Delhi, India
Our Products
Cold rolled strip is a steel product that is produced from a hot rolled strip that has been pickled. The coil is then reduced by a single stand cold roll steel mill straight away
Hot rolling is used mainly to produce sheet metal or simple cross sections. Hot rolled mild steel seems to have a wider tolerance for amount of included carbon than cold rolled.
Hot rolled coils contain iron oxide layers & rust thus making them unsuitable for direct use. With HROP process, we make a product with an enhanced surface finish due to the pickling process.
We manufacture various range of tube & pipes by using latest machinery and technology having capacity of production up to 20, 000 MT/Annum.
Our Precision Tube & Pipe Mill is a combination of equipment installed in a line for the production of High Frequency Induction Welded (HFIW) carbon steel tubes. The process involved is cold forming of carbon steel strip in circular shape, longitudinal welding, sizing, converting into Rectangular/Square shape and cutting to pre determined length.
Pipe cutting MethodWe are using state of art NC Cold Saw cutting NIL Burr free ends no burr during cutting, facing not required, Online Cutting with Servo Control Base Unit and Sim Motion Controller.
Our Range of Product:
| Outer Diameter | (10 - 51 MM)10, 12.7, 15.88, 19.05, 22.23, 25.4, 31.7, 38.1 & 50.8 mm |
| Wall Thickness | 0.3 - 2.0MM |
| Length | 5.0 8.0 Meter |
Our Quality Standard
| OD Accuracy of Round tubes | As Per IS/ASTM Standard |
| Tube Ovalty | As Per IS/ASTM Standard |
| Corner Radius | As Per IS/ASTM Standard |
| Pipe Cutting Length accuracy | +-1mm maximum in Cold saw |
IIPL design manufactures and supplying 2-HI / 4-HI / 6-HI CR plant complete with all auxiliaries and electrical with erection & commissioning at clients location.
We are engaged in research and development of precision Cold Rolling Technology and specialized in designing and engineering of cold rolling production line for strip material of carbon steel, high alloy steel, stainless steel and copper etc.
IIPL having complete facilities for supply , design and manufacturing hot melting steel plant for billets & re-bar etc.
We Design, Manufacture and Supply Section, Flat Strips, Coils, Bar & Rod and Wire Rod Mills for capacities up to 200, 000 TPA, specifically: Housing-less (Horizontal and Vertical) Mill Stands, Conventional and Pre-stressed Mill Stands, High Speed Blocks and Laying Head, Complete TMT System., Pinion Stands & Reduction Gear Box, Coilers (Eden Born & Garret), Coil Conveyors, Roller Tables & Tilting Tables, Shears (Flying & Rotary) for Crop and Cobble and Cooling Bed Dividing Operations, Cooling Bed (Turnover Type & Rake Type) and Bar Handling Equipment, Hot Saws (Pendulum & Horizontal Type), Cold Shears up to 250 Tons Capacity, High Speed Delivery System (Twin Channel) and Bar Braking Pinch Rolls
IIPL provide complete facilities for supply, design and manufacture of Hot Dip Galvanizing Plant with all auxiliaries and electrical with erection & commissioning at clients location.
We are Designer, manufacturers and supplier of Hot Dip Galvanizing Plant for Tube, Structures, Transmission Towers and Continuous Galvanizing Line. We are specialized in this field and one of our supplied Hot Dip Galvanizing Plant is successfully in operations in Saudi Arabia in the name of Sar Galvaco.
IIPL have complete rang of back up, Work rolls, Roll chokes and housing for CRM. Rolls, Mill stands, Housing for HRM and Rollers, Guides for Pipe/ Tube Mills.
We have fully equipped tool room along with CNC machines to manufactures precision equipments like C.R. Slitter, H.R. Slitter, CTL, and Crash guard Section Rolling with very high precision accuracy. We manufacture & supply for all industrial needs like Rollers for tube mills, cold rolling mills & hot rolling mills, Gearboxes, Thruster with break assembly, Coil Car/ Trolleys, Coolant Filtration Plant, Effluent Treatment Plant. Our dedicated team of technicians designs the best of all industrial equipments.
Raw Material ingredients for Hot melting plant like ferro-manganese, ferro-silicon, ferro-chrome, silicon-manganese.
Ferro Alloys is a mix alloy of iron with chromium, manganese, silicon, tungsten, molybdenum or vanadium. Ferro Alloys mainly used in steelmaking as a means of introducing these alloying elements into the cast or as deoxidizers. IIPL is Leading exporters of ferro alloys powder, low carbon ferro chrome powder, H.C. ferro chrome powder, stabilized FeSi powder, Mn metal Stabilized, ferro alloys powder, low carbon ferro chrome powder, H.C. ferro chrome powder , stabilized FeSi powder, Mn metal Stabilized, ferro alloys, ferro titanium, ferro niobium.
We supply best quality of Ferro Alloys all over the Globe.
IIPL provide complete facilities for supply, design and manufacture of Tube Mill with all auxiliaries and electrical with erection & commissioning at clients location.
FeAs designers, manufacturers and suppliers of Tube Mills for precision tube, section tubular rolling, water pipe, structural pipe and also API pipes as per international standards.
IIPL exports all electrical and factory automations products like AC/DC controls panels, Industrial switches, Transformers, AC/DC Motors, HT/LT Cables, Drives, PLCS, HMI and all kind of motion control drive systems.
We are expert in Factory Automation system with supplying Programmable Logic Controllers (PLC), HMI and all kind of motion control drive systems, machine vision system, integrated manufacturing systems and manufacturing execution system.
Consumables like all refectories/ mortars, bearings, Hot Melting Plant consumables, thermocouples, TC tips etc. are in IIPL s portfolio.
Grab is a mechanical device for clutching, lifting, and moving things, especially materials in bulk.
We manufacture all types of Grabs used for handling bulk cargos, Iron scrap, Limestone, Mill scale, BFG Slag etc.
HookA lifting hook is a device for grabbing and lifting loads by means of a device such as a hoist or crane. A lifting hook is usually equipped with a safety latch to prevent the disengagement of the lifting wire rope sling, chain or rope to which the load is attached.
Our range of different types of hoisting hooks is vast with a lifting hook too suit most lifting applications; weather used on a chain sling or on an overhead crane we probably have a suitable product options for Carbon hooks and Alloy hooks and bronze hooks for specialist load handling applications.
Overhead hoists are defined in the ANSI/ASME standards as a machinery unit that is used for vertical lifting service involving material handling of freely suspended (unguided) loads.
We manufacture various types of lifting medium ad operations type as per customer requirement
Lifting Medium TypesWelded Link Load Chain, Roller Load Chain, Wire Rope.
Operation TypesHand Chain Manual Power, Electric Power, and Pneumatic (Air) power.
Our Electro Lifting magnets can be used for handling bar stock, billets, bundles, coils, hot material, pipe rebar, plates, radioactive material, rails, scrap, slabs, slag and structurals.
Our Electromagnet is a combination scrap handling magnet with power supply installed in a rugged case on the magnet. A suitable hydraulic circuit, in terms of flow and pressure (and return line) is connected to the magnet. Most often a bucket / hammer or auxiliary circuit is readily available on the boom or stick. No electric line goes to the magnet and there is no installation required in the machine. Breaking the hydraulic flow through the valve begins an automatic drop circuit through electronic circuitry located within the-enclosure.
