Our Products #1095202

APPLICATIONS: Vent silencers are used in areas where it is necessary: To reduce work place noise levels to a desired occupational limit. To cut the intrusion of industrial noise into residential areas. Vent silencers are used to suppress the noise generated by safety relief valves, process vents, dumping gas to atmosphere during compressor or boiler set-up sequences, de-pressurizing lines for maintenance, ejector discharges and steam exhausts, and the blowdown of pipelines for cleaning purposes. CONSTRUCTIONAL DETAIL: Available Sizes: 15NB TO 100NB, ASA 150# Available in both MS and SS Body construction. Other flange ratings can be provided on request. Limiting Conditions: Max. Op. Pr. = 10 bar. Max Op. Temp. = 1800C Where the standard range does not meet your requirements, special tailor-made designs can be offered. Accessories: Common Header for Multi vent points, Flexible hose with Quick connection arrangement and Cone Strainer screen can be provided additional

In the process industry double window sight glass are used as an accessory in thepipeline or inlet or outlet of equipments to view the process fluid flow. Traditionaldouble window sight glasses have the glass fitted between two flanges. Due to theinherent principle of tightening of flanges (opposite bolts are tightened one after theother), the glass by default remains stressed by unbalanced tightening torque from thefitting stage itself. This results into breakage during fitting or reduced life due tothermal expansion on an already stressed glass.Also in the traditional way of holding the glass, both the soft gaskets on both sides ofthe glass remains exposed to atmosphere resulting into the process fluid leaking out toatmosphere on the instant of the inside gasket failure. Capnut housing provided in the Indoanushka make MULTIVIEW for housing theglass enables a leak proof tightened housing without unevenly stressing the glassas the tightening is obtained by threading on the cap onto the nut and thereforethe glass gets uniformly and gradually tightened resulting into negligible or nopre-stresses.In this kind of a capnut housing arrangement, the inside gasket for the glass softseating has no scope of getting exposed to atmosphere. In fact it results into thewasher being placed inside a mould. Therefore even in situations of the gasketdisintegrating it casts itself inside the housing thereby it results into a lifelongleak free situation.MULTIVIEW double window sight glasses are provided with clear view (visiblediameter of the glass) of equal to or more than the size of the double windowsight glass. In fact if required a clear view of one or two sizes higher that the sizeof the double window sight glass can be provided, therefore enabling the user tohave as much a large view he requires.

In the process industry double window sight glass are used as an accessory in thepipeline or inlet or outlet of equipments to view the process fluid flow. Traditionaldouble window sight glasses have the glass fitted between two flanges. Due to theinherent principle of tightening of flanges (opposite bolts are tightened one after theother), the glass by default remains stressed by unbalanced tightening torque from thefitting stage itself. This results into breakage during fitting or reduced life due tothermal expansion on an already stressed glass.Also in the traditional way of holding the glass, both the soft gaskets on both sides ofthe glass remains exposed to atmosphere resulting into the process fluid leaking out toatmosphere on the instant of the inside gasket failure. The capnut housing provided in the indoanushka make multiview for housing theglass enables a leak proof tightened housing without unevenly stressing the glassas the tightening is obtained by threading on the cap onto the nut and thereforethe glass gets uniformly and gradually tightened resulting into negligible or nopre-stresses.in this kind of a capnut housing arrangement, the inside gasket for the glass softseating has no scope of getting exposed to atmosphere. In fact it results into thewasher being placed inside a mould. Therefore even in situations of the gasketdisintegrating it casts itself inside the housing thereby it results into a lifelongleak free situation.multiview double window sight glasses are provided with clear view (visiblediameter of the glass) of equal to or more than the size of the double windowsight glass. In fact if required a clear view of one or two sizes higher that the sizeof the double window sight glass can be provided, therefore enabling the user tohave as much a large view he requires.

Traditionally a sparge pipe is used whenever steam is required to be directly purged into a process fluid for heating. This process fluid may be water for hot water generation or any other chemicals, dyes, etc. This gives rise to two kinds of challenges. 1. High noise due to vibration as steam comes out from a number of small holes and at a high velocity. 2. As steam comes out at high velocities, a sizable percentage of this steam actually escapes and gets wasted without condensing and mixing with the process fluid. THERMOJECT - The Indoanushka make steam injector is an apt substitute for such sparge pipes. The THERMOJECT is a venturi type nozzle provided inside a concentric cylindrical housing with elliptical slots in the low pressure zone. When steam flows out at a high velocity through his convergent divergent nozzle, a differential pressure is created in the low pressure zone above the nozzle due to displacement of fluid by the steam velocity. As a result fresh cold process fluid is sucked in through the pre-designed slots and this gets mixed with the steam inside the mixing chamber provided in the injector housing. As a result what flows out of the injector is hot fluid and there is no scope of steam escaping without condensing. Also as the injector remains dipped inside the water, the water body itself acts as a silencer by hindering the flow of the high velocity steam coming out of the nozzle. This results into negligible or no sound during the mixing process. THERMOJECT helps in reducing steam consumption in such applications by 100% utilization of steam and 0 loss due to escaping of uncondensed steam

Applications: MAX-FLASH, flash vessels are used for separation of flash steam from high pressure condensate thereby generating useful low pressure steam totally free of cost. IndoAnushka make MAX-FLASH is supplied with all standard accessories like safety valve, pressure gauge, Valve, double window sight glass, steam trap and strainer.

Limiting conditions: Maximum Working Pressure: 10.5 kg/cm2 Maximum Working Temperature: 180 o C. Installation: IndoAnushka make MAX-FLASH come totally assembled and mounted on a skid for a fit it and forget it installation. Material of Construction: Vessels are of M.S. construction mounted on a M.S. skid.

Features. Compact skid mounted system including tank, thermoject-steam injectors, all required inlet/outlet circulating nozzles and automated with complete steam control instrumentation. Steam is injected using thermoject-steam injectors thereby ensuring zero steam losses, 100% energy utilisation and high energy efficiency due to utilisation of total heat of steam. Temperature based PID controlled steam control valve ensures instantaneous and continous hot water generation and supply with accurate required temperatures. Easy to install as system is supplied completely preassembled and skid mounted. System custom desi

Indirect Heating As the name indicates, in this type of heating, the steam does not come in direct contact with the water to be heated. This type of heating prevents contamination of the water due to steam mixing as in case of direct heating and is used widely in industries where process does not permit such contamination. It is widely used in industry because it provides rapid, even heating. This method uses a heat exchanger, either PHE or shell & tube type, to heat the water

Features. Package consists of heat exchanger, interconnecting piping, control instrumentation, pumping traps & required valves and buffer tank. Total system is skid mounted and compact thereby requiring significantly lesser space than traditional tank based hot water systems. Buffer tank provided enables the system to be used online in recirculating type hot water circuits. Efficiently designed heat exchangers and temperature based control instrumentation including control valves enable the availability of hot water instantenously, continuously and at accurate temperatures as required. Temperature based PID control enables variable temperature settings and stability of settings at variable loads. For non critical applications, economic versions with on/off control valves & thermodynamic steam trap at condensate outlet can also be provided.

MWHS can be provided with both plate heat exchangers or shell & tube type heat exchangers based on customer preference. Package includes pumping trap provided at the condensate outlet of the heat exchanger thereby ensuring zero damage to the heat exchanger under stalling conditions and long working life of the heat exchangers. MWHS is a High energy efficient solution for hot water generation. 100% energy utilisation takes place as system is provided complete with steam operated condensate return pump. A consolidated experience of more than 30 years in the field of heat transfer technology provides you the MWHS- the modular hot water heating systems.