Vices #6935853

Product Description :

Pin vices are used for holding small taps, drills, reamers, scribers, wire, small files etc. These are available in following type:

1. Pin Vices - Regular

The handles have a hole extending through the entire length which permit holding wires of any length or diameter upto the full size of the tool. These are available as individuals or as a set of 4.

2. Master Pin Vice

It has a single collet made of hardened steel, suitable for holding small drills, miniature tools etc. The opposite end has a large free wheeling swivel head.

3. Pin Vice - Double Ended

This double ended pin vice has reversible collets at each end.

4. Adjustable Pin Vice

This pin vice is especially useful for holding small drills, burrs, wires, files, reamers etc.

Product Description :

Category	Capacity		Overall Length		Body Diameter
	inch	mm	inch	mm	inch	mm
Pin Vices
	0-3/64	0-1	3.25/64	85	13/64	5
	1-32 - 1/16	0.75 - 1.5	3.15/32	87	15/64	6
	1-16 - 1/8	1.5 - 3	3.33/64	88	9/32	7
	1/8 - 11/64	3 - 4.5	4.3/32	102.5	5/16	8
Pin Vices - Double Ended
	0-1/8	0-3.2	4	100	3/8	9
Master Pin Vice
	0-1/8	0-3.2	3-21/32	92.5	3/8	9
Adjustable Pin Vice
	3-16 - 1/4	1 - 6.4	6.7/8	175	1	25

Details:

This ubiquitous Drill Vice is more than a fixture in any workshop. It is a necessity. These are specially designed for use by professionals who require a heavy vice.

Description

1. Manufactured from close grained cast iron, this vice offers a ground vice bed for smooth & consistent jaw movement
2. Jaws are hardened & ground with cross patterned 90 V-grooves in the stationary jaw facilitating holding of round jobs both horizontally & vertically
3. Jaws are hardened & ground with cross patterned 90 V-grooves in the stationary jaw facilitating holding of round jobs both horizontally & vertically

Jaw Width		Jaw Opening		Jaw Depth		Net Wt. Each
inch	mm	inch	mm	inch	mm	kg.
2-1/2	63	2-3/4	70	1	25	2.40
3-3/16	80	3-1/2	88	1-3/32	28	4.00
4	100	4	100	1-3/8	35	7.70
4-3/4	120	6	150	1-21/32	42	13.50
6	150	6-11/16	170	2	50	22.50

Details:

The Milling Machine Vice is one of the most popular vices used in workshops, machine shops and shop floor. Apart from use in milling operations, it also finds application in jig boring, grinding and shaping jobs.

Description

1. Manufactured from close grained hi-tensile seasoned cast iron, the vice body has a premium polychrommatic finish which is scratch and rust proof
2. Vice jaws made from fully hardened and ground tool steel allow the workpiece to be held dead square without use of any packing. This not only improves efficiency and life of jaws but also helps reduce strain on vice body
3. Usage of high tensile grade 10.8 fasteners provides greater strength and rigidity. The 360 swivel base allows the vice to be set at any angle along the vertical axis. Vice base has a milled slot which helps in accurate location of the vice on the machine table using rectangular locating nuts
4. "Hold Down" slots allow for secure clamping of the vice on the machine table

Jaw Width		Jaw Opening		Jaw Depth		Net Wt. Each
inch	mm	inch	mm	inch	mm	kg.
2	50	2	50	1	25	3.500
3	75	3	75	1-11/32	34	8.500
4	100	4	100	1-1/2	38	17.400
5	125	5	125	1-3/4	45	27.75
6	150	6	150	1-3/4	45	38.800
8	200	8	200	2-9/32	58	84.00

Product Description :

These steel hand vices have spring action jaws which open and close with wing nuts. Handles are hollow so that long wire can pass through. Jaws are smooth to prevent marring of soft metals.

Item	Jaw Size
F	1/4"
G	5/8"

Details:

Manufactured from graded cast iron, these drill vices have been designed for accuracy, making them ideal for engineering workshops and tool rooms.

Description

1. The base and slides are precision ground for stability and accurate operation
2. Horizontal & vertical V-grooves in the stationery jaw allows holding of rounding job securely
3. The base is slotted enabling the vice to be bolted to drill press tables, assisting in quick & accurate positioning

Jaw Width		Jaw Opening		Jaw Depth		Net Wt. Each
inch	mm	inch	mm	inch	mm	kg.
3	75	2-3/4	70	1-3/16	30	2.70
4	100	4	100	1-1/2	38	5.45
5	125	5	125	1-7/8	48	11.00

Details:

Manufactured from graded cast iron, these vices have a precision ground base and vice bed for smooth lateral movement of the movable jaw.

Description

1. Longitudinal and transversal prisms in the fixed jaw allow for firm gripping of round jobs of different sizes both horizontally and vertically. Special seat in jaws facilitates retaining of flat work pieces
2. Vices are equipped with a convenient unigrip mechanism. Spindle moves inside the hollow hand grip allowing the vice to be used at a location away from the table edge. This feature increases the scope of application of this range of vices

3 Way Drill Press Vice

This vice is also available with 3 mounting options via 2 additional precisely ground surfaces: end face and side face. This allows for drilling along all axes with a single setting of the job and holding of long workpieces which are cumbersome and difficult to manage in regular vices

Jaw Width		Jaw Opening		Jaw Depth
inch	mm	inch	mm	inch	mm
Drill Press Vice - Unigrip
3-3/16	80	2-3/4	75	1-3/16	30
4	100	3-5/8	92	1-3/16	30
4-23/32	120	4-3/8	110	1-3/8	35
3 Way Drill Press Vice - Unigrip
4	100	3-1/2	88	1-3/16	30

Product Description :

A light Vice mounted on Wooden Handle, Jaws are Tempered Heavey Duty 1.25" wide with an opening of 1", Total length 6.25 inch.

Weight:250 gms/pc

Product Description:

We are manufacturing complete range of small size vices for clamping of delicate small items. The type of vices generally used in Goldsmith workshop and show rooms, Means used by craftsman for light duty precision jobs. The body of vice are casted from 20-22 grade cast iron and main screw and handles are chrome plated.

Description

Jaw Width

32 mm

40 mm

50 mm

60 mm

Baby Vices are also available in Fix, Swivel & Clamp base in all sizes