Product Description Tube crimping and sealing machine Hand operated, sliding movement with hardened jaws, release of jaws with spring action. Robust construction....
No tube - No Fill Device : Activate Sensor with Electrical Logic Control system.
All Pneumatic components : FESTO Make.
Output per Minute : Up to 35 Tubes/ Min. In Single Hopper One Nozzle (depending on the Fill sizes).
M/c. Weight Approx : Overall Wt. Approx. 500 Kgs.
Filling Accuracy : ± 1%.
Machine System Description : Empty Tube Feeding, ‘I’ Mark Orientation, Filling, Sealing, Crimping, Coding and filled Tube Ejector Automatically.
Tube Orientation Device : Top Drive (Photocell Unit) Make Std. and Stepper Motor & ‘I’ Mark Sensor DETALOGIC Make. At the separate station.
Lami / Plastic Tube Sealing Device : Pneumatics operated. Jacketed water cooling System Attached, In sealing & coding where in the tube is pressed & sealed and then batch coded. With metal stereos coding Letter punch (female type 0 to 9, one set). At the separate station.
Filling capacity : Machine is suitable for 5 gms to 200 gms with inter changeable Piston pump.
\r\n Product, To Fill & Seal:\r\n : \r\n Creams, Pastes, Ointments, Gums, Balms, Honey, Pastes etc\r\n
\r\n Fabricated in Machine Entire frame Mild Steel With Powder Coated & will be in hard Chrome plated & duly ENP coated and all other cams and levers will be in graded casting & alloy steel. With all side covers in S.S.-304.\r\n : \r\n Power Input:\r\n
\r\n LEISTER or BAK Swiss Make, with suitable for Blower 0.35 HP. BLOWTECH Make. And hot air tool adopter jacketed water cooling system Attached, at the separate station. At the separate station.\r\n : \r\n Lami / Plastic Tube Sealing Device:\r\n
\r\n Filling device:\r\n : \r\n Positive suction & displacement  PISTON type\r\n After each filling stroke a control on tailing is achieved by a pneumatic cut-off system, along with filters, that cleans the nozzle of the excess sample.\r\n
Syringe Pump Insert for Filling:
:
(5 Gms. to 30 Gms.) or (30 Gms.to 100 Gms.) or (100 Gms. to 250 Gms.) Any one of the three sets will be provided against requested specification in your order.
Model:
:
 ROTAFIL-M35 -  STD MODEL
Product, To Fill & Seal:
:
Ointment into the Aluminum Tube
Â
Filling device:
:
Positive suction & displacement complete SS-316. After each filling session a control on tailing is achieved by a pneumatic cut-off system, along with filters, that cleans the nozzle of the excess sample.
Machine:
:
Semi Automatic Rotary Medium  Speed 12 Stations Single Head,
(Single Hopper Single Nozzle)Aluminum Tube Filling, Machine.
This machine is suitable for co-extruded plastic tubes & for Lami tubes.Can seal a tube with 50 mm diameter.Uniform & leak proof welding joint.Ultrasonic test.Automatic controller....
Features : Adjustable sealing height according to your tube. Greater performance with best quality tube sealing machine. Easy change over from one tube size to another. Electronic sealing timer for easy operation
Pneumatic Tube Sealing Machine that works in pneumatic power. Moreover, our range of machine has flexible design, which is appropriate for medium production of sealed tubes, up to 7000tubes per day. Moreover, our range of machines comes with a separate trimming station, which is...
PK 30 PL Combo is a fixed speed tube filling and sealing machine suitable for outputs of 45 tubes per minute. It is designed for filling and sealing, Plastic, Plastic laminate and Aluminum laminate tubes of up to 50mm diameter and with a maximum filling volume of 250 ml. The...
PK 60 / AL / PL / Combo Linear is very effective filler providing many features as standard. The design of the machine is ergonomic and easy to handle and maintain for operators. Is a fully plc controlled machine . The filler is very flexible, and...
PK 30 AL - SH and 30 AL - DH is very cost effective Filler providing many features as standard. The design of the machine is ergonomic, easy to handle and easy to maintain for operators. It is a Fixed Speed Tube Filling and Sealing machine. It is...