Call Us : +91-11-45822333

Cng Pressure Regulator Manufacturers and Suppliers

YOU ARE IN : Home / Business Directory / Kitchenware And Cookware / Cng Pressure Regulator

View 316 Products below

  • Cng Pressure Regulator

    a pressure regulator is a valve that automatically cuts off the flow of a liquid or gas at a certain pressure. Regulators are used to allow high-pressure fluid supply lines or tanks to be reduced to safe andor usable pressures for various applications. All cng applications require the use of a regulator. Because pressures in cng tanks can fluctuate significantly, regulators must be present to deliver a steady flow pr

  • Cng Pressure Regulator

    A pressure regulator is a control valve that reduces the input pressure of a fluid to a desired value at its output. Regulators are used for gases and liquids, and can be an integral device with an output pressure setting, a restrictor and a sensor all in the one body, or consist of a separate pressure sensor, controller and flow valve.Domestic PRV: These regulators are mainly used for household purpose and are suita

    Sicom Sales & Engineering Pvt Ltd

    Maharashtra | More...

  • Cng Pressure Regulator


    0-280 kg , 0-300 kg and 0-400 kg pressure gauge with standard quality minimum order quantity 1000 peace

    Maruti Enterprise

    Jamnagar | More...

  • Two Stage Pressure Regulator

    • Inlet end connection : ¼” NPT (F)
    • Inlet pressure : 210 bar (3000 psi)
    • Design Pressure : 1.5 times working pr.
    • Outlet end connection : ¼” NPT (F)
    • Supply pressure effect less than : 0.05%
    • Seat : PTFE/PCTFE
    • Max. Operating Temperature : PTFE - 66o C , PCTFE - 80o C
    • All connections : ¼” NPT (F)
    • Flow Coefficient : Cv 0.05
    • Outlet range : 0 to 25 bar (360 psi)

    Two Stage Pressure Regulator yields a delivery pressure change with varying inlet pressure which minimizes the supply pressure effect caused by decaying inlet pressure. The high pressure regulator is manufactured from stainless steel which prevent atmospheric corrosion and requires less maintenance.   Details : Designed with Stainless Steel Diaphragm Standard 10 µm stainless steel filter at inlet of main v More...

    Super Safety Services

    Mumbai | More...

  • Post your Buy Requirement

  • Gas Pressure Regulator

    • Size : DN15, DN20 and DN25
    • Suitable Gas : Argon
    • Working Pressure : 0.1-0.5MPa
    • Inlet Pressure : 15MPa
    • Outlet Pressure : 13.7-200 mbar depending upon
    • Application : Welding/ MIG/TIG

    We are backed by the most sophisticated transit system, thus buyers can stay rest assured for timely delivery of the orders. Assistance from the smart packaging system has enabled us to meet bulk and customized packaging requirements of the clients. In addition, our experts ensure safe packaging of the products. More...

    Devi Engineering

    Navsari | More...

  • Pressure Regulator

    • Preset Regulating : 20-30psi
    • Features : Durable, High Strength, Leakage Proof, Rust Proof, Safety Certified
    • Flow Rate : 100-200Lpm
    • Certification : ISI Certified
    • Material : Brass
    • Application : Gas Use

    We offer Pressure Regulators range that is designed to give high performance and caters to the requirement of numerous industrial applications. We offer different models of Pressure Regulators that is suitable for working in high temperature and pressure, . Today, we are listed as one of the prime Suppliers of Pressure Regulators. Applications : Filtering steam and high temperature gases and liquids Recovering cataly More...

    Devi Enterprises

    Rajahmundry | More...

  • Acetylene Regulators

    • SDA - 5 : Single stage Regulator with two gauge.
    • ECD - 1 : Single stage Regulator with single gauge
    • SDA - 3 : Single stage Regulator with single gauge.
    • SDA - 6 : Two stage regulators with two gauge. welding pressure 0 - 2.8 Kgf / cm2

    outtlet pressure gauge ranging form 0 - 2. 8 kgf / cm 2  and for cylinder content, gauge of pressure range 0 - 40 kgf / cm 2  are incorporated on the acetylene regulators.   More...

    Tejindra Electric Works (regd.)

    Delhi | More...

  • Air Pressure Regulator

    • Gauge size : 52 mm OD
    • Type : Non-Relieving
    • Gauge Port size : 1/8 BSPT(Fe)

    Pressure Regulator Diaphragm operated reduce the system pressure to a desired level and maintain it at a constant level despite change in inlet pressure and changes in downstream flow requirements More...

  • Pressure Regulator

    • Inlet,Outlet,Gauge port : 3/8”BSP, 3/8”BSP ¼”BSP
    • Maximum flow : 6 lpm
    • Air inlet pressure max (For air operated regulator) : 7 bar
    • Wetted Parts : 304 Stainless steel, Tungsten Carbide valve, PTFE
    • Maximum Inbound Pressure : 345 bar
    • Regulated Pressure (Spring operated) : 70 to 290 bar
    • Regulated Pressure (Air operated) : 30 to 290 bar

    spring operated 20 016 000 02 air operated 20 031 000 00 .

    National Enterprises

    Faridabad | More...

  • Air Pressure Regulator

    • Sizes : G1/4, G3/8, G1/2, G3/4, G1

    A pressure regulator is a valve that cuts off the flow of a air at a certain pressure. Regulators are used to allow high-pressure fluid supply lines or tanks to be reduced to safe andor usable pressures for various applications. • Sizes: G14, G38, G12, G34, G1 • Regulator • Regulator with NRV More...

    Dl Pneumatics

    Maharashtra | More...

  • Air Pressure Regulators

    • Weight( Kg.) : 0.120
    • Dimensions(mm) : 38 dia. X 57 height
    • Size BSP (F) : 1/8”, 1/4”

    Each Pneumatic operated equipment or instrument operates efficiently at a particular pressure. As line pressure fluctuates and is maintained at high pressure. Use of air pressure regulators facilitates the operation by reducing and maintaining uniform pressure. More...

    Raico Engineers, Mumbai

    Mumbai | More...

  • Post your Buy Requirement

  • Adjustable Pressure Regulator

    • Material : SS
    • Capacity : 0-6 kg/hr
    • Finishing Type : Painted
    • Inlet : 0.5-10 bar
    • Outlet : 0-2 bar
    • Minimum Order Quantity : 2500 Piece
    • Media Type : LPG

  • Air Pressure Regulator

    • Ambient Temperature : -20° C ~ 120° C (High Temp.), -40° C ~ 120° C (Low Temp.)
    • Size : 1/4”

    Our clients can avail a large gamut of highly efficient Air-pressure Regulators from us, which are engineered designed in adherence with the international quality standards. We have sourced these regulators from some of the genuine and legal vendors of the industry. Each product offered by us is well checked and analyzed on certain quality parameters that ensure their reliability and faultlessness. More...

    Aira Euro Automation Pvt. Ltd.

    Ahmedabad | More...

  • Gas High Pressure Regulator

    • Categories: : Gas Cylinder & Regulator, Gas High Pressure Regulator, Product Range
    • SKU: : GCR-01

    We offer gas regulators that are of high quality raw material like stainless steel and brass. The regulators comprise of inlet nipple, nut, washer, cylinder and delivery gauge, safety valve, and other parts.

    Laser Gases

    Delhi | More...

  • Pressure Regulators

    • Refrigerants : : R-717 (Ammonia), R-12, R-22, R-502 etc.
    • Media temperature range : : -50oC to +120oC
    • Max. operating pressure : : 28 bar

    Pressure and Temprature Regulators are specially designed for capacity regulation in refrigeration, freezing and air conditioning plant for ammonia and fluorinated refrigeration. SAR is a pilot operated main valve with screwed-in pilot valve or valves mounted in an external pilot line. External control pressure with electric on-off regulation complain with evaporate pressure regulation More...

    Superfreeze India Limited

    Gurgaon | More...

  • Vanaz R 4108 Ammonia Gas Pressure Regulator

    • Outlet Pressure: – 150 mbar : 30
    • Inlet Pressure: : 1 – 5 kg/cm2
    • Vanaz R : 4108

    Vanaz R 4108 manufacturer, exporter and supplier for NH3 gas regulator and are mainly used for ammonia gas. The trim parts for Vanaz R 4108 pressure regulator valve – PRV are of stainless steel. Vanaz R 4108 is preset type regulator and is mainly used as second stage pressure regulator. We also manufacture regulators suitable for corrosive gases like Chlorine gas, Sulfur dioxide etc. More...

  • Pressure Regulators

    • Features : Fluid: Compressed air Type: Relieving, non-bleeding Ports: 1-1/2" or 2"

    Ingersoll Rand pressure regulators are rated to 450psi (31 bar) and are high flow (2200 scfm at 150 psi) ensuring maximum performance of your start system.

  • Anitory Back Pressure Regulator

    • Inlet Pressure : Set Pressure
    • Silicon , EPDM B : ANSI SS 316L
    • :Seating and Sealing : ody Wetted PArt
    • UP to Ra . : < 0.4 micron . (220 grits)
    • Internal Finish : -5° C TO 130°C MAX
    • End Connection : Buttweld end, Tri clover end,
    • Temperature : 0 - 6 Bar 0.5 - 3 Bar
    • Size : 15 mm OD to 50mm OD

    This valve is designed to control and regulated upstream pressure that is inlet pressure of the valve. The basic working principal of the valve is spring and diaphragm type .This design is especially to meet the stringent sanitary and pharma cleanliness norms. There are no cavities in the valve body as well as in the diaphragm chamber as this is made out of pharma tube and the actuator, spring chamber is made out of More...

    Mangalam Industrial Products

    Ahmedabad | More...

  • Air Pressure Regulator

    • Temperature : 80 °C
    • Design Pressure : 18 kg/cm² / 250 psi

    Filter Regulators are designed for efficient filtration and stable pressure control. It eliminates moisture and dust particles from air and regulates the air to deliver various range of pressure requirements. The design is developed in a way to maintain its performance throughout its working time. More...

  • Pressure Regulator

    • 6.0-60 psi (0.4-4.14 bar) : - Optional
    • Fluid : Compressed Air
    • Adjusting Screw (M12)\r\n With Lock-Nut : Regulated Sec. Pr. Ranges
    • 30 bar : Operating Temp. Range
    • - Standard : Mounting
    • NITRILE, VITON : - Optional
    • Synthetic Rubber with PTFE Protection : Elastomers
    • P.M. NUT : -std
    • Type : Relieving
    • Gauge Port (2 nos.) : 1/4” BSPT (Fe)
    • Standard nominal flow rate (At supply pressure of\r\n 150 psi and 14.5 psi drop in sec. pressure of 87 psi) : \r\n 1/4" 82 scfm (39 dm3/sec) CV(1.55)\r\n\r\n 3/8" 173 scfm (82 dm3/sec) CV(3.26)\r\n
    • 12.5-125 psi (0.86-8.6 bar) : - Optional
    • EPDM : - Standard
    • 15.0-150 psi (1.03-10.3 bar) : - Standard
    • STAINLESS STEEL AS PER AISI 316\r\n SS 316 with NACE Compliance (MR 0175) : Diaphragm Assembly
    • Pipe Sizes : 1/4”, 3/8”
    • -50 to +120°C (for EPDM Elastomer) : Material of Construction :\r\n All Metalic Parts \r\n All External Parts
    • Wall Mounting Bracket : - Optional
    • -20 to +80°C   (for Nitrile Elastomer) : -20 to +180°C (for Viton Elastomer)
    • - Optional : 1/4” NPT (Fe)
    • Parameters : Specifications
    • Port Thread : NPT
    • Weight : 1/4” size : 2.00 Kgs

    FEATURES 'Shavo's' Pressure Regulator Model SR27 is designed as a highperformance product for instrument air use in corrosive atmospheres Applications include marine environments, oil and gas production, chemicals and food processing, medical analysis etc External Metallic parts meet NACE standard MR-01 75*  (*National Association of Corrosion Engineers MR-01 75 defines requirements for sulphide stress cracking resi More...

  • Gas Pressure Regulators

    • Application : Natural Gas
    • Brand Name : Medenus

    Being a quality-conscious firm, we make sure that the offered lot is prepared using the world-class raw material and modern work methods. Also, we source it from the certified vendors. Our organization is able enough to distribute consignments on schedule due to a productive supply chain network we have. More...

    Euromax International

    Delhi | More...

  • Pressure Regulator

    • Seat : Teflon
    • Bonnet : Brass
    • Remaining parts : SS 316
    • Outlet : 0 to 7 Kg/cm2
    • Diaphragm : SS 316
    • Inlet pressure : 240 Kg/cm2
    • Material Body : SS 316
    • SIZE : Inlet & Outlet 1/4" NPT(F)

    Madras Indl. Valves

    Tamil Nadu | More...

  • Lpg Pressure Regulator


    • Brand Name : Hitech
    • Pressure : Low Pressure
    • Application : Conversion kit,Industrial Level& for reduser Pressure
    • Color : silver
    • Size : Small
    • Quality : ARAI Approved

    Highly praised for presenting high-grade quality Hitech high pressure Reducer, we are a celebrated Supplier in the market. We are instrumental in offering the exceptional assortment of product that are deigned and manufactured only after complete examination of the raw materials and inputs used. Prominent amidst the leading supplier; count on us to avail the hitech Reduser high pressure reducer. Capitalizing on an ef More...

    Nirmal Industry

    Botad | More...

  • Hi Pressure Gas Regulators

    • OUTLET RANGES : 0 - 25 BAR
    • MAXIMUM INLET : 3000 PSI

    These regulators are intended for primary pressure control of non-corrosive gases at a maximum inlet pressure of 3000 psi. 

    Anil Engineering Co.

    Ahmedabad | More...

  • Domestic Low Pressure Regulator

    • Supply Ability : 1000 Piece/Pieces per Week
    • Brand Name : Raychem RPG Pvt. Ltd.
    • Place of Origin : Maharashtra, India
    • Packaging Details : International Standard Packing

  • Back Pressure Regulator

    • Type : Back Pressure Regulators
    • Brand Name : Axis Solutions Pvt Ltd.

    The Back Pressure Regulator maintains constant pressure and constant flow for analyzer simultaneously protecting critical sampling componentsas a relief valve.A Back Pressure Regulator is a control valve which maintains a set pressure on the upstream side of the valve. If the pressure increases, the regulator opens to allow additional flow through the BPR1 / BPR2. As the pressure decreases the regulator closes to res More...

    Axis Solution

    Ahmedabad | More...

  • Gas Pressure Regulator

    • Brand Name : TECNOGAS

    Energy combustion, ahmedabad a local source of all types of tecnogas make products. we are distributor of all types of tecnogas make gas pressure regulator rg series size:-1" inch , 1 12' inch , 2" inch , 3" inch inlet pressure:- 2 bar and 5 bar gas filter fm series size:-1" inch , 1 12' inch , 2" inch , 3" inch inlet pressure:- 6 bar slum shut off valve mvb series size:-2" and 3" safety relief valve mvs series size: More...

    Energy Combustion

    Ahmedabad | More...

  • High Pressure Regulator

    • Model : Shp - 5
    • Value seating material : - Tefcon
    • Input pressure range : - 0- 250 bar
    • Output pressure range : - 0- 250 bar
    • Material of construction : Forged brass
    • Regulating mechanism : Piston type
    • Guages : - Brass, 2 "dial, thread 1/4" npt

    These regulators are used in applications where extra high pressure is required. These can be designed to give output pressure from 50Bar to full input line pressure. More...

    Tewelding Engineers

    Delhi | More...

  • Pressure Regulator

    • Max. Output Pressure : 150 PSI
    • Max. Input Pressure : 250 PSI

    We offer pressure regulator. saga air pressure regulators are designed for precise control of compressed air pressure, built very compact to save space, it ensures significant saving in air consumption, uniform equipment performance, excellent flow characteristics, higher flow capacity rate, lower differential pressure and longer service life. Also economically priced. More...

    Saga Industries

    Thrissur | More...

  • High Pressure Regulators

    •  Inlet Pressure : Up to 250 Kg./Cm.Sq.
    • Material of Construction  :  Brass and Stainless Steel-304
    • Outlet Pressure : Until available source pressure
    • Flow Rate :  Up to 500 Lpm (30 Cubic Mtr./Hr)

    High Pressure Regulators are specially designed for use in systems where a high delivery pressure is required. High Pressure Regulator reduces and regulates the available source pressure until it’s nearest available source pressure.High Pressure Regulators are available in many different combinations of materials and thread connections to suit to individual industry requirements. More...

    Shreeram Enterprises

    Indore | More...

  • Pressure Regulator

    • Spring : Spring Steel
    • Body, Cover, Spring Seat, Bush : Aluminium
    • Diaphragm : Fabric reinforced nitrile rubber
    • Operating pressure : 100, 150, 200 PSI
    • Other parts : Stainless Steel and Brass
    • O-Ring : Viton Rubber

    Pressure regulator is used to regulate pressure in compressed air systems Specifications :

    Ryder Equipments P Ltd

    Coimbatore | More...

  • Material Pressure Regulator

    • Type : Pressure Gauge Regulator, Pressure regulators
    • Brand Name : DOPAG

    Perfectly constant material flow DOPAG material pressure regulators are used to reduce the feed pressure down to the required operating pressure. As well as accurately regulating material pressure, these valves will also compensate for pulsations that occur as a result of the reciprocating action of piston pumps. Pulsations cause a brief decrease in pressure that could lead to a slight reduction in the flow of materi More...

    Dopag India Pvt Ltd.

    Bangalore | More...

Related Products

Fuel Pressure Regulator | High Pressure Gas Regulators | Lpg Pressure Regulator | Gas Pressure Regulator

Tell us your Buy Requirement to Get Instant Response

Is this page helpful?
Average Rating per Visitor out of 5 ( reviews)