Call Us : +91-11-45822333

Tilting Table Manufacturers and Suppliers

YOU ARE IN : Home / Business Directory / Institutional Furniture / Tilting Table

View 42 Products below

  • High-low Tilting Table

    • Patient weight capacity : 525 lb. (238kg)
    • Table tilt range : 0° (horizontal) to 90° upright
    • Tilt speed : ~4°/sec (~20 sec to full stroke)

    We are manufacturer and exporter of wide range of tilting table, we offer high-low tilting table FEATURES Motorized tilt from horizontal to 90° upright with wire remote control 525 lb. patient weight capacity Ultra-stable during tilt motion and in any table position Standard 220 volt operation with emergency battery back-up 5” locking casters and lightweight table for easy transport Built-in footboard Tabletop pad More...

    Hms Medical Systems

    Chennai | More...

  • Tilting Table

    • Size : 5x7", 7x10", 10x15"

      APEX Code 723 Tilting Table ( Size : 5x7", 7x10", 10x15" )   Features : Special design for angle setting on various machine tools. Low profile for larger working space. The table is set manually to the required Tilt and is locked in the set position by means of two locking clamps held through bolts. Can be adjusted by 45 degree on both right-hand and left- hand side. The angle marking are accurate and easy to rea More...

    Apex Industries

    Jalandhar | More...

  • Tilting Table

    • SIZES : 125 x 175 mm

    Heavy and sturdy machined castings. Range 45° each way from vertical. Locking action by 2 clamping Screws on each end. Low profile for low machine head clearance. 3 Machined "T" slots and precise ground table surface.

    Simran Tools

    New Delhi | More...

  • Tilting Table For Radial Drill Machine

    • Number of T-slot : 3
    • Height : 300 mm
    • Approx Weight : 100 kg.
    • Manufactured from High- : Grade Casting.

    TILTING TABLE FOR RADIAL DRILL MACHINE   Use For Redial Drill Machine 0 – 60 Degree Range (Both Side). Height : 300 mm Manufactured from High-Grade Casting. Number of T-slot : 3 Approx Weight : 100 kg. More...

    Ravi Machine Products

    Rajkot | More...

  • Tilting Table

    • Size in MM : 300 x 150 x 110,400 x 300 x 200

    Cast Iron Tilting Table is a useful accessory for setting work at an Angle for Milling or other operations. The Table has Machined T-slots along length and can swing up to 45º on either side. For setting purpose a degree scale, reading minimum one degree, is graduated on the end face of cylindrical base itself. This ensures better setting accuracy. The Table is set manually to the required tilt and is locked in the More...

    Micro-flat Datums Pvt. Ltd.

    Anand | More...

  • Tilting Table

    • Table Size mm : 100 x 125, 150 x 200, 200 x 250
    • Table Size Inch : 4 x 5, 6 x 8, 8 x 10

    Heavy and sturdy Machined construction. Range 45 Degree each way from Vertical. Locking action by 2 clamping screws on each end. 3 Machined “T” slots and precise ground Table Surface. Swivel Base Model Swivel Graduation 360 Degree. More...

    Abm Tools

    Delhi | More...

  • Post your Buy Requirement

  • 3 Inches (75 Mm) Tilting Rotary Table

    • Diameter : 3 inch
    • Type : 3 Inches (75 mm) Tilting Rotary Table
    • Model Number : AMTRT-75.4
    • Brand Name : ASSORTS
    • Place of Origin : India
    • Material : Alloy Steel & Cast iron

    Designed to tilt between 0- 90 degrees & can be locked at any position. Table diameter - 3 inches (75 mm) height - 47 mm worm- gear ratio - 36:1, which basically means that the 1 rotation of the handle shall rotate the table by 10 degrees. Can be used both in horizontal & vertical postion. More...

    Assorts Machine Tool Co.

    Ghaziabad | More...

  • Tilting Tables

    We are engaged in the manufacturing of well constructed  Tilting Tables . The Tilting Tables are highly appreciated in the market and there has been consistent increase in their demand. Assuring high performance and durability, our Tilting Tables can be availed at market leading prices from us. Tilting Tables can be availed from us in various sizes as per the size of the Radial Drilling Machines. Description Two w

    Faiz Engineering Works

    Batala | More...

  • Tilting Table

    Cervical & Lumbar Traction System versatile and easy to operate traction machine with both static and intermittent treatment modes. The SM12 Traction machine features variable speed control with clear displays of all treatment settings and is available separately or as part of a traction package with table and accessories. Choice of intermittent or static traction modes Variable speed control with quiet operation thr

  • Tilting Table

    Backed by rich expertise in this domain, we have been capable of manufacturing, exporting and supplying of a quality assured range ofx ray machine tilting table. Our offered table is widely used for holding the x ray machine. This table is precisely manufactured by our dexterous professionals using the finest quality raw material and innovative technology in compliance with international standards. Owing to its compa

    Sharp

    Faridabad | More...

  • Ttilting Table

    Aditron Lifting Cum Tilting Table for Light Heavy Duty Industrial Service and Maintenance works with Capacities from 200 kgs. to 10000 kgs. with Double Acting High Pressure Hydraulic Pump with Release Valve and Replaceable Oil Seals. Multi-Scissor Mechanism, Motorised Power Packs with Customised Controls for Manual, Semi Automatic or Fully Automatic Operations made to Order - Applications.

    Aditron India Pvt. Ltd.q

    Delhi | More...

  • Tilting Table

    Features : Special design for angle setting on various machine tools. Low profile for larger working space. The table is set manually to the required Tilt and is locked in the set position by means of two locking clamps held through bolts. Can be adjusted by 45 degree on both right-hand and left- hand side. The angle marking are accurate and easy to read. Application : Useful accessory for setting work at an angle fo

    Arete Industries

    Punjab | More...

  • Tilting Table

    This Sturdy Built Tilting Table Has Machined T-Slots & Table Can Be Set At Any Angle

    Jagdambay Tools Worldwide

    Jalandhar | More...

  • Post your Buy Requirement

  • Hydraulic Core Tilting Table

    Vikrant manufacturers core assembly platform for assembly of 35 limbed core for distribution & power transformers with bottom and top yoke. Centre distance and length of the limbs are adjustable as per customers requirement. The assembly can be done without the top yoke also as per user's practice. The core table is made vertical by means of 24 hydraulic cylinders on capacity of the platform.

  • Tilting Table

    Features: PneumaticHydraulic Clamping Pre-Loaded Axial Radial Roller Bearing Dual Lead Worm Gear set

    Ucam Pvt. Ltd.

    Bangalore | More...

  • Tilting Table

    Tilting Table - Overview Tilting Table is a useful accessory for setting work at an angle for milling or other operations. The table has machined T-slots along length and can swing up to 45° on either side. For setting purposes a degree scale, reading minimum one degree, is graduated on the end face of cylindrical base itself. This ensures better setting accuracy. The table is set manually to the required tilt and i

    Jash Metrology

    Indore | More...

  • Tilting Table

    special design for angle setting on various machine tools. * low profile for larger working space. * the table is set manually to the required tilt and is locked in the set position by means of two locking clamps held through bolts. * can be adjusted by 45 degree on both right-hand and left-hand side. * the angle marking are accurate and easy to read.  .

    Herman Exports

    Goraya | More...

  • Tilting Table

    Heavy duty cast iron construction Machined T -slots Indexed accurately Table surface accurately ground Setting is locked by two screws Graduated in degrees for setting purpose

  • Cnc Rotary Tilting Tables

    ERT series of Rotary Tilting Tables enables accurate and productive machining. These tables are designed so that the surface of the table top is on the center line of the tilting axis, for a greater piece part capacity, easier programming and less interference in the work zone.

  • Nc Tilting Rotary Table

    Pneumatic Clamping system, with built-in patented disk-clamping design (Taiwan PAT.: 217736) to ensure cutting endurance. The feature of wear resistant alloy Dual-Lead Worm Gear is high mechanical efficiency of power transmission, high indexing accuracy and easy adjusted on the backlash. Able to be connected with CNC machine to perform synchronous 5th axis multi-angle machining. Able to be connected with CNC machine

    Dynamic Systems

    Bangalore | More...

  • Front Bar

      Tilting table with payload of up to 25t. Specific for MINIDREL S and B series. Optional installation of pushers.

    Gemini Power Hydraulics Pvt. Ltd.

    Maharashtra | More...

  • Tilting Tables

    We offer tilting tables. tilting table is a useful accessory for setting work at an angle for milling or other operations. The table has machined t-slots along length and can swing up to 45° on either side. For setting purposes a degree scale, reading minimum one degree, is graduated on the end face of cylindrical base itself. This ensures better setting accuracy. The table is set manually to the required tilt and i

    Jash Precision Tools Ltd.

    Indore | More...

Related Products

Library Furniture | Bedside Lockers | Bedside Screens | Electric Hospital Bed

Post your Buy Requirement


Is this page helpful?