IEPL Steam Traps come standard with our 10 year performance guarantee against orifice erosion and steam wastage.

See below the smooth steam flow in IEPL Steam trap compare to other mechanical steam trap.

Due to the traps unique orifice design there is TRUE continuous condensate discharge without any open/close cycles rather than intermittent discharge unlike traditional mechanical type steam traps.

It is important to know that acceptable loss from 50 Rectus steam traps is LESS than that of 1 failed open mechanical type steam trap. And CO2emissions are reduced through reducing steam consumption and boiler fuel usage by up to 20%.

Benefits

• No moving parts
• No spare parts required
• Permanently eliminate the need for steam trap surveys & repairing cost.
• Environmentally Friendly
• Save water
• Save water treatment chemicals
• Save electricity
• Handles varying or constant loads
• Easily handles water hammer
• Automatic air venting at start-up
• Perfect operation in vertical or horizontal installation.

IEPL Steam Traps come standard with our 10 year performance guarantee against orifice erosion and steam wastage.

See below the smooth steam flow in IEPL Steam trap compare to other mechanical steam trap.

Due to the traps unique orifice design there is TRUE continuous condensate discharge without any open/close cycles rather than intermittent discharge unlike traditional mechanical type steam traps.

It is important to know that acceptable loss from 50 Rectus steam traps is LESS than that of 1 failed open mechanical type steam trap. And CO2emissions are reduced through reducing steam consumption and boiler fuel usage by up to 20%.

Benefits

• No moving parts
• No spare parts required
• Permanently eliminate the need for steam trap surveys & repairing cost.
• Environmentally Friendly
• Save water
• Save water treatment chemicals
• Save electricity
• Handles varying or constant loads
• Easily handles water hammer
• Automatic air venting at start-up
• Perfect operation in vertical or horizontal installation.

IEPL Steam Traps come standard with our 10 year performance guarantee against orifice erosion and steam wastage.

See below the smooth steam flow in IEPL Steam trap compare to other mechanical steam trap.

Due to the traps unique orifice design there is TRUE continuous condensate discharge without any open/close cycles rather than intermittent discharge unlike traditional mechanical type steam traps.

It is important to know that acceptable loss from 50 Rectus steam traps is LESS than that of 1 failed open mechanical type steam trap. And CO2emissions are reduced through reducing steam consumption and boiler fuel usage by up to 20%.

Benefits

• No moving parts
• No spare parts required
• Permanently eliminate the need for steam trap surveys & repairing cost.
• Environmentally Friendly
• Save water
• Save water treatment chemicals
• Save electricity
• Handles varying or constant loads
• Easily handles water hammer
• Automatic air venting at start-up
• Perfect operation in vertical or horizontal installation.

Main function of any steam trap is to trap the steam and drain out the condensate water. In industry there are many types of steam trap like thermodynamic steam trap, float steam trap, inverted bucket steam trap & Venturi Orifice steam trap. There is huge difference in working principle of Venturi float Steam trap and other regular steam trap. There are mainly two problems in other regular mechanical operating steam traps are as under so preventive testing and maintenance required frequently. 1.Steam traps fail in open condition ( Occur mostly in TD steam trap): 2.Steam traps fail in closed condition so backing up condensate causing (Occur mostly in Float and Bucket steam trap):Note : In float steam trap there are permanent steam loss through SLR. All these problems are eliminated in Venturi Float Steam trap due to there are Ventury and float two orifice are in working. In Venturi float Steam Trap there are two orifice working to remove condensate from Steam System. One is Venturi orifice which is design as per client condensate load and pressure at inlet of trap and second is float valve orifice. Ventury orifice nozzle is sized to handle 100% of the condensate load produced by a particular application. Normally ventury orifice is in working condition. Float orifice is in closed condition. Some time at starting of process and low pressure condition there are float orifice is open and remove excess water from system. So this Venturi Float steam trap can cope up efficiently the condensate load at start up, normal running and pick load condition.DESIGN FEATURESTwo orifice mechanism control condensate flow at all levelsTailor made Venturi orifice design control condensate flow automaticallyContinuous discharge of condensate Efficient condensate discharges due to 0.001 kg/cm2 differential pressure against 0.1 kg/cm2of other make trapBuilt in air vent for quick start upWear resistance construction as SG iron cover and base & stainless steel internals partAdvantages and BenefitsNo SLR so no steam wastage due to miss setting of SLRMoving parts is rarely work and so no required maintenance for long timePermanently eliminate the need of steam trap survey and repairing costCO2 emissions are reduced through reducing steam consumption and boiler fuel usage.Environment FriendlySave water and water treatment chemicalsPermanent steam savings about 10 to 45%Increased heat transfer typically 10%Unaffected by thermal shock or water hammer so increasing plant life.

IEPL Steam Traps come standard with our 10 year performance guarantee against orifice erosion and steam wastage.

See below the smooth steam flow in IEPL Steam trap compare to other mechanical steam trap.

Due to the traps unique orifice design there is TRUE continuous condensate discharge without any open/close cycles rather than intermittent discharge unlike traditional mechanical type steam traps.

It is important to know that acceptable loss from 50 Rectus steam traps is LESS than that of 1 failed open mechanical type steam trap. And CO2emissions are reduced through reducing steam consumption and boiler fuel usage by up to 20%.

Benefits

• No moving parts
• No spare parts required
• Permanently eliminate the need for steam trap surveys & repairing cost.
• Environmentally Friendly
• Save water
• Save water treatment chemicals
• Save electricity
• Handles varying or constant loads
• Easily handles water hammer
• Automatic air venting at start-up
• Perfect operation in vertical or horizontal installation.

IEPL Steam Traps come standard with our 10 year performance guarantee against orifice erosion and steam wastage.

See below the smooth steam flow in IEPL Steam trap compare to other mechanical steam trap.

Due to the traps unique orifice design there is TRUE continuous condensate discharge without any open/close cycles rather than intermittent discharge unlike traditional mechanical type steam traps.

It is important to know that acceptable loss from 50 Rectus steam traps is LESS than that of 1 failed open mechanical type steam trap. And CO2emissions are reduced through reducing steam consumption and boiler fuel usage by up to 20%.

Benefits

• No moving parts
• No spare parts required
• Permanently eliminate the need for steam trap surveys & repairing cost.
• Environmentally Friendly
• Save water
• Save water treatment chemicals
• Save electricity
• Handles varying or constant loads
• Easily handles water hammer
• Automatic air venting at start-up
• Perfect operation in vertical or horizontal installation.

IEPL Steam Traps come standard with our 10 year performance guarantee against orifice erosion and steam wastage.

See below the smooth steam flow in IEPL Steam trap compare to other mechanical steam trap.

Due to the traps unique orifice design there is TRUE continuous condensate discharge without any open/close cycles rather than intermittent discharge unlike traditional mechanical type steam traps.

It is important to know that acceptable loss from 50 Rectus steam traps is LESS than that of 1 failed open mechanical type steam trap. And CO2emissions are reduced through reducing steam consumption and boiler fuel usage by up to 20%.

Benefits

• No moving parts
• No spare parts required
• Permanently eliminate the need for steam trap surveys & repairing cost.
• Environmentally Friendly
• Save water
• Save water treatment chemicals
• Save electricity
• Handles varying or constant loads
• Easily handles water hammer
• Automatic air venting at start-up
• Perfect operation in vertical or horizontal installation.

Main function of any steam trap is to trap the steam and drain out the condensate water. In industry there are many types of steam trap like thermodynamic steam trap, float steam trap, inverted bucket steam trap & Venturi Orifice steam trap. There is huge difference in working principle of Venturi float Steam trap and other regular steam trap. There are mainly two problems in other regular mechanical operating steam traps are as under so preventive testing and maintenance required frequently. 1.Steam traps fail in open condition ( Occur mostly in TD steam trap): 2.Steam traps fail in closed condition so backing up condensate causing (Occur mostly in Float and Bucket steam trap):Note : In float steam trap there are permanent steam loss through SLR. All these problems are eliminated in Venturi Float Steam trap due to there are Ventury and float two orifice are in working. In Venturi float Steam Trap there are two orifice working to remove condensate from Steam System. One is Venturi orifice which is design as per client condensate load and pressure at inlet of trap and second is float valve orifice. Ventury orifice nozzle is sized to handle 100% of the condensate load produced by a particular application. Normally ventury orifice is in working condition. Float orifice is in closed condition. Some time at starting of process and low pressure condition there are float orifice is open and remove excess water from system. So this Venturi Float steam trap can cope up efficiently the condensate load at start up, normal running and pick load condition.DESIGN FEATURESTwo orifice mechanism control condensate flow at all levelsTailor made Venturi orifice design control condensate flow automaticallyContinuous discharge of condensate Efficient condensate discharges due to 0.001 kg/cm2 differential pressure against 0.1 kg/cm2of other make trapBuilt in air vent for quick start upWear resistance construction as SG iron cover and base & stainless steel internals partAdvantages and BenefitsNo SLR so no steam wastage due to miss setting of SLRMoving parts is rarely work and so no required maintenance for long timePermanently eliminate the need of steam trap survey and repairing costCO2 emissions are reduced through reducing steam consumption and boiler fuel usage.Environment FriendlySave water and water treatment chemicalsPermanent steam savings about 10 to 45%Increased heat transfer typically 10%Unaffected by thermal shock or water hammer so increasing plant life.