Features : Pressure Module consists of pre-filter & Hepa Filter, Specially designed carriage wheels to take care of batch load, Pneumatically operated 100% sealed dampers
Controller : JSC-0D Digital PID Controller ±0.1 oC Digital PID Controller with LED Display Automatic START/STOP timer
Dry Heat Sterilizer is a common instrument to be used to drying, heating and sterilizing objects by heating air up to 160 oC or 180 oC with gravity or forced convection system during specified sterilizing exposure time range from 30 to 60 minutes of sterilization exposure time...
POWERTECH MAKE Dry Heat sterilizers( HOT AIR STERILIZER) are made for sterilization of “empty vials, ampoules and bottles”, which can withstand a temperature upto 285°C Special Features : • Class 100 hepa filter can be fitted inside and...
Dry Heat sterilizers( HOT AIR STERILIZER) are made for sterilization of “empty vials, ampoules and bottles”, which can withstand a temperature upto 285°C, Class 100 hepa filter can be fitted inside and outside. The temperature variation inside the chamber will not be more...
Transfer trolley : Fabricated from S.S. 304 Quality Angles & flats with castor wheel for sterile & Non-sterile room.
Finishing : All stainless steel components buffed to matt finish.
Insulation Wall : 125mm (t) Mineral Wool. A grade mineral wool insulation to optimize heat effectiveness and stop heat loses.
Material of Construction : Interiors with 14 gauge S.S. 316 quality sheets. Exteriors with 16 gauge S.S. 304 Quality sheet. Frame work of Rolled steel sections 6, 5 & 3mm. the interior frame work of S.S 316 quality
Trolley : Fabricated from AISI SS 316 Quality angles & flats with ‘U’-Grooved Stainless Steel wheels.
Air recirculation : A 2 H.P. 1440-RPM motor drives the impeller. Air enters the Chamber through perforations provided passes horizontally over the charge and is re-circulated.
Scanner : A six point Digital Scanner is incorporated, with facility of Hold & Scan at all six points.
Exhaust damper : Controlled by solenoid valve and is opened during the initial heat-up, shuts off and re-opens during cooling cycle.
Cooling Coils : Crimped Finned Tubes with headers, S.S. 304 Quality to speed up cooling cycle.
Dry heat sterilization and depyrogenation are used for complete destruction & removal of all micro-organisms by means of dry heat. These stainless steel dry heat sterilizers use air as a medium of sterilization. OPERATING TEMPERATURE It employs...
Salient Features Complete GMP model. Basic structure made from M.S. Heavy angles. Sterilizer inner walls made from AISI SS 316 and outer walls made from AISI SS 304. Doors provided on both sides, one opening is in non-sterile area and second opening...
Sterilization by dry heat has become increasingly popular worldwide due to two reasons first the need to sterilize small objects, particularly ampoules, syringes and secondly for de-pyrogenation of manufacturing apparatus which is not possible in a...
Sterilization by dry heat has become increasingly popular worldwide due to two reasons first the need to sterilize small objects, particularly ampoules, syringes and secondly for de-pyrogenation of manufacturing apparatus which is not possible in a...
Dry heat sterilizers Fully Stainless steel model.Double door with pneumatic interlock.PLC based Control panel with 8 point temperature.Timer for Heating Cooling.Printing port for feed & actual process data printing.3 Separate password for operations of panel....
SALIENT FEATURES : Ambica Boiler & Fab. depyrogenation steriliser are capable of performing up to 280 ° C, during the entire cycle. We have achieved this, due to our unique chamber construction and filter suspension system, and our never ending...
Dry Heat Sterilizer is effective mode of sterilization. It is an equipment with electric resistors distributed inside the cabinet that is isolated with a panel for temperature control. Dry heat will penetrate all kinds of materials, such as oils,...
NAT's pharmaceutical sterilizers have been engineered and manufactured in compliance with the cGMP regulations to meet the technical challenges of the pharmaceutical and biotech industries. Your products will be reliably and consistently sterilized...
All stainless steel CGMP construction or stainless steel interiors with mild steel exteriors on non sterile side. Class 100 sterilizers. Electromechanical control panel or microprocessor based control panel Cooling coils for rapid cooling during...
Features: All stainless steel CGMP construction or stainless steel interiors with mild steel exteriors on non sterile side. Class 100 sterilizers. Electromechanical control panel or microprocessor based control panel Cooling coils for rapid...
the dry heat sterilizer is used for the sterilization of glass ampoules, vials, containers and vessels in the pharmaceutical and biotechnology industry. Dry heat sterilization is also used for the sterilization of machine components. This dry heat...
SALIENT FEATURES : MICRO PROCESSOR for process operations with 10 PROGRAMME HEPA FILTERED AIR MODULE in inlet S.S. Construction 8 Chanel Temprature Scanning with Processor MIMIC Display on Control Panel Helps for FAULT FINDING Cooling attachment for...
CPAC Equipment Inc. (CEI) is the largest manufacturer of Class II, dry heat sterilizers for the medical, dental, and ophthalmology markets. Dry heat sterilizers are the preferred method of sterilization for instruments that may rust, dull or corrode...
Timely delivery of the orders is assured with us as we are backed by one of the most sophisticated transportation facility. Stay rest assured for the products that we offer as they will remain damage free. For this, we make use of only premium...
We are one of the leading dry steam sterilizer manufacturers as well as suppliers, located in India. The holders of our durable Dry Heat Sterilizers are made-up of AISI 316L stainless steel ensuring their high level of strength. For the fast...
Features : Micro Processor for Process Operations with 10 Programme Hepa Filtered Air Module in Inlet. S.S. Construction 8 Chanel Temperature scanning with Processor mimic Display On Control Panel Door Inter Locking helps for Fault Finding Cooling...
We are offering dry heat sterilizer. We are offering a wide range of dry heat sterilizer and industrial heat sterilizer. salient features • total gmp model • class 100 filter provided at air inlet in chamber. • pre filter provided at air inlet...
We are offering dry heat sterilizer. we are offering a wide range of dry heat sterilizer and industrial heat sterilizer. salient features * total gmp model * class 100 filter provided at air inlet in chamber. * pre filter provided at air inlet &...
Forced convection system ensures good mixing, strong dispersion and maintains higher temperature uniformity inside the chamber. Most ideal for various experiments in microbiology, cell cultivation of animals and plants and food for various...
Special arrangement of baffles is made for the uniform distribution of air inside the chamber. Detachable motor with dynamically balanced impellers supported independently on heavy duty bearing....
APPLICATION : Used to store WFI (Water for Injection) at 85 to 90ºC. Temperature. In Closed loop. CAPACITY : 100 to 10000 Ltrs. (Above capacity on demand) TECHNICAL SPECIFICATION : Design as per ASME guideline and user requirement. No...
We have made our mark as a capable Manufacturer and Supplier of Class 100 Dry Heat Sterilizer from Tamil Nadu, India. We are supported by a team of skilled and experienced professionals who make use of premium stainless and steel and latest...
Dry heat sterilizers are easy to install and requires low operating costs; Penetrates and sterilizes the materials efficiently Does not harm the environment and is non-toxic. Completely non-corrosivefor metal and sharp instruments such as medical...
Features Complete GMP model. Basic structure made from M.S. Heavy angles. Sterilizer inner walls made from AISI SS 316 and outer walls made from AISI SS 304. Doors provided on both sides, one opening is in non-sterile area and...
Dry Heat Sterilizers are designed to meet Sterilization and Depyrogenation requirements in pharmaceutical and biotechnology industries. As the name suggests, these sterilizers use dry heat (hot air) for sterilization. Dry Heat Sterilization is the...