To make flanging at the ends of the can for firm holding and crimping of the lid. Technical specifications: output : 25 cans minute depending on the operator’s efficiency minimum inner diameter of the can : 22 mm maximum inner diameter of the can : 150 mm maximum height of labemore...
Principally used for joining sheet metal at right angles on straight runs, the machine comes complete with Pittsburgh rolls. Auxiliary shafts are fitted as standard, onto which double seam rolls can be fixed. When the flanging attachment is used with the machine (as illustrated) more...
Only quality-tested material is used for preparing the offered lot. As a result of which, we our offerings stand high on the expectations of the clients. We are backed by a well-structured and capacious storehouse that assists us in furnishing urgent and quick requirements of themore...
SPECIFICATION : Min. Corner Radius 100 mm (4 in) and Forming Speed 3 m / min.
16 gauge power flanging machines are used for forming a right angled flange on curves, straights and irregular shapes.the machine has a tilting head for forming complete circles. more...
Edge grinding is very special operation in manufacturing of drums & barrels, because some amount of material is to be removed from the edges of the body which give advantages to a) welding operations 9removes dirt, oiliness etc), extra strength to the weld and a leak proof joint.more...
This machine is required for giving flange to the drums or barrel, by changing the rollers, the same machine can be used for single beading too. more...
One set of flanging rolls included, One set of cutting blades included, 2 Rotation speed with max. torque selection 7-21 mmin, Top and bottom flanging rolls powered in rotation with planetary reducers, Both flat and crowned Bottoms flanging, Motorized manual adjustable bottom heimore...
Mechanical clutch operated type bump flanger is very useful for flanging both ends of the cans at a time. Also this machine gives a perfect circular shape to the can body. This machine can handle full range of Round cans by changing flanging tools of different sizes. The flangingmore...
1. Capacity : Â 250 ml to 15 Kg tin (Available in two models )
This machine can handle Tins for Rectangular shape for 1/4 to 5 Ltr and 15 Liters Flanger in one stroke gives the universal flange on one side of the body and has good production capacity to meet the target of the other line machines. The change part is made out of OHNS steel, hamore...
This machine is very useful to flange the can body in one operation from both the side. The Machine can adjust from smaller to biggest and by adjusting the length of box. the standard roller given for all size cans, is very easy to adjust and maintai more...
This machine can handle Tins for Rectangular shape for 14 to 5 Ltr and 15 Liters Flanger in one stroke gives the universal flange on one side of the body and has good production capacity to meet the target of the other line machines. The change part is made out of OHNS steel, harmore...
This machine can handle Tins for Rectangular shape for 1/4 to 5 Ltr and 15 Liters Flanger in one stroke gives the universal flange on one side of the body and has good production capacity to meet the target of the other line machines. The change part is made out of OHNS steel, hamore...
machine gives a perfect rectangular shape to the container body. The tools are made out of WPS, (HCHC) material hardened and ground finished for durability and high tolerance. The machine is made of C.I. casting bed & steel base. The machine is capable for inter changing the toolmore...
This machine is required for giving flange to the drums or barrel, by changing the rollers, the same machine can be used for single beading too. The illustrated model has flanging tool where in one stroke, we get one side flanging & by turning the body we get another side flanginmore...
The machine is required for giving flange to the drum or the barrel. For getting good seam, proper even flange is essential. This machine contains two flanging tools made out of good quality steel, which are heat treated and ground is also has a separate hydraulic power pack of amore...
Power Flanging - Lockformer turns up the power These ductwork prep machines automatically follow any edge -curved or straight. Use the convenient table slot to turn up a "starting flange" and let it go! A calibrated dial can be set for radii as small as 3-1/4" / 83 mm (or 2"/ 5more...
The machine is very substantially constructed, the flanging plate is made of oil toughened, tool steel, link pins, ulcrum pins etc. are case hardened and the forming block and clamping sides are hand bedded to specially prepare templates. The Machine is made for high production wmore...
engaged in Flanging machine manufacturing and supplying a wide range of Mattress Flanging Machine. This Mattress Flanging Machine is made by using excellent quality of raw material. This Mattress Flanging Machine is extensively used for giving flange to the drums or barrel. Furthmore...
Our Head Flanging Machines use a method that bends the material in a manner similar to a press brake bending a plate, the difference being that the work piece is rotating through the forming rolls more...
We are offering universal swaging, tanying, cladding, wiring, closing, joggling, flanging machine. universal swaging machines will perform a multitude of rotary operations in sheet metal ‘m&b’ universal swaging, wiring, jeunying and closing machines universal swaging machine more...
 Power Flanging Machines are principally used for forming a right angled flange on curved, straights and irregular shapes. The machine has a tilting head for forming complete circles. Specifications Max. Sheet Thickness : 1.5 mm (16g) in Mild Steel Min. Corner Radius : 100 mm (more...
We are offering double ended flanging machine manufacturers, exporters, and suppliers located in india our double ended flanging machine is equipped with two flanging tools and is fabricated using high quality steel. Our double ended flanging machine gives an appropriate end seammore...