Flush bottom ball valve is also known as bottom valve or drain valve. As the name suggest, it is widely used to flush out the liquid or slurry from the bottom of Reactors, Receivers & Huge Tanks.IVE is a leading flush bottom valve manufacturer. Our Flush bottom valve assures perfect drain of the liquid slurry from the tank. The unique design of the flush bottom ball valve will prevent formation of the dead area in the valve, hence no hold up area in the tank or vessel. This is achieved as ball of the valve will comes in the level with the inlet flange.

Y TYPEFlush bottom valves are used to discharge Liquids &Slurry from the bottom of Reactors, Receivers & huge Tanks. IVE Flush Bottom valves are available in design of Disc opening into the Tank ( vessel opening design) & Disc lowering (inside valve opening design) into the valve body.

Flush bottom valves with disc opening into the tank or opening upwards is the most commonly used. It is used where enough space is available between bottom pad and the starrier of the tank. The mass load inside the tank helps closing & tight shut off the flush bottom valve.

KEY FEATURES AND BENEFITS

• Unique design ofIVEflush bottom valves assure Zero- Hold Up in the bottom pad of the tank. And facilitate the free flow and quick discharge of the liquid or slurry through the valves.
• Casted and fabricated in all available metallurgy, Carbon Steel, S.S 304, S.S 316, S.S 304L, S.S 316L, Alloy 20, Hast alloy and as per special specifications.
• Conical Metal to Metal disc seating/ PTFE seating with option offixed or Renewable seat. Further metal seating can be hard faced by Stellite TM where distortion of seat by aggressive liquid or slurry is common.
• Valves available in the size range of 15 NB to 250 NB in BS, ANSI & DIN standards.
• Available in the design of Jacketed, Actuated &Lined.
• Offered for Sanitaryaseptic application.
• Outlet discharge angle available in 450and can also be tailored made to 600.
• IVE Flush Bottom vales can also be provided with the temperature sensors to measure the temperature in the vessel.
• Bolted Stuffing Box (Gland), easily adjustable & with Repackable service.
• Rinsing & Non Rinsing stem with outside ACME thread.

Pneumaticcylinders are used to automate the working of the IVE Y Type Flush Bottom Valves. Liquid &Slurry can be drained off remotely and with minimum labor. IVE offers pneumatic cylinders with Single acting (fail safe) design and Double acting (stay-put) design.

KEY FEATURES AND BENEFITS

• Automate liquid drain operation, minimize the labor.
• Automation accessories such as solenoid, limit switches, positioner offer as option. Precise control over important process parameters.
• Valves available in the range of 15 NB to 250 NB and in BS, ANSI, DIN, standards.
• Available in the design of Jacketed, Lined and also for the Sanitary application.
• Manual override provided for safety and emergency.
• Casted and fabricated in all available metallurgy, Carbon Steel, S.S 304, S.S 316, S.S 304L, S.S 316L, Alloy 20, Hast alloy and as per special specifications.
• Conical Metal to Metal disc seating/ PTFE seating with option offixed or Renewable seat. Further metal seating can be hard faced by Stellite TM where distortion of seat by aggressive liquid or slurry is common.
• Outlet discharge angle available in 45and can also be tailored made to 60.
• IVE Flush Bottom vales can also be provided with the temperature sensors to measure the temperature in the vessel.
• Bolted Stuffing Box (Gland), easily adjustable & with Repackable service.

Gate valve function as an On-Off or Shuts off valve. And it is used for On-Off flow control in the straight and bigger diameter pipe lines which offer minimum flow resistance. Gate valves are preferred choice with Petroleum, Fertilizer and large Chemical plants.

 

“IVE” Offers “STARTEK” make Gate valves, manufactured by M/S. Star Engineers, India, an API 6D registered Gate valve manufacturer. Gate Valves are offered with the standard specifications or can also be customized as per client’s specifications.

 

Key Features and Benefits of Gate Valve

 

• Manufactured by an API 6D registered company.
• “STARTEK” GATE VALVES are available in range from ½” (15mm) to 24” (600 mm)
• Offered with Outside screw & Yoke type arrangement, Bolted Bonnet design.
• Extended Bonnet Gate valve design for Cryogenic application is also offered.
• Design with Rising Stem Gate valve with Fixed Hand wheels
• Supplied with Regular Gland sealing as well as lantern ring sealing
• Option of Flexible, solid or double Disc wedge design.
• Valves control by Manual hand Wheel or Gear operated as per requirement.
• Used by leading Petrochemical, Oil &

• Gas companies such as ONGC, HPCL, BPCL and IOL.

“STARTEK” GATE VALVES are metal seated Gate valves, manufactured with variety of Trim Options, from Trim 1 to Trim 18 as per user requirement to achieve specific Pressure- Temperature requirements.

 

Key Features and Benefits of Globe Valve

• Manufactured by an API 6D registered Industrial valves manufacturer.
• GLOBE VALVES are available in the range from ½” (15mm) to 12” (150 mm)
• Globe valves are manufactured with the Outside screw & Yoke type arrangement with Bolted Bonnet design.
• For Cryogenic application Extended Bonnet design offered.
• Rising Stem with Rising as well as fixed Hand wheels design.
• Also available in Plug Type Disc Or Parabolic disc design.
• Seat Rings can be Integral as well as renewable.
• Regular Gland sealing as well as lantern ring sealing is also offered as per requirement.
• Back Seating is provided to ensure repacking of Packing rings in on line condition.
• Valves control by Manual hand Wheel or Gear operated as per requirement.
• Used by leading Petrochemical, Oil & Gas companies such as ONGC, HPCL, BPCL and IOL

  Screwed Ends (BSP, NPT)	: ANSI B 1.20.1 ½” (15 mm) to 2” (50 mm)
  Flanged Ends	: ANSI B 16.5 ASA 150# TO ASA 800#
  Socket Weld Ends	: ANSI B 16.11
  Butt Weld Ends	: ANSI B 16.25
  Valve Design	: BS 5351
  Valve testing	: BS 6755

 

Globe valve is a Controlling or Throttling type of control valve. It is used for the precise flow control. Like Gate valve, Globe valve is also preferred choice for Petroleum, Fertilizer and large Chemical plants. While Gate valves are used for On-Off flow control, Globe valves are used for the controlled fluid flow.

“IVE” Offers “STARTEK” make Gate valves, manufactured by M/S. Star Engineers, India, an API 6D registered Globe valve manufacturer. Gate Valves are offered with the standard specifications or can also be customized as per client’s specifications.

Key Features and Benefits of Globe Valve

• Manufactured by an API 6D registered Industrial valves manufacturer.
• GLOBE VALVES are available in the range from ½” (15mm) to 12” (150 mm)
• Globe valves are manufactured with the Outside screw & Yoke type arrangement with Bolted Bonnet design.
• For Cryogenic application Extended Bonnet design offered.
• Rising Stem with Rising as well as fixed Hand wheels design.
• Also available in Plug Type Disc Or Parabolic disc design.
• Seat Rings can be Integral as well as renewable.
• Regular Gland sealing as well as lantern ring sealing is also offered as per requirement.
• Back Seating is provided to ensure repacking of Packing rings in on line condition.
• Valves control by Manual hand Wheel or Gear operated as per requirement.
• Used by leading Petrochemical, Oil & Gas companies such as ONGC, HPCL, BPCL and IOL.

“STARTEK” GLOBE VALVES are metal seated Globe valves manufactured with variety of Trim Options, varying from Trim 1 to Trim 20 as per user requirement to achieve specific Pressure Temperature requirements.

We are offering check valve.As the name suggest, check valve or non return valve (nrv) allows liquid to flow in one direction only. It prevents back flow of media in the reverse direction. Ive offers startek make check valves, manufactured by ms. Star engineers, india, and an api 6d registered industrial valves manufacturer. Along with gate and globe valve, check vales are also preferred choice with petroleum, fertilizer and large chemical plants. An important concept in check valves is the cracking pressure which is the minimum upstream pressure at which the valve will operate. Typically the check valve is designed for and can therefore be specified for a specific cracking pressure.

As the name suggest, Check valve or Non Return Valve (NRV) allows liquid to flow in one direction only. It prevents Back flow of media in the reverse direction.

IVE Offers STARTEK make Check valves, manufactured by M/S. Star Engineers, India, and an API 6D registered industrial valves manufacturer.

Along with Gate and Globe valve, Check vales are also preferred choice with Petroleum, Fertilizer and large Chemical plants.

An important concept in check valves is the cracking pressure which is the minimum upstream pressure at which the valve will operate. Typically the check valve is designed for and can therefore be specified for a specific cracking pressure.

Key Features and Benefits of CheckValve Or Non Retrun Valve

• STARTEK CHECK VALVES are available in size in the range from (15mm) to 24 (600 mm)
• Check valves are manufactured with Bolted Bonnet, Screwed Bonnet Design.
• Non Return Valve can be mounted in Horizontal as well as Vertical direction by selecting Lift or Swing Type Design respectively.
• Seat Rings can be Integral as well as renewable design.
• Wafer Type check Valve & Disc Check valve are also available, which can be sandwich between two flanges.

We are offering butterfly valve. Butterfly valve is a cheaper & better option for in line onoff applications. To some extent it is also being used for the throttling flow control purpose. “ive” is a leading butterfly valve manufacturer. And supplies wide range of butterfly valve in standard as well as custom requirement.

Key Features and Benefits of High Performance Butterfly Valve

• Butterfly Valves are available in size range from 1 ½” (40mm) to 24” (600 mm)
• Valves are rubber seated with Metal disc to ensure Tight shut off. The Rubber seating can be Provided in both Renewable as well as molded forms.
• Flanged Butterfly valve is concentric in design & can be sandwiched between Flanges of ASA 150# / 300# / BS 10 Table “D” / “E” / PN-10 / PN-16.
• Available with a variety of On/Off variants such as Manual and Geared operated.
• Automated valve solution with actuated butterfly valve. Rotary Quarter Turn Single acting or Double acting Actuators, with other accessories such as Solenoid valves, Limit Switches, Positioners, Manual Overrides . Butterfly valves are supplied with Pneumatic or Electrical Actuator.
• Available in Wafer type butterfly valve and Sanitary Butterfly valve with Triclover Ends.

“IVE” Supplies soft seated Butterfly valves with variety of seating material to withstand temperature from -300 C to +2000C. “IVE” supplies valves with seats of Nitrile, EPDM, Silicon, Hypalon, Viton, Virgin PTFE, FEP, PFA achieve these Temperatures & applications.