Ahmedabad, Gujarat, India
GST : 24AACCI2791M1ZB
Verified
Add Review
Our Product / Services
presently in some of industry, condensate is collected in the collection tank and there after it is being pumped by conventional electrically operated centrifugal pumps. in this process 15-20 c temperature reduce as it is stored in collection tank. while in boiler condensate pump condensate water is pumped as soon as it is filled. so there is not significant temperature drop.
electrical pump require frequent maintenance, while boiler condensate pump have only float type moving part which is fit and forgot type.
electrical pump faces the problem of dry running due to high vapour pressure while boiler condensate pump will never have these problems.
electrical pump faces the cavitations and pitting problems while boiler condensate pump will never have this problem.
features
1. boiler condensate pump having no moving part assured zero maintenance.
2. boiler condensate pump utilise of flash steam.
3. boiler condensate pump suitable for high temp. application. no cavitations problem
4. in condensate recovery pump less steam consumption at low pressure.
5. boiler condensate pump can be operated on compressed air.
6. boiler condensate pump automatic venting of air & non - condensable gases
7. easy monitoring of boiler condensate pump operation can be checked in sight glass.
8. boiler condensate pump of various sizes for different capacities.( max. cap.12, 000 kg/hr )
9. boiler condensate pump skid mounted so easy to install.
application :
boiler condensate pump use for tracing line, radiator, cyclinder, dryer, heat exchanger, vessels, jacketing, oven, heating tank
condensate recovery pump use for industries like pharma, textile, automobile, petro chemical, paper mill, sugar mill, processing unit, chemical etc
Additional Information:
Packaging Details : WOODEN BOX
Delivery Time : 1 WEEK
presently in some of industry, condensate is collected in the collection tank and there after it is being pumped by conventional electrically operated centrifugal pumps. in this process 15-20 c temperature reduce as it is stored in collection tank. while in boiler condensate pump condensate water is pumped as soon as it is filled. so there is not significant temperature drop.
electrical pump require frequent maintenance, while boiler condensate pump have only float type moving part which is fit and forgot type.
electrical pump faces the problem of dry running due to high vapour pressure while boiler condensate pump will never have these problems.
electrical pump faces the cavitations and pitting problems while boiler condensate pump will never have this problem.
features
1. boiler condensate pump having no moving part assured zero maintenance.
2. boiler condensate pump utilise of flash steam.
3. boiler condensate pump suitable for high temp. application. no cavitations problem
4. in condensate recovery pump less steam consumption at low pressure.
5. boiler condensate pump can be operated on compressed air.
6. boiler condensate pump automatic venting of air & non - condensable gases
7. easy monitoring of boiler condensate pump operation can be checked in sight glass.
8. boiler condensate pump of various sizes for different capacities.( max. cap.12, 000 kg/hr )
9. boiler condensate pump skid mounted so easy to install.
application :
boiler condensate pump use for tracing line, radiator, cyclinder, dryer, heat exchanger, vessels, jacketing, oven, heating tank
condensate recovery pump use for industries like pharma, textile, automobile, petro chemical, paper mill, sugar mill, processing unit, chemical etc
Additional Information:
Packaging Details : WOODEN BOX
Delivery Time : 1 WEEK
Presently in some of industry, condensate is collected in the collection tank and there after it is being pumped by conventional electrically operated centrifugal pumps. In this process 15-20 C temperature reduce as it is stored in collection tank. While in Boiler condensate pump condensate water is pumped as soon as it is filled. So there is not significant temperature drop.
Electrical pump require frequent maintenance, while Boiler condensate pump have only float type moving part which is fit and forgot type.
Electrical pump faces the problem of dry running due to high vapour pressure while Boiler condensate pump will never have these problems.
Electrical pump faces the cavitations and pitting problems while Boiler condensate pump will never have this problem.
Features
1. Boiler condensate pump having no moving part assured zero maintenance.
2. Boiler condensate pump utilise of flash steam.
3. Boiler condensate pump Suitable for high temp. Application. No cavitations problem
4. In Condensate recovery pump less steam consumption at low pressure.
5. Boiler condensate pump Can be operated on compressed Air.
6. Boiler condensate pump Automatic venting of Air & Non - Condensable gases
7. Easy monitoring of Boiler condensate pump operation can be checked in sight glass.
8. Boiler condensate pump of Various sizes for different capacities.( max. cap.12, 000 kg/hr )
9. Boiler condensate pump skid Mounted so easy to install.
Application :
Boiler condensate pump use for tracing line, radiator, cyclinder, dryer, heat exchanger, vessels, jacketing, Oven, heating tank
Condensate recovery pump use for Industries like Pharma, Textile, Automobile, Petro chemical, Paper mill, Sugar mill, Processing unit, chemical etc
Additional Information:
Packaging Details : WOODEN BOX
Delivery Time : 1 WEEK
MECHANICAL CONDENASATE PUMPThere are Condensate recovery unit or power pressure pump use for transfer steamcondensate from plant to boiler feed water tank with help of motive steam or air.Working of Principal Condensate recovery pump or Power pressure pump: There are two stage of pump working 1) Filling Mode: Condensate from process will be collected in pump receiver tank due togravity it will open Check valve and start filling pumping tank. By this time motive inletis closed and vent outlet is open so there is no back pressure. This will lead level low tohigh.2) Pumping Mode: As the level reaches set high level vent valve shut off and open the motive steam or air valve. This will allow motive steam or air in tank and push the water level in downward direction. By this time Delivery Check Valve will be open and inlet check valve shut off.When low level reached automatically repeat the cycle. I.e. shut off the motive valveand open the exhaust.In Comman mechanical pump there are mechanical assembly which are very complicated and lot of moving part. It cost is to high. Also SS float puncture with time due to constant expansion and contraction due to temperature variation.While In our system "APPLIED FOR PATENT" We avoid complication of the operation. We remove ss float which are puncher after some time. We use special material float which can operate for almost life time. So there are no wear and tear will be there so it's almost maintenance free. Our system will be working for almost it's life cycle.Features1. Pump Total Material are SS 304 Material so life is long life.2. Float material is Special Materials so it will not punctured.3. No moving part assured zero maintenance.4. Suitable for high temp. Application. No cavitationsproblem5. Can be operated oncompressed Air.6. Various sizes for different capacities.(max. cap.12, 000 kg/hr)
Additional Information:
Packaging Details : Wooden Box
Delivery Time : 1 week
MECHANICAL CONDENASATE PUMPThere are Condensate recovery unit or power pressure pump use for transfer steamcondensate from plant to boiler feed water tank with help of motive steam or air.Working of Principal Condensate recovery pump or Power pressure pump: There are two stage of pump working 1) Filling Mode: Condensate from process will be collected in pump receiver tank due togravity it will open Check valve and start filling pumping tank. By this time motive inletis closed and vent outlet is open so there is no back pressure. This will lead level low tohigh.2) Pumping Mode: As the level reaches set high level vent valve shut off and open the motive steam or air valve. This will allow motive steam or air in tank and push the water level in downward direction. By this time Delivery Check Valve will be open and inlet check valve shut off.When low level reached automatically repeat the cycle. I.e. shut off the motive valveand open the exhaust.In Comman mechanical pump there are mechanical assembly which are very complicated and lot of moving part. It cost is to high. Also SS float puncture with time due to constant expansion and contraction due to temperature variation.While In our system "APPLIED FOR PATENT" We avoid complication of the operation. We remove ss float which are puncher after some time. We use special material float which can operate for almost life time. So there are no wear and tear will be there so it's almost maintenance free. Our system will be working for almost it's life cycle.Features1. Pump Total Material are SS 304 Material so life is long life.2. Float material is Special Materials so it will not punctured.3. No moving part assured zero maintenance.4. Suitable for high temp. Application. No cavitations problem5. Can be operated on compressed Air.6. Various sizes for different capacities.(max. cap.12, 000 kg/hr)
Additional Information:
Payment Terms :
Packaging Details : wooden box.
Delivery Time : 1 week
There are Power Pressure Pump Package Unit or Condensate recovery unit or power pressure pump use for transfer steam
condensate from plant to boiler feed water tank with help of motive steam or air.
Working of Principal Condensate recovery pump or Power pressure pump: There are two stage of pump working 1) Filling Mode: Condensate from process will be collected in pump receiver tank due to
gravity it will open Check valve and start filling pumping tank. By this time motive inlet
is closed and vent outlet is open so there is no back pressure. This will lead level low to
high.
2) Pumping Mode: As the level reaches set high level vent valve shut off and open the motive steam or air valve. This will allow motive steam or air in tank and push the water level in downward direction. By this time Delivery Check Valve will be open and inlet check valve shut off.
When low level reached automatically repeat the cycle. I.e. shut off the motive valve
and open the exhaust.
In Comman mechanical pump there are mechanical assembly which are very complicated and lot of moving part. It cost is to high. Also SS float puncture with time due to constant expansion and contraction due to temperature variation.
While In our system "APPLIED FOR PATENT" We avoid complication of the operation. We remove ss float which are puncher after some time. We use special material float which can operate for almost life time. So there are no wear and tear will be there so it's almost maintenance free. Our system will be working for almost it's life cycle.
Features
1. Pump Total Material are SS 304 Material so life is long life.
2. Float material is Special Materials so it will not punctured.
3. No moving part assured zero maintenance.
4. Suitable for high temp. Application. No cavitations problem
5. Can be operated on compressed Air.
6. Various sizes for different capacities.(max. cap.6, 000 kg/hr)
Additional Information:
Payment Terms : L/C,
Packaging Details : Wooden Box
Delivery Time : 1 week
