Thermoplastic Acrylic copolymer possessing the excellent gloss and good adhesion to plastic, wood, metal and fabrics and it can be used in Paver Coating application. It can be used in clear lacquer for gloss enhancement. Thermoplastic Acrylic is...
Injection Molding: Melt Temperature: 180-280OC Mold temperature should lie between 30-50OC For thin wall objects molded at short cycle time it could be useful to cool down the mold down to 10OC Post mold shrinkage lies between 0.4 and 0.7%...
These resins can be classified in two groups according to their cross linking mechanism: Hydroxyl functional & Carboxyl functional. Hydroxyl functional acrylics are normally cross linked with amino resins, whereas the carboxyl functional acrylic...
These resins are an extension of Styrenated alkyds. They allow for greater formulation because of wide range of acrylic monomers available. These resins have very fast drying rate which helps them to be used in roller coating enamels, metal...
When adequate proportion of Veova is used in these polymers, they produce a tough film which has excellent water and alkali resistance. But such a polymer can be prohibitively expensive as Veova is a costly monomer which has to be imported into the...
POLYTONE® ABR Series Acrylic Bead Resins are polymers or copolymers of acrylic monomers for use in solvent applied lacquers, inks, speciality coatings & adhesives. These resins are available in fine granules and are thermoplastic in nature; they...
A shatter-resistant or lighter alternative to glass, Poly Methyl Methacrylate also known as PMMAAcrylicAcrylic GlassAcrylic Resin is a transparent thermoplastic. Chemically, it is the synthetic polymer of Methyl Methacrylate. Where extreme strength...
POLYTONE® ABR Series Acrylic Bead Resins are polymers or copolymers of acrylic monomers for use in solvent applied lacquers, inks, speciality coatings & adhesives. These resins are available in fine granules and are thermoplastic in nature; they...