Industrial Consultant Corporate

Kharadi, Pune, Maharashtra

We are offering sensor, sensor switch, pir, motion sensor, occupancy sensor, energy saving, energy saver. The pir sensor is used to curtail wastage of electrical energy. This passive infra-red sensor detects heat radiated from moving persons objects and uses this ability to automatically switch on or off lights, air conditioners etc these products can be used in all places where electrical energy is wasted in absence of human presence, like office cabin, back office area, lobby, conference room, changing room, recovery room, cloak room, corridor, staircase, storage places, warehouse, car parking, toilet, kitchen, pantry, garden, etc. to know more about the product please read the following, the sensors installed will detects when somebody or a moving object ( say a car in car parking area opening of a door ) enters in its detection range and will switches on the lights and will turned off the lights when person leaves out the movement stops. Clearly, the sensor is intended to operate lights at an area corresponds to movement occupancy. I.e. On the lights when there is movement occupancy and off the lights when there is no movement occupancy. Apart from this energy saving aspect, it also offers a convenience that it is not needed to often switch on or off the lights; it is in automatic operation. there are three knobs in the sensors, the lux knob, the time knob and the sensitivity knob. The lux knob is used to make the lights on at a desired lux level. The time knob is used to make the light lights off at a desired time period ( of 1 minute to 15mnts). Ex: if the time is set for 3minutes, the lights will turn off after 3 minutes, if there was a movement at the end of 2minutes, then the lights will be off only after 5minutes(=3+2). This way if there is an occupancy movement in the detection area distance the lights will remain on. The sensitivity knob is used to increase decrease the detection distance area. Every sensor has a detection distance, ( for the ceiling mount sensor, when erected at a height of 3.00 mtrs, it covers a an area of 6mtr radius) it can be mounted on ceiling wall, the mounting height varies from 1.8 mtr to 3.8 mtrs. An electrician can easily install this device. Every sensor is attached with an installation manual showing connection diagram.

PIR Motion Sensor (Model : SM02)  are energy saving devices used for home energy saving and industrial energy saving. This infrared motion sensor switch detects movement like human movement, opening of a door, movement of a car in a car parking area and keeps the lights, fans etc ON. IT turns OFF the appliances when its detection area is vacant, saving a considerable amount of energy.

Features

• Very attractive shape & compact size, White ABS plastic body,
• Good quality sensor element (dual sensor element) Top quality Fresnel lens,
• Semi conductor re-settable fuse,
• Short circuit and supply surge protection, Zero cross switching,
• Ceiling / wall mounting option - Can be erected on ceiling or wall,
• Detection range : 360degree x 8 mtrs
• ON time adjustable from 70 seconds to 20 min,
• Lux level adjustable from day mode to night mode - The unit can be set to work at a desired lux level.
• Detection area adjustable from low to high
• 24 months warrenty.

Specifications

• Supply voltage : 230 volts +/- 10%age
• Safe Load : 500watts
• Detectable motion speed : 0.5 to 1.5 mtr/sec