Switches And Switch Boxes

Our Complete range of products are Breaking Capacity AC, Techno MCB, Techno DC MCB and Electrical Switches.

Specifications: IS/IEC 60898-1
Number of Poles: 1
Tripping Characteristic & Rated: B Characteristics - 0.5A to 80 A
Currents (In) C Characteristics - 0.5A to 80 A
Rated breaking capacity (Icn) 10, 000 A
Energy Limiting Class Class 3 as per BS EN 60898
Rated Voltages (Ue) Single Pole: 240/415 VAC
Multi Pole: 415 VAC
Insulation Voltage (Ui): 660V
Rated Frequencies: 50/60 Hz
Impulse withstand voltage (Uimp): 4 KV (1.2/50Å)
Impulse power frequency voltage: 2 KV (50 HÅº)
Housing material: Polybutylene Terephthalate in Grey Colour
Degree of Protection: IP 20 as per IS/IEC 60898-1
Mounting Position: Any position
Mounting : Quick snap to mouting rails, 35 mm
Connecting Terminals: Combination box terminals on incoming and outgoing sides. Suitable for single - core, stranded and flexible conductors uto 25 sq mm, combination crosshead screw, max tightening torque 2 Nm
Electrical Service Life: Min. 30, 000 make/break operations
Ambient Temperature: Tmax : 55°C Tmin.:(-) 25°C
Impact Resistance: 3g. At least 2 impacts duration 13ms

Salient Features

CE marking fulfills the requirement of global standard.
Breaking Capacity 10 Ka (10000 Amp)
MID TRIP Technology.
Energy Saving: The low power loss as stipulated In the IEC 898/95, IS /IEC 60898-1.
DIN Rail Mounting : Techno MCB's can be mounted on standard 35mm DIN Rail by snap action.
Shock Proof : Finger and hand touch safe. Degree of protection IP-20. Protection against electric shock.
The housing of Techno of Techno MCB is injection moulded from special grade PBT. It can withstand high temperature and is impact resistant.
Contacts are made of special silver inlaid into copper strip, ensuring higher life fand maximum safety against contact welding and erosion. These contacts have low contact resistance resulting in reduced watt loss.
The high speed current limiting action ensures that the MCb operate before the full prospective fault current is allowed to develop.
Low let through energy as per energy limiting Class 3. And Low Watt Loss.
Techno MCB have a quick make & break Trip Free Mechanism. In the event of an over current or short circuit the MCB automatically interrupts all poles even if the MCB toggle is held in ON position, , the handle always indicates the correct contact position.
Potential free DIN Clip.

Specifications: IS/IEC 60898-1
Number of Poles: 1
Tripping Characteristic & Rated: B Characteristics - 0.5A to 80 A
Currents (In) C Characteristics - 0.5A to 80 A
Rated breaking capacity (Icn) 10, 000 A
Energy Limiting Class Class 3 as per BS EN 60898
Rated Voltages (Ue) Single Pole: 240/415 VAC
Multi Pole: 415 VAC
Insulation Voltage (Ui): 660V
Rated Frequencies: 50/60 Hz
Impulse withstand voltage (Uimp): 4 KV (1.2/50Å)
Impulse power frequency voltage: 2 KV (50 HÅº)
Housing material: Polybutylene Terephthalate in Grey Colour
Degree of Protection: IP 20 as per IS/IEC 60898-1
Mounting Position: Any position
Mounting : Quick snap to mouting rails, 35 mm
Connecting Terminals: Combination box terminals on incoming and outgoing sides. Suitable for single - core, stranded and flexible conductors uto 25 sq mm, combination crosshead screw, max tightening torque 2 Nm
Electrical Service Life: Min. 30, 000 make/break operations
Ambient Temperature: Tmax : 55°C Tmin.:(-) 25°C
Impact Resistance: 3g. At least 2 impacts duration 13ms

Salient Features

CE marking fulfills the requirement of global standard.
Breaking Capacity 10 Ka (10000 Amp)
MID TRIP Technology.
Energy Saving: The low power loss as stipulated In the IEC 898/95, IS /IEC 60898-1.
DIN Rail Mounting : Techno MCB's can be mounted on standard 35mm DIN Rail by snap action.
Shock Proof : Finger and hand touch safe. Degree of protection IP-20. Protection against electric shock.
The housing of Techno of Techno MCB is injection moulded from special grade PBT. It can withstand high temperature and is impact resistant.
Contacts are made of special silver inlaid into copper strip, ensuring higher life fand maximum safety against contact welding and erosion. These contacts have low contact resistance resulting in reduced watt loss.
The high speed current limiting action ensures that the MCb operate before the full prospective fault current is allowed to develop.
Low let through energy as per energy limiting Class 3. And Low Watt Loss.
Techno MCB have a quick make & break Trip Free Mechanism. In the event of an over current or short circuit the MCB automatically interrupts all poles even if the MCB toggle is held in ON position, , the handle always indicates the correct contact position.
Potential free DIN Clip.

Salient Features

Dual tripping system-overload through precisely caliberated bimetal and short circuit through electromagnetic coil.
DC MCB incorporate a built in permanent magnet, which direct the arc into the arc quenching chanber.
Free from nuisance tripping caused by vibrations.
Time constant < 5ms .
DC MCB offers a unique feature of knob assuming mid trip position in the event of fault. This enables clear visual indication of the faulty circuit.
Housing of DC MCB is made u of fire retardant, anti - tracking and non - hygroscopic injection moulded thermoplastic polyester.
Contacts are made up of silver inlaid copper, which ensure low resistance and longer life of circuit breaker.

Rating: 6AX, 250V AC & 10AX, 250V AC.
Finish: Smooth surface finish
Switch Size: 43.83 X 21.00mm
Weight: 20.05 gram.
Terminals: Shrouded Finger Protected Terminals Silver Plated Brass Terminals
Screws: Captive Minus Brass with Silver Plated (Brass parts weight= 6.31 gram.) (Heavy metal parts compared to all)
Base: Poly Carbonate, Fire Retardant V0 Grade, UV stabilized
Cover: Poly Carbonate, Fire Retardant V0 Grade, UV stabilized
Knob: Poly Carbonate, Fire Retardant V0 Grade, UV stabilized
Plunger: Arnite PBT -GF30 FR 30% Glass reinforced, Flame Retardant
Spring: Stainless steel spring
Screws: Brass with silver plated
Moving & Fix Contact: Copper with silver oxide plated Tip ( High Quality electrical Contact))
Silver Tip: Silver plated tip
Endurance : 100200
Life cycle : 50100
Temp. Rise before endurance: MAX: 12.2°C
Temp. Rise after endurance: MAX: 37.8°C
Flouroscent Test: Pass
Force to operate: OFF-230 gram. ON- 250 gram.
Contact Resistance: 25 mv
Sound level: ON : 25 OFF : 29
Product Packing: Laminated

Salient Features

Tell Us What are you looking for? Will call you back

Mr. Saurabh Sinha (HPL Electric and Power Limited)
76B, Phase 4, Sector 57, HSIIDC INDUSTRIAL ESTATE, Kundli, Sonipat, Haryana - 131028
Share us via
Found Something Wrong with this Listing? Report Here.

View Contact No.

HPL Electric and Power Limited Kundli, Sonipat, Haryana