Fuel Injection System & Assemblies #35142

Horiaki India Private Limited is a trusted brand of Steel Testing Plugs in India. We offer premium quality Steel Testing Plugs that are manufactured using premium quality raw materials like Nylon, HDPE, MDPE, Aluminium, steel. We also offer steel test plug double seal, aluminium double seal test plug, multi-lock steel test plugs, End of pipe testing/sealing plugs

These are provided in sizes from 1.5", for more strenuous effort oriented duties such as long immersion in water and higher temperature. The plugs are merely inserted into the pipe and the wings tightened to force the top and bottom plates together, thereby expanding the rubber ring to seal tightly in the pipe.

These are used for pressure testing and stopping all pipework from 1.5 inch (38 mm) upwards. They are manufactured with ½", 1” and 2" outlets as shown in the chart overleaf. The standard seals are made from natural rubber and special rubber seals are available for chemical applications where greater resistance is required. All plugs conform to British Standards BS 8005 for low pressure testing and sealing of pipes.

Applications :

Aluminium Pipe Plugs are suitable for low pressure testing or temporary closure and have traditionally been used for basic low pressure air or water testing of sewer or water pipes, maintenance in ground works and they are increasingly used for applications in the offshore industry.

• Topside applications in the offshore industry include:
• Temporary sealing gas of fuel pipes during hot work.
• General maintenance.
• Diving contractors finding subsea uses.

These combine with the traditional uses for domestic and industrial plumbing operations in blocking off water and drainage systems and testing during emergency problems or maintenance.

They are also used for ducting and conduits, swimming pools, masking in painting and casting industries, for leak testing, isolation, sealing, stopping and purging pipework. When transporting large vessels and tanks, such as heat exchangers, fractionation columns, shells for other petrochemical applications etc., Aluminium Plugs are used for sealing stubs and entries for interconnecting pipework so that the vessels can be sealed, with inert gas inside if necessary, to prevent oxidation or contamination during transportation.

In particular Aluminium Test Plugs are suitable for arduous duties such as immersion in chemicals and use at higher temperatures. For more complex applications, chemical and higher temperature resistant seals are available.

Indian Market

Jammu, Kota, Jalandhar, Jabalpur, Mumbai, Hyderabad, Bareilly, Varanasi, Kolhapur, Pune, Vadodara, Kanpur, Tiruchirappalli, Salem, Nashik, Jaipur, Kolkata, Surat, Delhi, Gorakhpur, Kozhikode, Aligarh, Amravati, Ghaziabad, Bhiwandi, Jamshedpur, Bengaluru, Aurangabad, Ahmedabad, Indore, Hubli Dhanbad, Thiruvanathpuram, Guntur, Guwahati, Patna, Nagpur, Warangal, Dhanbad, Faridabad, Belgaum, Dehradun, Madurai, Amritsar, Chennai, Chandigarh, Durg Bhilai, Meerut, Ludhina, Bhubaneswar, Asansol, Solapur, Agra, Rajkot, Coimbatore, Pondicherry, Bikaner, Bhopal, Moradabad, Vijayawada, Mysore, Allahabad, Cuttack, Jamnagar, Vishapatnam, Ranchi, Srinagar, Tiruppur, Lucknow, Mangalore, Jodhpur, Kochi, Gwalior, Raipur

International Market

Saudi Arabia, Kuwait, Bahrain , Algeria, Kenya, Tunisia, Angola, Morocco, Senegal, Egypt, Nigeria, Uganda, Libya, Liberia, Swaziland , Switzerland, Vatican City, Iceland, Sweden, Russia, Germany, Poland, Austria, Romania, Spain, Portugal, Hungary, United Kingdom, Denmark, Norway, Netherlands, Italy, Greece etc

Horiaki India Private Limited is a trusted brand of Aluminium Testing Plugs in India. We offer premium quality Aluminium Drain Testing Plugs that are manufactured using premium quality raw materials like Nylon, HDPE, MDPE, Aluminium, steel. We also offer steel test plug double seal, aluminium double seal test plug, multi-lock steel test plugs, End of pipe testing/sealing plugs

Our entire range is made to go through to extreme quality control checks to make sure they adhere to standards of global management systems. Consider our name for acquiring qualitative products in any quantity, safe and time-bound deliveries are what we ensure.

Centre locking drain test plugs with aluminium and steel plates, steel wing nuts and brass blanking caps shall be made as per requirement.

Majorly used for plumbing, sub-sea works, also suitable for air or water testing of domestic / industrial drains and sewers. We make aluminium plugs confirming to British standard BS 8005 for low pressure testing and sealing of pipes.

Applications :

• Aluminium Pipe Plugs are suitable for low pressure testing or temporary closure and have traditionally been used for basic low pressure air or water testing of sewer or water pipes, maintenance in ground works and they are increasingly used for applications in the offshore industry.
• Topside applications in the offshore industry include:
• Temporary sealing gas of fuel pipes during hot work.
• General maintenance.
• Diving contractors finding subsea uses.

These combine with the traditional uses for domestic and industrial plumbing operations in blocking off water and drainage systems and testing during emergency problems or maintenance.

They are also used for ducting and conduits, swimming pools, masking in painting and casting industries, for leak testing, isolation, sealing, stopping and purging pipework. When transporting large vessels and tanks, such as heat exchangers, fractionation columns, shells for other petrochemical applications etc., Aluminium Plugs are used for sealing stubs and entries for interconnecting pipework so that the vessels can be sealed, with inert gas inside if necessary, to prevent oxidation or contamination during transportation.

In particular Aluminium Test Plugs are suitable for arduous duties such as immersion in chemicals and use at higher temperatures. For more complex applications, chemical and higher temperature resistant seals are available.

Indian Market

Jammu, Kota, Jalandhar, Jabalpur, Mumbai, Hyderabad, Bareilly, Varanasi, Kolhapur, Pune, Vadodara, Kanpur, Tiruchirappalli, Salem, Nashik, Jaipur, Kolkata, Surat, Delhi, Gorakhpur, Kozhikode, Aligarh, Amravati, Ghaziabad, Bhiwandi, Jamshedpur, Bengaluru, Aurangabad, Ahmedabad, Indore, Hubli Dhanbad, Thiruvanathpuram, Guntur, Guwahati, Patna, Nagpur, Warangal, Dhanbad, Faridabad, Belgaum, Dehradun, Madurai, Amritsar, Chennai, Chandigarh, Durg Bhilai, Meerut, Ludhina, Bhubaneswar, Asansol, Solapur, Agra, Rajkot, Coimbatore, Pondicherry, Bikaner, Bhopal, Moradabad, Vijayawada, Mysore, Allahabad, Cuttack, Jamnagar, Vishapatnam, Ranchi, Srinagar, Tiruppur, Lucknow, Mangalore, Jodhpur, Kochi, Gwalior, Raipur

International Market

Saudi Arabia, Kuwait, Bahrain , Algeria, Kenya, Tunisia, Angola, Morocco, Senegal, Egypt, Nigeria, Uganda, Libya, Liberia, Swaziland , Switzerland, Vatican City, Iceland, Sweden, Russia, Germany, Poland, Austria, Romania, Spain, Portugal, Hungary, United Kingdom, Denmark, Norway, Netherlands, Italy, Greece etc

We use latest technology in the production process that allows us to customize the products in terms of composition of production raw materials as well as the overall design of the Mechanical stoppers Drain Testing Plugs. Furthermore, we place utmost importance on quality and therefore subject these Mechanical stoppers Drain Testing Plugs to strict quality checks at multiple points to ensure that the final product is free from any flaws or errors. Our product has been widely appreciated by clients and they have bestowed us with the tag of being one of the paramount Nylon Drain Testing Plugs Manufacturers in India.

Applications:

They are in normal usage for plumbing operations in a wide variety of industries, including domestic and industrial water and drainage systems. Also for ducting and conduit, plastic pipe bending, swimming pools, masking in painting and casting industries and many others.

As can be seen from the sectioned view, the unique assembly of the central waterway into the base plate via a snap taper fit and "0" ring seal provides a positive water and air tight joint. The provision of a friction reducing acetal copolymer thrust washer inserted between the wing nut and top plate facilitates easy expansion and release.

Sizes available are for pipe bore sizes. These plugs conform to ISO Standards for low pressure testing and sealing of pipes.

Notes :

• They are slightly less efficient at the extreme higher limits of expansion than in the middle and lower ranges
• Pressure testing depends upon the cleanliness and condition of the pipe bore
• Nitrile, silicone and viton rubber seals to resist different chemicals and higher temperatures are available from stock as accessories
• Operators using air or other gases to make leak tests must take the appropriate precautions

Get premium quality nylon drain testing plugs from Horiaki, Rubber Manufacturer company. It is one of the trusted supplier and importers in Germany, UK, Europe.

Indian Market

Jammu, Kota, Jalandhar, Jabalpur, Mumbai, Hyderabad, Bareilly, Varanasi, Kolhapur, Pune, Vadodara, Kanpur, Tiruchirappalli, Salem, Nashik, Jaipur, Kolkata, Surat, Delhi, Gorakhpur, Kozhikode, Aligarh, Amravati, Ghaziabad, Bhiwandi, Jamshedpur, Bengaluru, Aurangabad, Ahmedabad, Indore, Hubli Dhanbad, Thiruvanathpuram, Guntur, Guwahati, Patna, Nagpur, Warangal, Dhanbad, Faridabad, Belgaum, Dehradun, Madurai, Amritsar, Chennai, Chandigarh, Durg Bhilai, Meerut, Ludhina, Bhubaneswar, Asansol, Solapur, Agra, Rajkot, Coimbatore, Pondicherry, Bikaner, Bhopal, Moradabad, Vijayawada, Mysore, Allahabad, Cuttack, Jamnagar, Vishapatnam, Ranchi, Srinagar, Tiruppur, Lucknow, Mangalore, Jodhpur, Kochi, Gwalior, Raipur

International Market

Saudi Arabia, Kuwait, Bahrain , Algeria, Kenya, Tunisia, Angola, Morocco, Senegal, Egypt, Nigeria, Uganda, Libya, Liberia, Swaziland , Switzerland, Vatican City, Iceland, Sweden, Russia, Germany, Poland, Austria, Romania, Spain, Portugal, Hungary, United Kingdom, Denmark, Norway, Netherlands, Italy, Greece etc