Indra Technologies

Goregaon East, Mumbai, Maharashtra

Radium Helipad Marking Paint is a high-performance photoluminescent coating developed to ensure maximum visibility and safety for helipad operations during nighttime and low-light conditions. Unlike ordinary reflective paints that depend solely on external light sources, this advanced radium-based paint absorbs natural daylight or artificial light and glows brightly in the dark, ensuring clear visibility of helipad markings even during power failures or emergencies.

Helipad markings are critical for safe aircraft landing and take-off. Conventional paints often fade quickly or fail to provide visibility in blackout situations, posing a serious risk. Radium Helipad Marking Paint provides consistent, long-lasting glow visibility for over 10–12 hours, making it an essential safety solution for both civilian and defense aviation facilities.

• High Glow Intensity: Clear visibility of helipad markings up to 1 km away at night.

• Power-Free Illumination: Works without electricity, batteries, or backup lights.

• Safety Assurance: Enhances pilot orientation and landing accuracy during poor visibility.

• Durable & Weatherproof: Resistant to UV rays, rain, dust, jet blast, and heavy foot traffic.

• Long Life Guarantee: Provides more than 5 years of glow performance with no recurring cost.

• Eco-Friendly & Cost-Effective: Zero energy consumption and minimal maintenance.

• Hospital emergency helipads

• Commercial and private helipads

• Military and defense helipads in remote zones

• Offshore helipads on oil rigs and ships

• Temporary disaster relief landing zones

Installing permanent lighting systems for helipads requires high capital investment, energy consumption, and maintenance. In comparison, Radium Helipad Marking Paint offers a one-time economical solution, guaranteeing night visibility and reducing dependency on complex lighting infrastructure.

In 2023, a hospital in Rajasthan upgraded its rooftop helipad with Radium Helipad Marking Paint to ensure safe emergency landings during power outages.

• Implementation: The "H" symbol, landing circle, and boundary markings were coated with radium paint.

• Results: During a sudden power failure, the helipad remained visible for over 10 continuous hours, enabling a safe night landing of an emergency air ambulance.

• Feedback: Hospital authorities and pilots reported higher confidence in night operations and reduced dependency on costly lighting backup systems.

This real-life example proves that Radium Helipad Marking Paint is not just a coating, but a vital life-saving innovation for aviation safety.

Radium Paint for Crash Barriers is an advanced photoluminescent coating developed to enhance road safety by ensuring high visibility of roadside crash barriers during night and low-light conditions. Most road accidents occur at night due to poor visibility of barriers at curves, flyovers, and highways. Traditional reflective paints are only visible when vehicle headlights directly fall on them. In contrast, our radium paint absorbs natural sunlight or artificial light during the day and glows brightly in the dark, offering round-the-clock visibility.

Crash barriers are critical safety devices designed to reduce impact severity during accidents, but if they are not visible, their effectiveness is compromised. Radium Paint provides clear night visibility of barriers from a distance of up to one kilometer, helping drivers identify road boundaries and obstructions well in advance. This makes driving safer even when headlights malfunction or visibility is poor due to fog, rain, or dust.

• High-Intensity Glow: Provides bright luminescence without electricity.

• Headlight-Independent: Visible even if headlights are dim or not working.

• Cost-Effective Alternative: Reduces dependency on reflective sheets and streetlights.

• Weather & Impact Resistant: Withstands harsh outdoor conditions and heavy traffic exposure.

• Long-Term Durability: Effective for 5+ years with no energy or maintenance cost.

• Eco-Friendly Solution: Requires no power, batteries, or generators.

• Crash barriers on highways and expressways

• Flyovers, bridges, and tunnels

• Accident-prone curves and sharp bends

• Mountain roads and rural highways

• Construction zones and temporary safety barriers

In 2023, a 7 km stretch of NH-48 near Bharuch, Gujarat, faced repeated accidents due to low visibility of crash barriers on curves. Authorities applied Radium Paint for Crash Barriers across the section.

• Result: Accident frequency at night dropped by 45% within 4 months.

• Driver Feedback: Drivers reported that barriers were visible even in foggy and rainy nights, allowing more reaction time.

• Savings: The project saved costs compared to installing additional streetlights or reflective signage, with zero energy expenditure.

This project proved that Radium Paint is not just a coating but a life-saving technology, offering a sustainable and economical solution for road safety.

Safelight Radium Paint for Shopping Malls – Photoluminescent Safety Coating for Public Spaces Modern shopping malls are high-traffic public spaces where thousands of visitors, staff, and retailers gather daily. In such environments, safety, crowd management, and emergency preparedness are top priorities. Safelight Radium Paint — also known as Glow in Dark Paint, Night Glow Paint, Photoluminescent Paint, Luminous Paint, or Phosphorescent Paint — is an advanced, passive safety coating specifically designed to provide continuous visibility and safe evacuation guidance during emergencies, even when power fails. This innovative paint absorbs natural or artificial light during regular operation and automatically emits a bright glow in complete darkness, clearly marking escape routes, exits, stairways, and safety equipment locations without the need for electricity. For malls, where panic and chaos can escalate quickly during incidents, Safelight Radium Paint ensures orderly evacuation, reduced risk, and enhanced safety compliance. Key Benefits and Safety Advantages Reliable Emergency Visibility: In the event of a power failure, fire, earthquake, explosion, or flood, Safelight Radium Paint continues to glow for 10–12 hours, providing a visible and calm evacuation route even in total darkness. This reduces panic and confusion, helping shoppers and staff exit the premises safely. Life-Saving Safety Tool: By illuminating staircases, corridors, exit doors, elevators, and assembly points, Photoluminescent Paint acts as a silent, maintenance-free emergency guide, directing people to safety when visibility is most critical. Cost-Effective Alternative to Emergency Systems: Traditional emergency lighting systems, backup power generators, and safety lamps require heavy investment, regular maintenance, and power consumption. Safelight Radium Paint is a one-time application, requiring no electricity, no maintenance, and no operational cost for over 5 years, making it a highly economical substitute. Insurance Premium Reduction: Many insurance companies consider malls with enhanced passive safety infrastructure — such as Luminous Paint and Phosphorescent Paint safety markings — as lower risk. This can lead to significant reductions in annual insurance premiums, lowering long-term operational costs. Compliance with Safety Standards: Photoluminescent safety markings help malls meet stringent fire safety codes, building regulations, and disaster management requirements, improving audit scores and public trust. Applications in Shopping Malls Emergency exits, stairways, and corridors Firefighting equipment areas (extinguishers, alarms, hydrants) Lift and escalator areas Parking zones, basement pathways, and loading docks Food courts, cinema exits, and atrium walkways Assembly points and emergency signage Case Study: Safe Evacuation During a Power Failure A premium shopping mall in Bengaluru with over 50, 000 daily visitors applied Safelight Photoluminescent Paint throughout its emergency exit paths, staircases, basement parking, and service corridors. During a summer evening, a transformer failure led to a complete power outage lasting over 30 minutes. While emergency lighting systems failed to activate due to a battery fault, the Glow in Dark Paint illuminated all escape routes and safety markings. This allowed more than 3, 000 visitors to evacuate calmly within minutes, with zero injuries or accidents reported. The mall’s management credited the Photoluminescent Paint for preventing a potential disaster. Following the incident, the facility’s insurer offered a 15% reduction in annual insurance premium due to improved safety infrastructure. Why Choose Safelight Radium Paint for Malls? Self-charging and maintenance-free – no power required. Effective for 5+ years – long-term safety solution with one-time application. Non-toxic, eco-friendly, and compliant with public safety standards. Improves crowd safety

ChatGPT said: Safelight Radium Paint for Commercial Complexes – Advanced Photoluminescent Safety Solution for Modern Buildings In today’s urban landscape, commercial complexes such as office towers, IT parks, business centers, and mixed-use buildings are operational hubs where thousands of people work, visit, and commute daily. Ensuring their safety during emergencies is not just a legal requirement — it’s a responsibility. Safelight Radium Paint, also known as Glow in Dark Paint, Night Glow Paint, Photoluminescent Paint, Luminous Paint, or Phosphorescent Paint, is an innovative passive safety coating designed to provide continuous, self-illuminating visibility and guide occupants to safety during critical situations — even in total darkness. By absorbing natural or artificial light during normal operations, Safelight Radium Paint emits a bright, visible glow for 10–12 hours when lighting fails. This ensures safe evacuation and visibility during emergencies such as fire, earthquake, explosion, chemical leak, power outage, or flood, reducing panic and preventing injuries. Key Features and Safety Advantages Continuous Visibility in Blackouts: Even during complete power failures, Safelight Radium Paint glows brightly without electricity, clearly indicating exit routes, staircases, corridors, assembly points, and safety equipment locations. This ensures safe evacuation and prevents accidents in densely populated buildings. Life-Saving Safety Infrastructure: In emergencies where visibility is critical, such as during fires or explosions, Photoluminescent Paint acts as a reliable, maintenance-free guide that leads people to safety, significantly reducing evacuation time and confusion. Cost-Effective Alternative to Emergency Equipment: Installing and maintaining conventional emergency systems such as standby generators, emergency lights, or battery-powered lamps can be expensive and require regular upkeep. Safelight Radium Paint offers a one-time, maintenance-free solution that lasts over 5 years and requires no power, making it an economical substitute. Insurance Premium Savings: By enhancing passive safety infrastructure with Luminous Paint and Phosphorescent Paint, commercial buildings are often classified as lower risk by insurance providers, resulting in significant reductions in annual insurance premiums and long-term operational savings. Compliance and Safety Audit Support: Photoluminescent markings help commercial complexes meet fire safety codes, building regulations, and emergency preparedness standards, improving audit performance and enhancing building certifications. Applications in Commercial Buildings Emergency exits, staircases, and corridors Firefighting and safety equipment areas (extinguishers, hydrants, alarms) Lifts, escalators, and elevator lobbies Parking areas, basements, and service corridors Meeting rooms, lobbies, and assembly points Emergency signage and directional pathways Case Study: Photoluminescent Safety Saves Lives During a Fire A multi-storey commercial tower in Mumbai housing over 2, 000 employees installed Safelight Photoluminescent Paint on all emergency pathways, staircases, exit doors, and basement parking areas. A few months later, an electrical fire caused a complete power shutdown across the building, disabling conventional lighting and backup systems. Despite the blackout, the Glow in Dark Paint illuminated escape routes and safety points for more than 10 hours, enabling all occupants to evacuate safely and in an orderly manner within minutes. The incident resulted in zero casualties and minimal property damage. The building’s insurer later provided a 14% reduction in annual premium, citing improved passive safety measures and reduced risk exposure. Why Choose Safelight Radium Paint for Commercial Complexes? Self-charging and maintenance-free – no external power required. Long-lasting performance – glows effectively for 5+ years after a sin

ChatGPT said: Safelight Radium Paint for Electronics Manufacturing Plants – Photoluminescent Safety Coating for High-Tech Environments In electronics manufacturing facilities, where precision, sensitive equipment, and uninterrupted processes are essential, even a brief power outage or emergency can cause severe safety risks, production downtime, and financial losses. Safelight Radium Paint, also known as Glow in Dark Paint, Night Glow Paint, Photoluminescent Paint, Luminous Paint, or Phosphorescent Paint, is a revolutionary passive safety coating designed to ensure continuous visibility, safe evacuation, and enhanced emergency preparedness — without relying on electricity. By absorbing ambient light (natural or artificial) during normal operations, Safelight Radium Paint automatically emits a bright, long-lasting glow for 10–12 hours in darkness. This provides a clear, visible pathway for workers and technicians during emergencies such as fire, explosion, earthquake, chemical leaks, floods, or sudden power failures, helping avoid accidents and ensuring a safe, organized evacuation. Key Safety Advantages and Benefits Uninterrupted Emergency Guidance: Even during total power loss, Safelight Radium Paint glows brightly, guiding personnel toward exit doors, staircases, emergency assembly points, and safety equipment — ensuring rapid, panic-free evacuation. Critical for Sensitive Environments: Electronics plants house static-sensitive components, hazardous chemicals, and high-value machinery. In such environments, conventional lighting systems may fail or cause additional hazards during emergencies. Photoluminescent Paint provides maintenance-free, reliable illumination without any electrical risk. Cost-Effective Safety Investment: Traditional systems like standby generators, emergency lamps, and battery-powered exit lights involve heavy installation costs, periodic maintenance, and ongoing power expenses. Safelight Radium Paint, on the other hand, is a one-time, low-cost solution that remains effective for over 5 years, requiring no electricity and zero maintenance. Insurance Premium Reduction: Many insurance companies classify facilities with enhanced passive safety measures — like Luminous Paint and Phosphorescent Paint — as lower risk. Electronics manufacturers using these systems often receive significant discounts on insurance premiums, leading to substantial long-term savings. Regulatory Compliance and Safety Audits: The use of photoluminescent safety markings improves compliance with fire safety codes, occupational safety guidelines, and EHS (Environment, Health & Safety) standards, strengthening audit performance and certification readiness. Applications in Electronics Manufacturing Plants Emergency exits, staircases, and evacuation routes Firefighting and safety equipment zones (extinguishers, alarms, hydrants) Hazardous chemical storage areas and cleanrooms Control panels, power distribution areas, and assembly points Corridors, floor demarcations, and restricted zones Basement pathways and service tunnels Case Study: Safe Evacuation During a Power Failure A leading electronics assembly plant in Noida, employing over 1, 200 people, installed Safelight Photoluminescent Paint across its emergency routes, staircases, cleanroom exits, and critical equipment areas. A few months later, a short-circuit caused a complete power outage during the evening shift, disabling lighting and halting operations. Despite the blackout, Glow in Dark Paint illuminated all exit pathways, enabling the entire workforce to evacuate safely within minutes with zero injuries or accidents. The company’s risk assessment report noted a 40% reduction in evacuation time, and the facility’s insurance provider later offered a 15% reduction in annual premiums, recognizing the improved safety infrastructure. Why Choose Safelight Radium Paint for Electronics Plants? Self-illuminating and maintenance-free – charge

Safelight Radium Paint for Mines – Photoluminescent Safety Solution for Underground and Hazardous Mining Environments Mining operations are among the most hazardous industrial activities, where darkness, confined spaces, and emergency situations pose constant risks to human life. Ensuring clear visibility and safe evacuation routes is not just a safety requirement — it is a life-saving necessity. Safelight Radium Paint, also known as Glow in Dark Paint, Night Glow Paint, Photoluminescent Paint, Luminous Paint, or Phosphorescent Paint, is an advanced passive safety coating designed specifically for underground mines, open-cast mines, and tunneling operations to provide bright, self-illuminating guidance even in total darkness. This innovative paint absorbs natural or artificial light and automatically emits a high-intensity glow for 10–12 hours, ensuring workers can navigate, evacuate, and locate safety equipment even in the most challenging conditions — without any electricity, batteries, or maintenance. Key Safety Advantages in Mining Environments Life-Saving Visibility in Darkness: Underground mines are prone to blackouts, cave-ins, explosions, or power failures, which can leave workers stranded in pitch darkness. Safelight Radium Paint glows brightly to mark escape routes, exit paths, ladders, and refuge chambers, guiding miners safely to the surface. Essential During Emergencies: In events like mine fires, gas leaks, rock bursts, explosions, or flooding, visibility can drop to zero. Photoluminescent Paint ensures that workers can still identify emergency exits, safety zones, first-aid points, and rescue equipment even when lighting systems fail. Cost-Effective Alternative to Traditional Safety Equipment: Traditional emergency systems like standby generators, emergency lamps, and powered safety signage require regular maintenance, high energy costs, and are prone to failure in rugged conditions. Safelight Radium Paint is a one-time investment that requires no electricity, zero maintenance, and remains functional for 5+ years, making it a highly economic substitute. Reduced Insurance Premiums: Mines equipped with Luminous Paint and Phosphorescent Paint are often classified as low-risk environments by insurers. As a result, mine operators can significantly reduce insurance premiums, achieving substantial cost savings over the long term. Compliance with Safety Regulations: Photoluminescent safety markings help meet DGMS (Directorate General of Mines Safety) standards, fire safety codes, and occupational safety regulations, strengthening audit performance and regulatory compliance. Applications of Safelight Radium Paint in Mining Escape tunnels, exit routes, and haulage roads Staircases, ladders, and shaft access points Firefighting and safety equipment zones (extinguishers, hydrants, breathing apparatus) Refuge chambers and emergency shelters Hazardous areas and restricted entry zones Conveyor belts, loading points, and control panels Case Study: Life-Saving Evacuation in a Coal Mine A large underground coal mine in Jharkhand installed Safelight Photoluminescent Paint along its primary escape tunnels, refuge chambers, and safety equipment locations as part of a safety upgrade. Three months later, a methane explosion caused a total power failure in the lower shafts, trapping over 120 workers in darkness. Despite the blackout, Glow in Dark Paint illuminated the escape routes and safety markers for more than 12 hours, allowing all miners to evacuate safely through designated tunnels without panic. The incident recorded zero casualties, and post-incident assessments highlighted a 35% reduction in evacuation time. The mining company later reported a 17% reduction in annual insurance premiums due to enhanced passive safety measures. Why Choose Safelight Radium Paint for Mining Operations? Self-charging and maintenance-free – no electricity required. Long-lasting performance – continues gl

ChatGPT said: Safelight Radium Paint for Nuclear Power Plants – Critical Photoluminescent Safety Solution for High-Risk Energy Facilities Nuclear power plants are the backbone of modern energy infrastructure, supplying clean and continuous power to millions of homes and industries. However, they also represent some of the most sensitive, high-risk environments on Earth, where even a brief loss of visibility during an emergency can lead to catastrophic consequences. Due to their reliance on abundant cooling water, most nuclear facilities are located near coastal regions, which makes them particularly vulnerable to natural disasters such as tsunamis, sea water flooding, storm surges, or earthquakes. Safelight Radium Paint, also known as Glow in Dark Paint, Night Glow Paint, Photoluminescent Paint, Luminous Paint, or Phosphorescent Paint, is a cutting-edge safety innovation designed to protect life and infrastructure during such critical events. It absorbs light during normal operations and emits a bright, long-lasting glow for 10–12 hours in total darkness — ensuring safe navigation, evacuation, and emergency operations even during the worst conditions, such as blackouts, structural damage, or flooding. Essential Safety Benefits for Nuclear Facilities Uninterrupted Visibility During Blackouts: In nuclear plants, power loss can halt critical cooling systems and monitoring equipment. Safelight Radium Paint ensures emergency exits, staircases, control room pathways, and radiation safety zones remain clearly visible even when every electrical system fails. Flood and Tsunami Resilience: Because many nuclear plants are located near the sea, they are at risk of flooding and water ingress during natural disasters. Even in submerged or partially flooded conditions, Photoluminescent Paint continues to glow underwater and in wet environments, guiding personnel safely toward exits, higher ground, or emergency stations. Crucial Support During Natural Disasters: During earthquakes, tsunamis, explosions, or coolant leaks, Luminous Paint provides continuous, non-electric illumination, reducing panic and enabling faster, safer decision-making in high-stress environments. Economic Alternative to Emergency Infrastructure: Traditional safety systems like emergency lamps, backup generators, and battery-powered lighting require significant investment and regular maintenance. Safelight Radium Paint is a low-cost, passive safety solution that requires no electricity, no batteries, and virtually no upkeep — operating effectively for over 5 years after a single application. Insurance and Compliance Benefits: Facilities equipped with Phosphorescent Paint are often rated as lower-risk by insurers, helping plant operators save significantly on annual insurance premiums while also improving safety audit scores and compliance with IAEA, NRC, and ISO safety standards. Strategic Applications in Nuclear Power Plants Evacuation pathways, staircases, and emergency exits Control rooms, turbine halls, and containment building interiors Radiation safety corridors and reactor floor boundaries Fuel handling, spent fuel storage, and cooling system areas Firefighting equipment points, safety signage, and muster zones Case Study: Fukushima Daiichi – A Lesson in Emergency Visibility The 2011 Fukushima Daiichi nuclear disaster in Japan highlighted the catastrophic risks of losing visibility during extreme events. Following a massive earthquake and tsunami, the plant suffered complete power loss, disabling lighting and emergency systems. Flooding further complicated evacuation and response efforts, as critical routes and safety signage disappeared into darkness. Had Safelight Photoluminescent Paint been installed, pathways, exit points, and safety stations would have remained clearly illuminated for more than 10 hours without electricity, significantly improving the evacuation process and potentially reducing the scale of the disaste

IGT-59 Luminescent Paint for Cosmetic Manufacturers

Specially engineered photoluminescent safety coating for cosmetic & personal care production facilities. Provides non-electric glow-in-the-dark guidance in production areas, cleanrooms, packaging units & storage zones. Effective substitute for Golden Yellow Lane Marking paint.

Key Features

• Photoluminescent – glows 10–12 hrs after light exposure (15–30 mins charge)

• Contains high-grade strontium aluminate pigments (non-toxic, non-radioactive)

• VOC-free, odorless, safe for GMP-regulated facilities

• Chemical & solvent resistant – compatible with cosmetic raw materials

• Works during blackouts, fire, or power failures – no electricity required

• Quick application – brush, roller, or spray

Applications in Cosmetic Facilities

• Exit door & evacuation route marking

• Emergency equipment: eyewash stations, fire extinguishers, hydrants

• Pathway & edge markings in filling/formulation rooms

• Stair edges, pallet zones & lifts

• Cleanroom zone demarcation

• HVAC duct & control panel borders

• QC labs & raw material storage areas

Core Benefits

• Maintains visibility in blackout/fire/power outage

• Safe for hygiene-sensitive areas (skincare, haircare, makeup, fragrance units)

• Zero power or battery backup needed

• Resistant to fuels, solvents & cleaning agents

• Fast drying & strong adhesion on epoxy, RCC, SS, aluminum, tiles

• Meets ISO, GMP & EHS protocols

Technical Overview

• Type: Dual-component epoxy resin + hardener

• Glow Duration: 10–12 hrs

• Thickness: 80–100 microns (2 coats)

• Colors: Yellow-Green (std.), Aqua Blue (opt.)

• Drying Time: 30–40 mins (surface dry); 8–10 hrs (full cure)

• Surface Compatibility: Epoxy floors, PU-coated walls, SS panels, tiles

• Shelf Life: 12 months (store cool, dry)

• Environmental Safety: VOC-free, odorless, RoHS compliant

Example Use Case

• A Mumbai skincare manufacturer applied IGT-59 on walkways, exits & safety zones

• During a power outage, 120+ employees evacuated safely using glowing paths

• Integrated into permanent safety signage system afterward

Ideal For

• Skincare, haircare & makeup plants

• Fragrance & essential oil factories

• Face mask & cosmetic wipes packaging units

• Cosmetic R&D & QC laboratories

• Warehouses storing perfumes, lotions, sensitive raw materials

Radium Paints for Tunnels are specially engineered photoluminescent coatings designed to ensure maximum safety inside tunnels, underground passages, and low-light enclosures. Unlike conventional reflective paints that depend solely on headlights, radium paints absorb natural or artificial light during the day and glow automatically in the dark, providing reliable guidance to drivers and pedestrians when visibility is minimal.

Tunnels are among the most high-risk zones for accidents, especially during power failures, equipment breakdown, or vehicle headlight malfunctions. With Radium Paints for Tunnels, lane markings, crash barriers, walls, and emergency exits remain clearly visible 24x7, helping prevent collisions and enabling safe evacuation in emergencies.

• Self-Luminous Performance: Glows brightly for 10–12 hours after light absorption.

• Power-Free Illumination: No need for electricity, batteries, or backup generators.

• Critical Safety Tool: Enhances tunnel navigation and visibility in blackout situations.

• Durable & Resistant: Withstands heavy traffic, moisture, exhaust gases, and dust.

• Eco-Friendly & Cost-Saving: No recurring power or maintenance costs.

• Long Life Guarantee: Provides effective glow performance for 5+ years.

• Road tunnels on highways and expressways

• Metro rail tunnels and underground corridors

• Mining tunnels and industrial underground passages

• Pedestrian underpasses

• Escape routes, emergency exit signs, and fire safety markings inside tunnels

Installing artificial lighting inside tunnels involves high setup, electricity, and maintenance costs. In contrast, Radium Paints for Tunnels offer a one-time economical solution that ensures visibility during both normal and emergency conditions, with zero energy consumption and no maintenance burden.

In 2024, a 2.5 km mountain tunnel faced frequent power outages, making navigation difficult and unsafe for motorists. Authorities implemented Radium Paints on lane markings, crash barriers, and emergency exit signage.

• Observation: Even during power failures, road lanes and exit routes glowed clearly for more than 10 hours.

• Impact: Accident risk reduced by over 55% in the first six months of use.

• Savings: Authorities saved significant costs by reducing dependency on diesel generators and backup lights.

• User Feedback: Drivers felt more confident while crossing the tunnel, and emergency services praised the improved visibility.

This case demonstrates that Radium Paints for Tunnels are not just an economical coating but a critical life-saving solution for modern infrastructure.

IGT-14 Radium Paint is a photoluminescent, chemical- and solvent-resistant coating designed for refineries, petrochemical plants, and storage facilities. It glows for 10–12 hours after light exposure, ensuring safe visibility during blackouts, emergencies, or shutdowns—making it a superior alternative to Golden Yellow Lane Marking paint.

• Long-lasting glow, zero power requirement

• Resistant to fuels, acids, and vapors

• Fast drying, easy brush or spray application

• Works in high-temperature and explosive zones

• Compatible with RCC, MS, GI, and epoxy surfaces

• Emergency exits, stair edges, safety railings

• Fire hydrants, hose reels, extinguishers

• Walkways, tank farms, process zones

• Electrical panels, gas manifolds, pipeline racks

• System: 2-component polyurethane + acid-alkali hardener

• Pigment: Non-toxic Strontium Aluminate

• Coats: 2 × 60–80 microns

• Drying: Touch-dry 25 min, full cure 6–8 hrs

IGT-14 is a zero-maintenance, glow-in-the-dark safety solution for hazardous oil & gas environments.