Chennai, Tamil Nadu, India
Leading Manufacturer, Supplier & Retailer of Temperature Control Cabinet, Biological Safety Cabinet and Chemical Storage Cupboard.
Tripled walled construction with force air circulation system. 75mm glass wool insulation is provided in between the two walls. Inside chamber made out of aluminium or stainless steel as desired. Out side mild steel with MS powder coated and interventing walls G.I. The door is massive construction having glass viewing window and seals against atmospheric infiltration by resillent asbestos and rubber gasket. Humidity can be obtained from (atmospheric humidity to 95%) With a sensitivity of plus or minus 3% fitted inside the door. Separate water tank has been provided at the lower / vertical side of the cabinet. Humidification is either by steam vapours or by pump fitted with the water tank. Heating is accomplished by the aid of Nichrome elements. Temperature is controlled by imported digital temperature controller. Individually neon lamps and switches have been provided at the size of the cabinet, which can be used individually according to requirement. The temperature is recorded from the thermometer. Supplied complete with plug & cord for operation on 220/230 volts AC mains. HK-A13 Humidity cabinet : same as above but with cooling arrangement for use from 5 Deg. C. 50 Deg. C. Inner Chamber Size 710 x 455 x 455 MM 650 x 650 x 605 MM 910 x 605 x 605 MM
Negative pressure surrounds the work area with double wall plenums for protection. Air drawn through pre-filter is made to pass through highly effective HEPA (High Efficiency Particular Air) filters having efficiency rating as high as 99.99% with cold DOP and 99.97% with hot DOP, thus retaining all air-borne particles of size 0.3 micron and large. The highly efficient HEPA filter maintains the optimum cleanliness and purity. Being equipped with the prefilter, it can extend the life of HEPA filter. Aerodynamic airflow grills maintain safety and prevents blockage. U.V and fluorescent interlock available Ergonomic and comfortable 10 degrees sloped front window for comfortable head and elbow rest position, thus reducing fatigue Sash is counterbalanced for smooth and light weight operation with standard opening of 200mm ±10 mm for easier access to work zone and enhanced user safety. 30 % air exhaust 70 % air recirculation HEPA-filtered exhaust air in Type A2 cabinet may be recirculated into the room or exhausted to the outdoors through a canopy exhaust connection. HEPA-filtered downflow air is a portion of mixed downflow and inflow air from a common plenum Negative Pressure air surrounding all biological contaminated ducts and plenums.
|Class II Type A2 BIOLOGICAL SAFETY CABINET|
|Internal Dimensions (WxDxH)mm||600x600x600||900x600x600||1200x600x600||1500x600x600||1780x600x600|
|MOC||Internal Working Chamber : Stainless steel (SS-304) Exterior Cabinet : Cold Rolled Steel Duly Powder Coated or Stainless Steel (SS-304)|
|Pre – Filter||Mounted on aluminium frame, of rating 20 microns|
|Supply / Main Filter||HEPA(Efficiency 99.97% @0.3 microns to meet air quality ISO Class 4 equivalent to US FED STD 209 E, class 10)|
|Exhaust Filter||HEPA(Efficiency 99.97% @0.3 microns to meet air quality ISO Class 4 equivalent to US FED STD 209 E, class 10)|
|Power Supply||220 V/50 Hz (Standard)|
|Exhaust Connector (Option)||To exhaust potentially contaminated air outside the room|
|Exhaust Tunnel / Duct ( ?=200 mm) (Option)||Available on per running feet basis|
|Sash Lift||Can be lifted and adjusted manually|
CHEMICAL STORAGE CUPBOARDS are available with hinged glass doors or complete metal hinged doors. Chemical cupboards are provided with four adjustable shelves. Complete unit is finished with epoxy powder coating. This Cupboards can be provided alongwith suitable exhaust vent to pull out the fumes generated inside the cupboard. Choice Of Sizes 900 mm L X 300 mm W X 1800 mm H 900 mm L X 450 mm W X 1800 mm H