Indra Technologies

Goregaon East, Mumbai, Maharashtra

IG-6 Night Glow Paint

IG-6 Night Glow Paint is a next-generation photoluminescent coating developed using advanced IG-6 technology to deliver long-lasting glow visibility for safety, industrial, and decorative applications. Unlike conventional reflective paints, which depend on direct light reflection, IG-6 Night Glow Paint absorbs natural daylight or artificial light and automatically glows in darkness for 10–12 hours, ensuring visibility even during complete blackout conditions.

This makes it a reliable and cost-effective substitute for electrical lighting systems, emergency lamps, and reflective coatings—offering both safety and energy savings.

Key Features & Benefits

• High-Performance Glow: Bright luminescence visible from long distances.

• Headlight / Power-Independent: Works even during total power failure.

• Durable & Long-Lasting: Resistant to rain, UV rays, dust, and chemical exposure.

• Eco-Friendly: Requires no electricity, batteries, or backup power.

• Multi-Surface Application: Can be applied on concrete, metal, wood, and plastics.

• Long Life Guarantee: Maintains glow performance for 5+ years with minimal upkeep.

Applications

• Road Safety: Lane markings, dividers, crash barriers, pedestrian crossings.

• Industrial Safety: Escape routes, staircases, fire exits, machinery markings.

• Tunnels & Mines: Guidance markings during blackouts or emergencies.

• Aviation & Marine: Helipad markings, offshore platforms, ship decks.

• Public Spaces: Metro stations, parking zones, bridges, malls.

• Decorative Uses: Signboards, garden pathways, artistic designs.

Cost-Effectiveness

Installing streetlights, emergency lamps, or backup generators involves huge capital, energy, and maintenance costs. In comparison, IG-6 Night Glow Paint provides one-time installation with zero recurring expense, making it one of the most economical long-term safety solutions.

Case Study: Metro Station Evacuation Markings

In 2024, a metro station in Delhi implemented IG-6 Night Glow Paint on staircases, exit signs, and platform edges as a pilot safety project.

• Observation: During a simulated power failure, commuters were able to evacuate safely using glowing markings without any electrical backup.

• Impact: Authorities recorded a 70% improvement in evacuation time, demonstrating how photoluminescent coatings enhance passenger safety.

• Savings: The project avoided recurring energy and maintenance costs linked to emergency lamps.

This project proved that IG-6 Night Glow Paint is more than just a coating—it is a life-saving innovation that enhances safety while cutting costs.

Radium Paint for Lane Marking – Power, Chemical & Textile Plants

Radium Paint is a photoluminescent safety coating used for lane marking in power plants, chemical plants, textile units, and other industrial facilities. During emergencies like fire, flooding, or earthquake, when power failure causes blackout, the glowing lanes guide safe evacuation.

Special Feature

• Appears white in daylight

• Glows green/blue in darkness

• Charges under tube light in 3–4 hrs

• Glows for 5–6 hrs in complete darkness

Principle of Operation

• Pigments absorb surrounding light and get charged

• In darkness, they emit visible radium green glow

Application Method

• Mix resin & hardener in 3:1 ratio

• Apply by spray painting within 1 hour

• Basecoat of white polyurethane recommended for best results

Packing

• 1 liter, two-pack system

• 750 ml Resin + 250 ml Hardener

Coverage

• 70 sq. ft. per liter

Optical Data

• Shade: White in light, Green/Blue in dark

• Brightness:
  • 4500 mcd/m² @ 1 min
  • 450 mcd/m² @ 10 min
  • 27 mcd/m² @ 8 hrs

• Visibility limit: 0.32 mcd/m² (naked human eye)

• Glow Duration: Up to 6 hrs after 3 hrs exposure

Guarantee

• Night glow properties remain unchanged lifelong (unless physically damaged)

Paint Medium Specifications

• Type: Polyurethane resin-based

• System: Two-pack (base + hardener, mixed before use)

• Features: High gloss, UV resistant, non-yellowing, excellent flow

• Finish: Smooth, glossy

• Viscosity (base): 18–22 sec (Flow Cup No. 4 at 30°C)

• Drying: Surface dry 20 min Hard dry overnight Full cure 7 days

• Flash Point: Above 23°C

• Application: Spray at 25–30 sec viscosity (stir during application)

• Thinner: PU thinner

• Mixing Ratio: Resin:Hardener (3:1 by volume)

• Pot Life: 1 hour Maturation: 20–30 min

• Stoving: 120°C (15 min) or 60°C (40 min) after 20 min flash-off

• Adhesion: Excellent on polyurethane topcoats

• Flexibility: Passes ¼” mandrel

Chemical Resistance

• 30% HSO (24 hrs): Not affected

• 30% NaOH (30 hrs): Not affected

• Petrol/Diesel (30 min): Not affected

• Water (24 hrs): Not affected

• Shelf Life: Several months (sealed, ambient conditions)

Coverage

• 70 sq. ft. per liter

Service Areas

 

• India: Mumbai, Maharashtra & all over India

• International: Saudi Arabia, Dubai, Kuwait, Abu Dhabi, Middle East & Gulf

Streetlight Radium Paint – Night Glow Safety Coating for Roads

Streetlight Radium Paint is a next-generation photoluminescent coating designed for highways, expressways, and accident-prone areas. Unlike traditional reflective paints that rely on headlights, this paint absorbs sunlight or ambient light and glows naturally in the dark, visible from up to 1 km away. It provides drivers with early warnings, reducing accidents and improving road safety.

Key Applications

• Crash barriers (primary safety structures)

• Road dividers, flower beds, and curb stones

• Quarter stones and kilometer stones

• Sharp curves, underpasses, hills, and poorly lit stretches

• City roads, rural roads, parking lots, housing societies, institutional campuses

Benefits

Visibility up to 1 km in darkness
Continuous glow for safe night driving
Works without headlights – unlike reflective paints
Prevents lane-crossing and run-off-road accidents
Cost-effective: 5 lakh/km vs. 100 lakh/km for streetlights
Zero electricity, zero maintenance, eco-friendly
Durable, weather-resistant, 5-year life
Reduces carbon footprint compared to electric lighting

Cost Advantage

• Streetlights: 100 lakh/km + maintenance + electricity

• Radium Paint: 5 lakh/km, no operating cost, long-lasting performance

Technical Highlights

• Glow Duration: Visible up to 1 km in darkness

• Glow Source: Absorbs sunlight or ambient light

• Substrates: Concrete, metal, stone

• Properties: Weather-resistant, dust-proof, fog-proof, heat & rain stable

• Service Life: Up to 5 years

Use Case Example

On highways and rural roads without streetlights, crash barriers and dividers coated with Streetlight Radium Paint stay visible even in pitch darkness. Drivers approaching at high speed notice the glowing outline early, gaining enough time to brake safely. This reduces both minor collisions and fatal accidents.

Ideal For

 

• Highways & expressways

• Rural and village roads

• Industrial areas & parking lots

• Housing societies & institutional campuses

• Accident-prone zones with poor/no street lighting

IG-6 Night Glow Lane Marking Paint

IG-6 Night Glow Lane Marking Paint is a premium-grade photoluminescent coating designed to improve road safety during nighttime and low-visibility conditions. Engineered with advanced IG-6 luminescent technology, this paint absorbs natural sunlight or artificial light during the day and glows automatically at night, ensuring bright and clear visibility of road lanes for up to 10–12 hours.

Most road accidents occur at night due to poor lane visibility and over-dependence on headlights. Unlike ordinary reflective paints, which require direct light to reflect, IG-6 Night Glow Lane Marking Paint continues to shine even in complete blackout conditions—making it a life-saving alternative to traditional streetlights and reflective coatings.

Key Features & Benefits

• High-Intensity Glow: Visible from distances up to 1 kilometer in darkness.

• Headlight-Independent Safety: Works even if vehicle headlights fail.

• Cost-Effective Substitute to Streetlights: Eliminates heavy streetlight installation, energy, and maintenance costs.

• Durable & Long-Lasting: Withstands rain, dust, UV exposure, and heavy traffic load.

• Eco-Friendly: No electricity, batteries, or generators required.

• Long Service Life: Guaranteed glow performance for 5+ years without re-application.

Applications

• National highways and expressways

• City roads and rural lanes without streetlights

• Pedestrian crossings and zebra markings

• Curves, blind turns, and accident-prone zones

• Parking areas, toll plazas, and flyovers

Cost-Effectiveness

Conventional streetlight installation costs are extremely high—millions per kilometer in infrastructure, energy, and maintenance. In comparison, IG-6 Night Glow Lane Marking Paint provides the same visibility benefits at just a fraction of the cost, with zero power consumption and no maintenance burden.

Case Study: Highway Section in Madhya Pradesh

In 2024, a 15 km highway stretch near Indore was prone to frequent accidents due to poor visibility and lack of adequate lighting. Authorities applied IG-6 Night Glow Lane Marking Paint across lane dividers and pedestrian crossings.

• Result: Night-time accidents reduced by over 50% within six months.

• Driver Feedback: Motorists reported that lanes were clearly visible even during headlight malfunctions and foggy nights.

• Savings: The project saved approximately 12 crores by avoiding additional streetlight installations and energy bills.

This case shows how IG-6 Night Glow Lane Marking Paint is not just a coating, but a transformative solution for safer and more sustainable road infrastructure.

IGT-49 Safelight Night Glow Paint

IGT-49 Safelight Night Glow Paint is a high-performance photoluminescent safety coating engineered with advanced IGT-49 formulation to provide long-lasting glow visibility in darkness and low-light conditions. This paint absorbs natural or artificial light and automatically emits a bright glow for 10–12 hours, ensuring continuous visibility even in blackout situations.

Unlike ordinary reflective paints that rely solely on headlights or external illumination, IGT-49 Safelight Paint works independently, making it a life-saving solution for emergency routes, industrial safety, and public infrastructure.

Key Features & Benefits

• High Glow Intensity: Provides clear visibility from long distances in total darkness.

• Energy-Free Illumination: Works without electricity, batteries, or generators.

• Reliable Safety Tool: Critical for evacuation during fire, earthquake, power failure, or accidents.

• Durable & Long-Lasting: Withstands weather, UV exposure, and heavy usage.

• Eco-Friendly: No emissions, no energy costs, and minimal maintenance.

• Multi-Surface Application: Suitable for concrete, metal, wood, plastics, and composites.

• Service Life Guarantee: Maintains glow performance for 5+ years.

Applications

• Emergency Safety: Exit routes, staircases, fire exit signs, evacuation pathways.

• Road & Transport: Lane markings, zebra crossings, crash barriers, pedestrian zones.

• Industrial Use: Factories, warehouses, and hazardous zones requiring safety signage.

• Public Infrastructure: Metro stations, airports, tunnels, parking lots, subways.

• Disaster Preparedness: Safe navigation during natural disasters like earthquakes, floods, or cyclones.

• Specialized Areas: Hospitals, schools, high-rise buildings, and defense establishments.

Cost-Effectiveness

Installing emergency lights, reflective signage, or backup power systems involves high costs of installation, electricity, and maintenance. In comparison, IGT-49 Safelight Night Glow Paint offers a one-time economical solution, ensuring long-term safety visibility with zero energy expense.

Case Study: Metro Station Safety Upgrade – Mumbai

In 2024, a busy metro station in Mumbai faced challenges during power outages, creating panic among commuters. Authorities applied IGT-49 Safelight Night Glow Paint on staircases, wall edges, and exit routes.

• Observation: During a simulated blackout, evacuation was smooth as all routes remained clearly visible for over 10 hours.

• Impact: Passenger safety improved, and evacuation time was reduced by 65%.

• Cost Savings: Avoided large recurring electricity bills for emergency lighting.

• Feedback: Both commuters and safety officials praised the paint as a critical safety enhancement.

This real-life project demonstrated that IGT-49 Safelight Night Glow Paint is not just a coating, but a vital safety solution for modern infrastructure.

Streetlight Radium Paint for Road

Streetlight Radium Paint is a life-saving innovation for road safety, designed to provide continuous visibility on highways, city roads, village streets, and accident-prone zones. Most road accidents occur during the night due to poor visibility and reliance only on headlights. In such conditions, Streetlight Radium Paint acts as a highly effective alternative to conventional streetlights, glowing brightly in the dark and ensuring safe navigation for drivers, pedestrians, and cyclists.

Unlike traditional reflective paints which depend on headlights, this photoluminescent paint absorbs natural or artificial light during the day and automatically glows at night, making road markings clearly visible even if headlights fail. The visibility range of Streetlight Radium Paint can extend up to a kilometer, far surpassing standard titanium dioxide-based reflective coatings.

Key Features & Benefits:

• 24x7 Visibility: Stores light energy during the day and glows throughout the night.

• Headlight-Independent Safety: Visible even without functional headlights.

• Substitute to Streetlights: A cost-effective alternative to costly streetlight installation, power consumption, and maintenance.

• Durable & Weatherproof: Withstands heavy rains, dust, UV exposure, and high traffic load.

• Long Life Guarantee: Effective glow performance for over 5 years with zero recurring cost.

• Eco-Friendly Solution: No electricity, batteries, or generators required.

Applications:

• Highway lane markings and dividers

• Rural and village roads where streetlights are absent

• Pedestrian crossings and zebra lines

• Accident-prone sharp turns and blind curves

• Parking lots, toll plazas, and bridge markings

Cost-Effectiveness:

Installing conventional streetlights can cost millions per kilometer in setup, electricity, and maintenance. In contrast, Streetlight Radium Paint costs only a fraction of that amount, requires no energy, and delivers guaranteed performance.

Case Study: Rural Highway in Maharashtra

In 2024, a pilot project was conducted on a 12-kilometer stretch of rural highway in Maharashtra, where frequent accidents occurred due to poor night-time visibility and the absence of streetlights. The local administration decided to replace ordinary reflective lane markings with Streetlight Radium Paint.

• Implementation: Radium paint was applied on lane dividers, zebra crossings, and sharp curves.

• Observation: Within the first six months, the number of night-time accidents reduced by over 60%. Drivers reported that road lanes were clearly visible even on nights with poor lighting conditions or when vehicle headlights malfunctioned.

• Cost Savings: The project saved nearly 8 crores in potential streetlight installation and energy costs, while ensuring zero recurring expenditure.

• Feedback: Transport authorities and local commuters praised the solution as both economical and life-saving.

This case demonstrates how Streetlight Radium Paint not only reduces accidents but also serves as a cost-effective substitute for expensive streetlight infrastructure, especially in semi-urban and rural areas.