High carbon steel shot is used in the majority of the wheel blast applications and creates a dimpled, peened surface. Only the shot’s skin suffers from the impact and very thin flakes will progressively part from the shot, which itself stays round...
High carbon steel shot is used in the majority of the wheel blast applications and creates a dimpled, peened surface. Only the shot’s skin suffers from the impact and very thin flakes will progressively part from the shot, which itself stays round...
Chilled iron is a hard abrasive making it suitable for etching purposes, but less resistant to impact. During the blasting process chilled iron breaks at an angle producing a permanent mixture of sharp grit with the ability to roughen up the hardest...
Steel Grit Steel Grit is a general-purpose manufactured abrasive used to remove thick coatings, heavy rust, and mill scale. It's fully angular shape cleans by aggressively cutting away at the surface leaving a uniform surface profile. Steel Grit is...
Physical Properties : Free-flowing, highly absorbent, a soft abrasive with a Mohs hardness of about 4.5, and biodegradable
Moisture Content : Typically specified as less than 10% for most applications.
Size available : 4-6, 6-8, 8-10, 10-16 us mesh
Particle Size (Mesh) : Available in various sizes, such as 4-6 mesh, 6-8 mesh ,8-10 mesh ,10-16 mesh and finer grades like 20-40 mesh (0.4-0.8 mm). also available in GM08, GM12,GM16, GM20, GM30, GM80,
Grit Size : Medium
Country of Origin : India
Material : Corn Cob, Made From The Hard Outer Part Of The Corn Cob,A Natural And Renewable Resource