Innovatec Systems

Kondhwa, Pune, Maharashtra

Application area : The VEGAPULS 64 is a sensor for continuous level measurement of liquids. With small tanks or in case of narrow space the small process fittings offer special advantages. The very good signal focusing enables the use in vessels with many installations such as e.g. stirrers and heating spirals.

Your benefit

• Exact measuring results independent of process conditions
• High plant availability, because wear and maintenance-free
• Maintenance-free operation through non-contact measuring principle

Function : The sensor emits a continuous radar signal through the antenna. The emitted signal is reflected by the medium and received as an echo by the antenna. The frequency difference between the emitted and received signal is proportional to the distance and depends on the filling height. The determined filling height is converted into a respective output signal and outputted as measured value.

Version

• With plastic horn antenna ø 80 mm
• Thread with integrated horn antenna
• Flange with encapsulated antenna system
• Hygienic fitting with encapsulated antenna system

Materials :  The wetted parts of the instrument are made of 316L, PP, PTFE or PEEK. The process seal is made of FKM, FFKM, EPDM or PTFE.

Housing versions :  The housings are available as single chamber or double chamber version in plastic, stainless steel or aluminium. They are available with protection ratings up to IP 68 (1 bar).

Electronics versions : The instrument is available with electronics 4 - 20 mA/HART as well as HART and power pack.

Adjustment

• Adjustment on the measurement loop : The adjustment of the instrument is carried out via the optional display and adjustment module PLICSCOM or via a PC with the adjustment software PACTware and corresponding DTM.
• Wireless adjustment via Bluetooth : The Bluetooth version of display and adjustment module enables a wireless connection to standard adjustment units. This can be smartphones/tablets with iOS or Android operating system or PCs with PACTware and Bluetooth USB adapter. Adjustment is hence carried out via a free-of-charge app from the Apple App Store or the Google Play Store or the adjustment software PACTware and respective DTM.
• Adjustment via remote systems : Further adjustment options are possible via a HART Communicator as well as manufacturer-specific programs such as AMS™ or PDM.

Materials, wetted-parts

• PFA
• PTFE
• 316L
• Alloy C22 (2.4602)
• PEEK

Hygenic-fittings

• Clamp ≥ 2", DN50 - DIN32676, ISO2852
• Slotted nut ≥ 2", DN50 - DIN 11851
• DRD connection ø 65 mm
• for NEUMO BioControl D50 PN16 / 316L

Seal-material

• EPDM
• FKM
• FFKM

Housing-material

• Plastic
• Aluminium
• Stainless steel (precision casting)
• Stainless steel (electropolished)

Protection-rating

• IP 66/IP 68 (0.2 bar)
• IP 66/IP 67
• IP 66/IP 68 (1 bar)

The VEGAFLEX 81 level sensor measures maintenance-free all kind of liquids. Even in applications with vapour, buildup, foam generation and condensation, the sensor delivers precise and reliable measured values. The VEGAFLEX 81 is the economical solution for various level and interface measurements.

Application area :  With VEGAFLEX 81 you can measure all kinds of liquids essentially maintenance free. The sensor delivers precise and reliable measured values even in applications with steam, buildup, foam generation or condensation. VEGAFLEX 81 is a truly cost-effective level and interface sensor for your measuring task.

Your benefit

• The guided adjustment enables a simple, time-saving and reliable setup
• Shortenable probes offer a simple standardisation and highest flexibility in the planning
• Comprehensive diagnostic possibilities ensure a maintenance-free operation and hence a high plant availability

Function : High frequency microwave pulses are coupled onto a cable or rod and guided along the probe. The pulse is reflected by the product surface. The time from emission to reception of the signals is proportional to the level in the vessel.

Measuring range

• Cable probe up to 75 m (246.1 ft)
• Rod probe up to 6 m (19.69 ft)

Operating voltage

• Version for low voltage 9.6 - 48 V DC, 20 - 42 V AC, 50/60 Hz
• Version for mains voltage 90 - 253 V AC, 50/60 Hz

Materials : The wetted parts of the instrument are made of stainless steel. The instrument seal is made either of FKM, FFKM or EPDM.

Housing versions : The housings are available as double chamber version in plastic, stainless steel or Aluminium. They are available in protection class IP 66/ IP 67.

Electronics versions : The instruments are available in different electronics versions. Apart from the two-wire electronics with 4 - 20 mA/HART, a four-wire version and two purely digital versions with Profibus PA and Foundation Fieldbus are available.

Operation : The adjustment of the instrument is carried out via the optional display and adjustment module PLICSCOM or via a PC with the adjustment software PACTware and corresponding DTM. Further adjustment options are available via HART communicator as well as manufacturerspecific programs such as AMS™ or PDM.

Version

• Basic version for exchangeable cable ø 2; ø 4 mm
• Basic version for exchangeable rod ø 8 mm
• Basic version for exchangeable rod ø 12 mm
• Coax version ø 21.3 mm for ammonia application
• Coax version ø 21.3 mm with single hole
• Coax version ø 21.3 mm with multiple hole
• Coax version ø 42.2 mm with multiple hole
• Exchangeable rod ø 8 mm
• Exchangeable rod ø 12 mm
• Exchangeable cable ø 2 mm with gravity weight
• Exchangeable cable ø 4 mm with gravity weight
• Exchangeable cable ø 2 mm with centering weight
• Exchangeable cable ø 4 mm with centering weight
• Exchangeable cable ø 4 mm without weight exchangeable, PFA-coated cable ø4 mm with non-coated centering weight

Materials, wetted-parts

• PFA
• 316L
• Alloy C22 (2.4602)
• Alloy 400 (2.4360)
• Alloy C276 (2.4819)
• Duplex (1.4462)
• 304L

Seal-material

• EPDM
• FKM
• FFKM
• Silicone FEP coated
• Borosilicate glass

Housing-material

• Plastic
• Aluminium
• Stainless steel (precision casting)
• Stainless steel (electropolished)

Protection-rating

• IP 66/IP 68 (0.2 bar)
• IP 66/IP 67
• IP 66/IP 68 (1 bar)

Output

• Profibus PA
• Foundation Fieldbus
• 4- 20 mA/HART - two-wire
• Modbus
• 4 - 20 mA/HART - four-wire

The ace for level measurement and interface measurement in all liquids : The VEGAFLEX 81 guided radar sensor is exceptional when it comes to measuring the level or interface of liquids. Guided radar is extremely versatile and can be found in almost every industrial sector. Whether bitumen or liquefied gas, in storage containers or standpipes, in a metering tank or in tank farms – VEGAFLEX 81 measures the level or interface (separation layers) of liquids with great reliability and accuracy. Guided radar delivers reliable measurements data for control or safety systems for

• Level measurement in ammonia storage tanks
• Level measurement in standpipes
• Interface measurement in storage tanks, bypass tubes, standpipes