Number Of Flower : Electro Pneumatic Valve Positioner
Brand Name : YTC
The Electro-Pneumatic Positioner YT-1000L is used for operation of pneumatic linear YT-1000R is used for operation of pneumatic rotary valve actuators by means of electrical controller or control system with an analog output signal of DC 4 to 20 mA...
Benefits : Excellent vibration resistance,Field reversible,Easy and fast to calibrate Etc.
Purity : Rugged construction, few parts, small moving mass, compact design and rigid mounting provide outstanding vibration resistance.Changes in supply pressure and valve load have minimal effect on positioner operation.
Neles NE700NP700 positioners are designed to operate on every control valve actuator and in all industry areas. offers a rugged construction with few parts. A small moving mass and rigid mounting provide excellent resistance to vibration. NE700NP700...
An I/P module with consequent pneumatic intensifier is utilized to control the pneumatic actuator. The well-demonstrated I/P module relatively changes over the lasting electrical setpoint motion from the CPU into a pneumatic flag used to change a...
TEMP RANGE (Operating) : - 20o - +60oC Standard. , - 40oC to specification.
The P3300i series of valve positioners is a milliampere signal version of the P3300 pneumatic valve positioner. It utilises all the features of the P3300 but can operate from a standard 4-20 mA signal....
Pneumatic positioner is an useful interlinking device controlling cylinder valve movement in proportion to pneumatic signal ranging between 0.2 to 1 bar (3 to 15 psi) or split ranges. The salient features of Schrader Pneumatic Positioner are:...
Options Available : Position transmitter(4...20mA output signal) , - Limit switches (open and close at any two points) , - Gauge block with two stainless steel pressure gauges and - Explosion proof type (Exd B T6,Exia C T6)
SEL & SER Series accomplish a high dynamic response with piezoelectric technology and provide an easy and fast setting user interface, Features Simple and easy to set Precise control performance and high dynamic response Pressure regulator built in to eliminate variations in...
EPL & EPR Series are the rugged control devices which stand up to harsh environment and engineered to meet the highest and most demanding control performance that the process industries of today require. Features Easy maintenance Precise calibration...
IPC is an advanced two -wire IP converter with piezoelectric technology which produces a pressure output single directly proportional to 4...20mA input signal and guarantees excellent accuracy , high reliability , and stable long for the valve...
Explosion proof I, IIA, IIB and IIC Maximum current permissible 2 Amp AC/ DC resistance Shatterproof Ploycarbonate Dome Easily settable colour coded cam The locked serrated cams, ensures the secured ...
Special polyethylene low pressure diaphragm direct acting valve ensures quick and precise response to minor changes in signal pressure Zero hysteresis increases overall efficiency Compact design, rugged construction with as rigid ISO 5211 mounting...
We offer Pneumatic Positioner – RTX1200. Compact design, rugged construction with as rigid ISO 5211 mounting , IP66 protection and CE certified. Simple to convert from direct acting to reverse acting or vice versa....
700 FC Series Valve positioners converts a controller output (usually 3 to 15 psig or 4 to 20m ADC) to LinearlyRotary proportional TravelRotation & Pneumatic outputs. The Valve positioners are based on a force balance design for control applications that requires a high degree...
Description The FLUCON 703/704 FC Series Electro - pneumatic positioners are used as final controlling element for operation of pneumatic Rotary/Linear valve actuators in correspondence with an input signal of 4-20 mA DC or split ranges. The...
The Electro-Pneumatic Positioner GT-100L is used for operation of pneumatic linearvalve actuators by means of electrical controller or control system with an analog output signal ofDC 4 to 20mA or splitranges....
The Electro-Pneumatic Positioner GT-100L is used for operation of pneumatic linearvalve actuators by means of electrical controller or control system with an analog output signal ofDC 4 to 20mA or splitranges....
Tecnik's Pneumatic Positioners are available as single or double acting, force-balanced instruments that provide fast, sensitive and accurate positioning of diaphragm or cylinder actuators. Designed for high performance these Positioners are...
Features - Auto-Calibration for optimum conditions - Precise control performance and high dynamic response - Easy operation with four-key pads and full text graphical LCD - Single and double acting actuators - Low air consumption due to piezo...
YT-1000L Electro Pneumatic positioner is used for operation of pneumatic valve actuators by means of electrical controller or control system with an analog output signal of DC 4 to 20mA or split ranges....
YT-1050, the Electro Pneumatic positioner is used for operation of pneumatic valve actuators by means of electrical controller or control system with an analog output signal of DC 4 to 20mA or split ranges....
Explosion proof type 4way solenoid valve, YT-700D series outputs pressure to valves or changes output port direction. - Explosion proof type (ExdIICT6) solenoid valve. - Replacement of coil is easy due to AC and DC applied in same enclosure. -...