Alcohol Sensor

Semiconductor Alcohol Sensor - TGS822 Gas Sensor, Color : Black

• Sensitivity : High Sensitivity To Alcohol Vapors
• Color : Black
• Model : TGS822
• Material : Semiconductor
• Operating Temperature : -10°C To 50°C

Alcohol Sensor Module

• Operating Voltage : 5V
• Model / Part Number : MQ-3
• Supply Type : Supplier
• Circuit voltage : 5V+-0.1
• Operating Humidity : 0-95%RH
• Target gases : alcohol
• Heater resistance : 33 ohm +-5%
• Preheat Duration : Over 24 hour

Alcohol Sensor

• Operating Voltage : 5 V
• Sensor Type : Semicoductor
• Concentration : 20- 10000 ppm
• Operating Humidity : 0- 95%RH
• Circuit voltage : 5V +/- 0.1
• Usage/ Application : Alcohol Detection
• Supply Type : Supplier
• Heater resistance : 33 ohm +/- 5%
• Load resistance : 200K ohm

Alcohol Gas Sensor Module

• Purity : High Sensitivity to Alcohol & small sensitivity to Benzine.Low Cost.Stable & Long Life.On board Power indication.
• Interface Type : Analog & Digital
• Supply Type : Supplier

Alcohol Gas Sensor, For Breathalyser

• Sensing element type : semiconductor
• Sensitivity : <0.6
• Product Number :  
• Part Number : MQ-3
• Resolution : 300 – 10000ppm
• Temperature range : -10 to 50 °C
• Target Gas : Alcohol
• Application : Alcohol detector, Breathalyser
• Input Voltage  : 5.0 (+/-)0.2 V DC/AC
• Power Consumption : 750mW

Alcohol Sensor

• Target gases : Ethanol Vapour
• Power supply needs : 5V
• Model / Part Number : MQ-3
• Pin Definition : 1-Output 2-GND 3-VCC
• Heater resistance : 33 ohm +-5%
• Operating Voltage : 5V
• Features : High sensitivity to alcohol and small sensitivity to Benzine,Fast response and High sensitivity,Stable and long life,Simple drive circuit
• Item Code : MQ-3
• Operating Humidity : 0-95%RH
• Load resistance : 200K ohm

Alcohol Sensor

• Operation Temperature : -10°C ~ 70°C
• Current Consumption : 150mA
• Operating Voltage : 5V ±0.1
• Concentration : 0.05 mg/L ~ 10 mg/L Alcohol

Fuel Cell Breathalyzer

• Accuracy : ±0.04 mg/L(±0.08‰) at alert point
• Display range : 0.000-4.000 ‰BAC;
• Sensor type : Electrochemical Fuel Cell Alcohol Sensor
• Battery : 3.7V: 250mAh

Alcohol Sensor

• Weight : 0.05Kg
• MQ303A is a semiconductor sensor for Alcohol detection. It has very good sensitivity and fast response to alcohol, suitable for portable alcohol detector. High sensitivity, Fast response and resume, Long life and low cost, Mini size....

Alcohol Sensor

• DIGITAL LCD DISPLAY WITH LIGHT BLUE BACKUP ADVANCED FLAT SURFACED ALCOHOL SENSOR PORTABLE & FASHION DESIGN QUICK RESPONSE AUDIO WARNING PRESET LIMIT SMART MCU CONTROL SENSOR FLAT DELF CHECKING DIRECT TESTING PROCESS LCD INDICATION LOW VOLTAGE...

Alcohol Sensor

• We supply technically sound Breath Alcohol Detector that identifies the blood alcoholic content in seconds. Our Digital Breath Alcohol Detector is available under the brand name of BACTRACK breathalyzer. Digital Breath Alcohol Detector, offered by...

Fuel Cell Breathalyzer

• We have introduced new and advanced Alcohol Breath Sensor - IBlow10  which is based on Advanced SURACELL Fuel Cell Sensor Technolgy. With this Alcohol Detector alcohol level of 12 persons per minute can be measured and results are also displayed in...

Alcohol Detector Gas Sensor

• Alcohol Detector Condition: New Size: approx. 32 x 22 x 27mm Main chip: LM393, ZYMQ-3 gas detector Working Voltage: DC 5V With signal output instructions Two-way signal output (TTL level output and analog output) TTL output effectively signal for...

Alcohol Sensor

Alcohol Gas Sensor

• Alcohol Gas Sensor Item Code: MQ-3 Our offered Alcohol Gas Sensor work similar to the common breathe analyzer and used for detecting the concentration of alcohol in breathe. These sensors provide analog resistive output on the basis of alcohol...