resistant to corrosion.
Products: ss buttweld fittings
View Complete Details

Bronze Plates

Our firm is engaged in manufacturing and supplying a qualitative range of bronze plate. Customers can avail these products at an affordable price from our organization. Highly appreciated for their high tensile strength, resistant to wear & tear and durability, our products are highly demanded in the market for automotive applications.

hitesh steel maintains an extensive inventory of bronze plate and sheet. Our inventory consists of c61400, c63000, and c65500. Bronze is notoriously known for its great strength and resilience, making it a common alloy used throughout heavy industries such as marine and aviation.

type : sheet, plates, flat, strips, profile, blank , circle, ring etc.

grades: c61300, c61400, c63000, c65500, c93200 & c95400.

applications
marine engineering
chemical and hydrocarbon processing equipment
gasoline and freshwater tanks
crude petroleum stills
de-aerating heaters
boiler feed water heaters and other heat exchangers
valves, pumps, shafts, fittings, and fasteners
industrial heat exchangers
chlorinated solvents
crude oil distillation towers.
View Complete Details

Inconel Pipe

We are Iso-9001-2008 Certified Company Importers, Stockist And Suppliers Of Incoly, Inconel, As Per 600, 625, 800, 825, 718 Etc In Form Of Shim, Foil, Wire, Strips, Sheet, Plates, Flats, Wire, Round, Tubes, Pipes, Fittings, Flanges, Forging, Hardware, Nut, Bolt, Wacher, etc.
View Complete Details

Inconel 600

We are offering inconel 600:


international specifications bs 3072-3076 (na14)
din 17742, din 17750, din 17754
werkstoff nr 2.4816
tv 305
afnor-nc 15 fe
sheetplate astm b168, ams 5540
round barwire astm b166, ams 5665
pipe & tube astm b167, astm b829, astm b517, astm b775, astm b163, astm b516, astm b751, ams 5580
fittings astm b366
forgings astm b564, ams 5665
weld wire aws a5.14 ernicr-3, aws a5.11 enicrfe-3

c .15 max
mn 1.0 max
p
s .015 max
si .5 max
cr 14.0 -17.0
ni 72.0 min
mo
cu .5 max
co
cb+ta
ti
al
fe 6.0 - 10.0.
View Complete Details

Inconel 825

We offer inconel 825
chemical composition( %)
ni 38.0-46.0
fe 22.0 min
cr 19.5-23.5
mb 2.5-3.5
cu 1.5-3.0
ti .6-1.2
c 0.05 max
mn 1.0 max
s 0.03 max
si 0.5 max
al 0.2 max


inconel 825 rod
inconel 825 plate
inconel 825 sheet
inconel 825 pipe
inconel 825 tube
inconel 825 fitting
inconel 825 wire
inconel 825 bolt
inconel 825.
View Complete Details

Nickel Alloys

We are iso 9001-2008 certifed company import, stockists and suppliers of high purity nickel alloys, ferro-nickel, soft-alloys, in form of shim, foil, sheet, strips, plates, wire, round, hax, tube, pipes, fitting, flanges, forgings, etc.
View Complete Details

Inconel Alloys

We are offering incoloy alloys.
Incoloy alloys the nickel alloys and cobalt alloys are highly engineered to offer a superior combination of heat resistance, high temperature corrosion resistance, toughness and strength for the most demanding applications. Following are the specification in which materials can be supplied against your requirement.
Incoloy alloy 800
incoloy alloy 800h800ht
incoloy alloy 803
incoloy alloy 825
incoloy alloy 832
incoloy alloy 864
incoloy alloy 890
incoloy alloy 903
incoloy alloy 907
incoloy alloy 908
incoloy alloy 909
incoloy alloy 925
incoloy alloy 945
incoloy alloyma956
incoloy alloy ds
incoloy alloy 020
incoloy alloy 028
incoloy alloy 330
incoloy alloy 25-6hn
incoloy alloy 25-6mo
incoloy alloy 27-7mo
incoloy alloy a-286
in form of , foil, sheet, sheet, plates, flats, strips, wire, round, tube, pipe, fitting, flanges, forgings, etc
View Complete Details

Phosphor Bronze

We are offering phosphor bronze, more accurately described as tin bronzes, are alloys of copper where tin is the main alloying element with phosphorus added primarily as a deoxidant. Alloys containing up to about 9% tin are wrought. Alloys containing from about 10-12% tin are used as-cast. They are strong, corrosion resistant alloys with many traditional uses in marine environments and in electrical and electronic engineering where their especially at the higher cast level, imparts good wear resistance for traditional use in bearing components.

Different types:

bs 2870 bs 2875
pb 103 - bs 2874
pb 102 - nes 838 bs 2874
pb 104 bs b 24 (dtd 265 a*) (colbronze) - bs 1400
pb 1 astm b 139 : c 54400 (colphos 90)
View Complete Details

Nimonic 75

We are offering nimonic 75, wire, strips, round, profile, fasteners.
Nimonic 75* specification
*trade name of special metals group of companies
w.nr 2.4951
w.nr 2.4630
uns n06075
aws 032
applicable standards:
bs hr 5
bs hr 504

contact us.product range
nimonic 75 is a nickel-chromium alloy with good corrosion and heat resistance.
Good mechanical properties at elevated temperatures yes
corrosion resistant at ambient temperatures no
corrosion resistant & good mechanical properties at elevated temperatures no
oxidation resistant yes
precipitation hardenable no
applications include:
aerospace fasten
View Complete Details

Hastelloy Round Bars

We offer a comprehensive range of hastelloy round bars, in grades hastelloy c22. Known for resistant to general corrosion, crevice corrosion, intergranular attack, pitting and stress corrosion cracking, our range of haselloy round bars are widely used by our clients spread across the globe.


standard astm asme sb 574

grades uns 10276 ( hastelloy c 276 )
View Complete Details

Inconel 625

We are offering alloy 625
chemical composition %
c cr fe ni al ti co ta
max max min max max
0.10 20.0-23.0 5.0 58.0 0.40 0.40 3.15-4.15

availability:

welded pipe 12" - 8"
butt weld fittings 12" - 8"
flanges 12" - 8"
bar 1" - 4-12"

specification:

astm 8443, 8705, b366, b446, b564
asme sb443, sb705, sb366, sb446, sb564

inconel 625 rod
inconel 625 plate
inconel 625 sheet
inconel 625 tube
inconel 625 pipe
inconel 625 fitting
inconel 625 wire
inconel 625.
View Complete Details

Monel Metals

We are involved in offering a wide range of monel metals to our most valued clients. Our range of monel metals is widely appreciated by our clients which are situated all round the nation. We offer our range of monel metals at most affordable prices.
View Complete Details

Hastelloy Sheet And Plates

We offer wide range of hastelloy sheet, plates and coils as per the following specifications:-

grades:- hastelloy c-4 (uns no. N06455), c-276 (uns no. N10276), hastelloy c 22 (uns no. N06022), hastelloy c 2000 astm : b575

range :
0.5 mm to 200 mm thick in 1000 mm to 2500 mm width & 2500 mm to 12500 mm length available with nace mr 01-75.

types :
sheet, plates, coils, flat, strips, profile, blank , circle, ring etc.

form :
foils, shim sheet, rolls, perforated sheet, chequered plate.

finish :
2b, 2d, hr, cr, ba no(8), satin (met with plastic coated)
hot rolled plate (hr) cold rolled sheet (cr)

value added services :
cutting
bending
forging
rolling
heat treatment
minor fabrication
test certificate :
mill test certificate as per en 10204 3.1b
View Complete Details

Inconel Alloy 617

We are offering inconel alloy 617.
Alloy 617 _ uns n06617common trade names :inconel 617, nicrofer 5520
inconel 617 consists of nickel-chromium-cobalt and molybdenum. These elements make inconel 617 highly resistant to oxidation and carburization. Inconel 617 can be easily fabricated; it can be hot formed up to 2200 f, and cold formed at 1900 f. Inconel 617 has excellent weld ability. Inconel 617 is used for ducting, transition liners in both aircraft and land based gas turbines, and combustion cans.available forms are seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Sheetplate : asme sb-168, ams 5888, ams 5889
round bar : asme sb-166, ams 5887
forgings : asme sb-564, ams 5887
chemical analysis

c .05 -.15
mn 1.0 max
s .015 max
si 1.0 max
cr 20.0 -24.0
ni 44.5 min
mo 8.0 - 10.0
cu 5 max
co 10.0 15.0
ti 0.6 max
al 8 -1.5
fe 3.0 max
b .006 max
View Complete Details

Hastelloy Plates

Hastelloy is a high-strength, nickel based, corrosion resistant alloys perfectly suited for chemical applications. We specialize in manufacturing a comprehensive products from hastelloy, which includes pipes, tubes, sheet, plates, rods, etc. Our range of hastelloy products can be customized as per the industry specific requirements of the client.

hastelloy sheets and plates exhibit high temperature strength and oxidation resistance. They provide a significant advantage of easy welding and forming. Our range of hastelloy sheets and plates are widely used in diverse industries for application in pressure vessels, nuclear reactors, heat exchangers, chemical reactors, etc.

type : sheet, plates, flat, strips, profile, blank , circle, ring etc.

grades: hastelloy c-4 (uns no. N06455), c-276 (uns no. N10276), hastelloy c 22 (uns no. N06022),
hastelloy c 2000

hastelloy c-276 typically finds application in:
pollution control,
chemical processing,
waste treatment,
marine engineering,
pulp and paper production.
View Complete Details

Inconel 718

We offer wide range of inconel 718 product

inconel 718 rod
inconel 718 plate
inconel 718 sheet
inconel 718 tube
inconel 718 pipe
inconel 718 wire
inconel 718 fitting
inconel 718 bolt
inconel 718.
View Complete Details

Monel Sheets

We are offering monel sheets.
Our gamut of monel sheet , plates and coils is available in different sizes with thickness varying from 0. 1 mm to 150 mm.

range: 0. 5 mm to 200 mm thick in 1000 mm to 2500 mm width & 2500 mm to 12500 mm length available with nace mr 01-75
grades as under:- monel 400 (uns no. N04400), monel 500 (uns no. N05500)
View Complete Details

Inconel Plates & Sheets

We offer inconel plates & sheets.
Our sheets, plates and coils are made of nickel alloy plates & sheets, stainless steel & duplex steel plates, carbon steel & alloy steel plates and sheets. They are used in a range of applications like structural and mechanical & general engineering purposes. They are designed to withstand tremendous amount of weights and pressure.

our plates, sheets and coils are testimonials of our quality standards. Our range consists of sheets, plates & coils chequered plates, steel chequered plates and more.

range: 0.5 mm to 200 mm thick in 1000 mm to 2500 mm width & 2500 mm to 12500 mm length available with nace mr 01-75.

grades:-
uns 8800 (inconel 800)
uns 8825 (inconel 825)
uns 6600 (inconel 600)
uns 6601 (inconel 601)
uns 6625 (inconel 625)
View Complete Details

Monel Sheets

We are offering monel sheets & plates.

our range is widely acknowledged by the clients for various features such as durability, high strength, resistance to corrosion and chemicals. Monel sheets & platesfinds application in mail chutes, elevator fittings, ductwork, downspouts, laundry chutes, lighting fixtures and may more. We offer the range at reasonable prices.

features:

quality bound
effective
rust proof
View Complete Details

Monel K 500 Nickel Copper Alloy

Monel k-500 is a nickel-copper alloy with the same corrosion resistance and characteristics as the monel 400. The monel k-500 has a greater strength and hardness then the 400, as a result of added aluminum and titanium. In age-hardened condition, it has greater tendency toward stress- corrosion cracking in some environments. Available forms are
seamless pipe, welded pipe, seamless tube, welded tube, bar, wire, sheet, plate, forgings, pipe fittings and flanges.

Specificationssheetplate : qq n 286
round bar : asme sb-865, ams 4676, qq n 286
forgings : qq n 286, ams 4676

chemical analysis
c .25 max
mn 1.5 max
s .01 max
si .5 max
ni 63.0 min
cu 27 - 33
ti .35 -.85
al 2.30 - 3.15
fe 2.0 max
View Complete Details

Copper-Nickel Alloys

We are offering copper-nickel alloys (often referred to as cupro-nickels) offer moderate to high strength and excellent resistance to various waters, including seawater and form a protective surface film in such conditions. In addition they provide good anti-fouling properties and weldability.

the precipitation hardenable copper nickels (def stan 02-835 and ultibron-nb) possess high strength and are used as an alternative to the 9010 and 7030 alloys and other copper alloys such as nickel aluminium bronze in marine applications. Other useful attributes include low magnetic permeability, impervious to hydrogen embrittlement, no loss of impact strength down to minus 196c and good jet impingement resistance.

applications for 9010 and 7030 alloys mainly involve tubes and tube plates in heat exchangers, including desalination and seawater piping systems. 7030 alloy is also used for hose couplings, mechanical seals and pump shafts. Applications for the high strength cupro-nickels are varied and cover subsea bolting in oil & gas to hydraulic connectors and valve stems.

usage in naval vessels is widespread, for example, for bolting, propeller shafts, sonar components and weapons handling equipment. Copper-nickel alloys are also finding new applications replacing beryllium-copper alloys due to environmental difficulties in their manufacture.
View Complete Details

Nimonic Alloys

Offering nimonic alloys
the time-tested nickel alloys and cobalt alloys are highly engineered to offer a superior combination of heat resistance, high temperature corrosion resistance, toughness and strength for the most demanding applications. Following are the specification in which materials can be supplied against your requirement.
Nimonic alloy 75
nimonic alloy 80a
nimonic alloy 81
nimonic alloy 86
nimonic alloy 90
nimonic alloy 91
nimonic alloy 105
nimonic alloy 115
nimonic alloy 263
nimonic alloy 901
nimonic alloy pe11
nimonic alloy pe16
nimonic alloy pk33
View Complete Details

Incoloy Alloy

We are offering incoloy alloy 27-7mo.
Incoloy alloy 27-7mo is an advanced 7% molybdenum super austenitic stainless steel offering corrosion resistance in most environments superior to 6% molybdenum super austenitic stainless steels. In many environments alloy 27-7mo offers resistance approaching that of much more highly alloyed materials such as inconel alloys 625, 22, and c-276.

Applications for incoloy alloy 27-7mo are found in the pollution control, power, marine, chemical processing, pulp and paper and oil and gas industries. Alloy 27-7mo offers a unique combination of corrosion resistance, high strength and ease of fabrication at an economical price.
Uns: s31277
View Complete Details

Nickel Base Alloys

  • Material Nickel Alloy
  • Diameter 0-10mm
  • Thickness 0-5mm
  • Application Automotive Industry
  • Color Golden
  • Feature Accuracy Durable, Auto Reverse, Dimensional
  • Surfae Finishing Power Coated

Hitesh Steel Manufactures and Exports a wide range of Nickel Base Alloys that are highly useful in various industries. They are available in various types such as hex bars, strips, tubes, sheets pipes, plates, coils, bars, etc.


Range :

  • Inconel
  • Monel
  • Hastelloy
  • Nickel
  • Copper alloy
  • Titanium
  • Alloy 20


Application Areas :

  • Steel Industries
  • Petrochemicals Cement Industries
  • Pharmaceutical Drugs Industries
  • Off-Shore Oil Drilling Companies
  • Engineering Units
  • Specialty Chemicals Industries
  • Hydro-Carbon Industries
  • Fertilizers Industries
  • Power Generation Industries
  • Pesticides Industries
  • Refineries
  • Gas Processing Industries
  • General Piping Industries
  • Construction Industries


Grade :

  • Nickel 200 (UNS No. N02200), Nickel 201 (UNS No. N02201), Nickel 205 (UNS N02205)
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Prakash Bhansali (Hitesh Steel)
  • 28, Sindhi Lane, Shop No. 4, Near Alankar Cinema, Bhuleshwar, Mumbai, Maharashtra - 400004
  • http://www.hiteshsteel.net
  • Share us via
  • Call 08048771222