GST : 27AFNPK8304B1ZL
Verified
Write a Review
Our Product / Services
Calibrators And Monitoring Systems
2 Products availablePollution Control Machines & Devices
2 Products availableMeasuring Instruments & Equipment
2 Products availableLeading Manufacturer, Supplier & Retailer of Personal Sampling Cyclone.
The field air flow calibrator is ideal for field calibration of PM2.5 Sampler. It works with a precise flow of 16.67LPM and calibrate air flow ranging from 1-30 LPM. The calibrator is available with measuring provision for barometric pressure and ambient temperature and NIST traceability. It is suitable for temperature range of -30° to +55° C and displays both actual and standard flow rates. The device is and is powered by battery. It is simple in operation with no moving parts. The flow through the instrument is uninterrupted and the graphic software provides a continuous output display for all the functions.
The Gilian Gilibrator 2 Calibration System is an easy to use Primary Standard for the calibration of air sampling equipment. The system includes a high accuracy, electronic flow meter that provides instantaneous air flow readings and cumulative averaging of multiple samples. Three Wet Cell Assemblies provide a wide range of flow rates and are easily interchangeable using twist-on/off mounting.
Features
Flow range, Accuracy
Dimension
The Go-Cal™ air flow calibrator is a portable, battery-operated calibrator that is lightweight, easy to use, and accurate within 2% of reading. Go-Cal™ displays volumetric flow rate continuously allowing adjustments to pump flow-rate in real-time. The Go-Cal™ displayed flow rate is compensated for temperature making it easier to produce consistent results at various calibration locations.
Features
Water is undoubtedly the most precious natural resource that exists on our planet. Without the seemingly invaluable compound comprised of hydrogen & Oxygen, life on earth would be non-existent. Although we as humans recognize this fact, we disregard it by polluting our rivers, lakes and ocens. Instrumex provides practical solutions for problems like Water Pollution, contamination of water resources by harmful wastes, etc. Chemical Oxygen Demand (COD) is used as a measure of oxygen requirement of a sample that is susceptible to oxidation by strong chemical oxidents.
Key Features
Instrumex brand Kbr Hydraulic Pres os suitable for making 13mmm dia die Or Ultra micro die with a set of Evocable Kbr Die for IR Spectroscopy solid sampling. The die produces a disc of 13 mm diameter from which a spectrum may be obtained. Using full beam energy if the instrument without use of a beam condenser. A nipple is fitted in the die for evacuated. This die easily can be dismental for cleaning purpose.
Accessories For IR
HTC – AVM-07 Anemometer is used for Velocity and Air flow measurement with highly advanced Technology. It has the Special function like Data Memorized, Air Velocity, Temperature Sensor, Auto power OFF etc. It comes with standard accessories viz. Sensor probe, Hard carrying case, Manual.
Key Features
Air Velocity
| Basic Function | Range | Resolution | Basic Accuracy |
|---|---|---|---|
| m/s (meter/Second) | 0.40 ~ 45.0m/s | 0.1m/s | ±(2% +0.1m/s) |
| km/h (kilometers/Hour) | 1.4 ~162.0 km/hr | 0.1km/hr | ±(2% +0.1km/hr) |
| Ft/min (Feet/minute) | 80~8860 ft/min | 0.1ft/min | ±(2% +0.1ft/min) |
| Knots(Nautical MPH) | 0.8 ~88.0 Knots | 0.1 knots | ±(2% +0.1knots) |
Air Flow
| Basic Function | Range | Resolution | Accuracy |
|---|---|---|---|
| CMM(m³/min) | 0~9999 m³/min | 0.001~1 | - |
| CFM(ft³/min) | 0~9999 ft³/min | 0.001~1 | - |
| Beaufort Scale | 0~12 | 0.1 | ±0.5 |
| Wave Height | 0~14 | 0.1 | ±0.1 |
| Air Temperature | 0~60˚C | 0.1˚C | 0.5˚C |
| - | 32~140˚F | 0.1˚F | 0.9˚F |
Lutron LX-101A is a Precise, easy readout and wide range lux meter. It provides high accuracy measurement. It has Built in low battery indicator. It is compact, light-weigth and gives excellent operation. Its LCD display can clearly read out of even of high ambient light.
Key Features
The most versatile and compact Environmental Air Monitoring System that combines high quality Weather monitoring sensors with Ambient Air Quality parameters to give a complete system for all kinds of Environmental data.
Applications
Designed for the Health & Safety monitoring of Hand Arm Vibration. Filter selection is fixed using the Wh filter for Hand Arm operation making the Excieo usability straightforward. ISO8041:1990 type 1 and latest draft of ISO8041 revision (Human Vibration Meters) ISO8041: 2005 BS4675:1978, ISO2954:1975 Requirements for Instruments measuring vibration severity ROHS compliant.
Features
VB-8201HA is used in Applications for industrial vibration monitoring : All industrial machinery vibrates. The level of vibration is a useful guide to machine condition. Poor balance, misalignment and looseness of the structure will cause the vibration level increase, it is asure sign that the maintenance is needed.
Features
NK107 is an Outdooor Monitoring Station, Dedicated Application Specific Measurement Templates and with Occupational safety mode. It provides 1/1 & 1/3 Octave Band Analysis. Is also has Linear Operating Range of 95dB. NK107 has Hearing Protection Database With a battery back up of 48 Hours, the system can run trouble free in outdoor atmosphere without any external continuous power.
Features
Frequency Range
Power Supply
Dimension
The GA607 meets the demanding standards of a class 1 calibrator. It features two calibration levels, 94dB and 104dB re 20μPa both at 1kHz. It is for use with 1/2" microphones. Using the GA607, a sound level meter can be checked at two meter scale points and usually on two ranges. Supplied with GA690 barometer
Features
it is integrating sound level meter, class 2 model : sl-4035sd. it is real time data logger, save the data into the sd memory card and can be downloaded the excel, extra software is no need. also, frequency and time weighting meet iec 61672-1class 2, iec 60804 type 2, sd card real time data recorder
features
Ambient Air Quality Monitoring Station in compliance with the USEPA & CPCB (Delhi)
Accessories
Details
| Pollutant | Range | Technology |
|---|---|---|
| PM10 | 1 – 10 mg/m3 | Beta Gauge Attenuation |
| PM2.5 | 1 – 10 mg/m3 | Beta Gauge Attenuation |
| SO2 | 0 – 100 ppb F.S. | UV Fluorescence |
| 0 – 20 ppm F.S. | ||
| NOx | 0 – 100 ppb F.S. | Chemiluminescence |
| 0 – 20 ppm F.S. | ||
| CO | 0 – 50 ppm F.S. | Non Dispersive Infra Red (NDIR) |
| 0 – 1,000 ppm F.S. | ||
| O3 | 0 – 100 ppb F.S. | UV Photometric Absorption |
| 0 – 100 ppm F.S. |
PE-SPMMS-C91 (LBS) is an on-line dust monitoring device using the mainstream technology of laser back scattered light principle with imported core components. PE-SPMMS-C91(LBS) is mainly used for continuous monitoring of various sources emissions of particulate matter concentrations. It can be either Equipped either with CEMS .
It is available for monitoring and control of soot emission , flue gas DeSOx and removal of dust for power generation boilers, industrial furnaces , industrial boilers in the thermal power, iron and steel metallurgy , petrochemical , chemical , cement production, ceramics , waste incineration etc.
Key Features
Measured Parameters :
Derived Parameters :
Features
Includes
Details :
Filter papers in Quartz, PTFE & GFA available in various sizes.
Details :
Cyclones For PM1
Cyclones For Respirable Dust (PM10 & PM 4)
Cyclones For Total Dust
It's simple automatic operation, continuous measurement and digital display of all or any selected gas and derived parameters make it a valuable aid for on-site instant analysis and follow-ups action. Its data logging and computer interface features can be used for further detailed analysis. It is a Compact, Rugged and Intelligent instrument for Ambient Monitoring, Pre-Entry Check, Quality Control Process Or Emission Gas Analysis, Fuel Combustion Optimization.
Key Features
Gases & Ranges
| Gases | Ranges |
|---|---|
| CO | 0-500/4000 PPM / 10%V/V |
| H2S | 0-50/500 PPM |
| SO2 | 0-20/2000 PPM |
| NH3 | 0-100/500 PPM |
| NO | 10/5000 PPM |
| NO2 | 0-200/2000 PPM |
| CL2 | 0-5/500 PPM |
| O2 | 0-25%/100% |
| HBr | 0-5/200 PPM |
| CO2 | 0-100% V/V |
| H2 | 0-5%/100% |
| CH4 | 0-100%V/V |
| - | 0-100% LEL |
Standalone Gaseous Sampling Kit enables sampling of 4 gases at a time. Housed in a light weight powder coated aluminum assembly, this kit is extremely portable rain/dust proof. A digital timer for automatic start and stop provision ensures accurate sampling time.
The vacuum pump is a diaphragm type housed inside the cabinet with for exhaust fans. This ensures that the temperature inside the kit does not rise due to heat generated by the pump.The system works on 230V, AC power.
The Kit Consists Of Following :
Thermoelectric Gaseous Sampling Kit is a Gaseous sampling kit with automatic temperature control. It employs a Peltier cooling system and a thermostat for setting the desired temperature between 0 – 60 Deg C. Automatic temperature control eliminates the need of changing the cold water after every few hours for ensuring that the reagents do not evaporate due to excessive ambient heat.
It has a built-in mini vacuum pump of capacity 10LPM.
Housed in a high impact plastic assembly, this kit is extremely portable rain/dust proof. The system works on 230V, ACpower.
The Kit Consists Of Following:
Instrumex Ambient Fine Dust Sampler is designed as per USEPA guidelines for sampling of PM2.5 and PM1 0 particles in Ambient Air. The USEPA based WINS impactor separates the particles smaller than 2.5p by the principle of impaction at a regulated flow of 1 m3/hr. A critical orifice controls the flow throughout the sampling period. PM1 0 particle sampling is achieved by replacing the WINS impactor with a downtube.
Key Features
Clock / Timer System
Programmable Real Time control system with automatic start & stop Digital display of date, time & time of sampling. Accuracy ± 2 min / month.
Optional Gaseous Sampling Attachment
Thermoelectric Gaseous Sampling Kit
In-built Gaseous Sampling Kit
Instrumex Respirable Dust Sampler is a versatile dust sampler that is based on a design standardized by CPCB for collection of PM10 & Totoal Suspended Particulates (TSPM) in ambient air and also simultaneously samples the particulates having aerodynamic diameter less than 10 Micron.
Features
Instrument Overview
Instrumex Respirable Dust Sampler employs heavy duty Brushless and Noiseless blower that draws air through a size-selective inlet and through a 20.3 X 25.4 cm (8 X 10)" filter at a flow rate, which is typically between 0.9 — 1.4 m3/min maintained by an Orifice. A cyclonic flow technique is used to separate the particles with aerodynamic diameter less than the cut-point of the inlet (PM10). These are collected by the filter. The particles greater than 10 micron are separated at the bottom of the cyclone into a dust collecting bottle. The mass of PM10 particles is determined by the difference in filter weights prior to and after sampling. The concentration of PM10 in the designated size range is calculated by dividing the weight gain of the filter by the volume of air sampled.
Gaseous Sampling
Normal Gaseous Sampling Kit:
Aluminum enclosure housing an Ice tray attached at the back of the instrument with following provisions:
Thermoelectric Gaseous Sampling Kit:
In tropical weather where temperatures can soar above 35°C, the reagents in the impingers tend to evaporate quickly. This results in erroneous reporting of the Gaseous pollutants. Instrumex Thermoelectric Gaseous Sampling Kit is a separate enclosure with a Peltier cooling system that automatically maintains temperature between 10 - 15°C. Thereby completely eliminating the hassle of replacing the ice/cold water after every few hours
Optional Extras
Anti Smog Gun
A weather monitoring station is a facility with instruments and equipment for measuring atmospheric conditions to provide information for weather forecasts and to study the weather and climate. It is available with Solar Panel and Mounting Accessories. The data is stored in a 2GB MicroSD card and also transmitted over to a central server through GSM/GPRS and data from this server can be downloaded into the PC. A GPRS activated sim card is required for data Transfer to network. Data from this network is available through internet irrespective of the location of installation. All the sensor are Davis, USA make.
The Weather Monitoring Station Provides Measurement Options For
WindEx Wind Rose And Wind Trend Plotting Software
Wind Rose & Wind Trend Plotting Software is an extremely simple tool to generate Wind Rose diagrams and Wind Trend plots from the data fetched by Instrumex Weather Monitoring Station. A wind rose is a graphical tool used to show wind speed and wind direction for a particular location over a specified period of time at a specific location. To create a wind rose, average wind direction and wind speed values are logged at a site, at short intervals, over a period of time, e.g. Every 5 minutes (In case of Instrumex Weather Station), 1 Hour, 1 Day or longer. The collected wind data is then sorted by wind direction so that the percentage of time that the wind was blowing from each direction can be determined. In case of Instrumex WindEx, the wind direction data is sorted into sixteen equal arc segments, 22.5° each segment, in preparation for plotting a circular graph in which the radius of each of the twelve segments represents the percentage of time that the wind blew from each of the twelve 22.5° direction segments. Wind speed data can be superimposed on each direction segment to indicate, for example, the average wind speed when the wind was blowing from that segment's direction and the maximum wind speed during the logging period.
Gas Sample in flue gases passes through the probe, primary filtration, sampling ball valve and secondary filtration in the chassis, then reaches to measuring cell. After analysis the density and humidity of all components the sample gas will be drained through sampling pump.
By controlling sampling ball valve and back-blowing solenoid valve, the system can regularly back –blow to the probe. It can also realize the regular calibration of the analyzer by controlling and calibration solenoid valve.
Key Features
EQMS (Effluent Quality Monitoring System) technology is based on unique method FTLS UV spectroscopy which associate proprietary high resolution spectrograph with Fourier Transform & Least Square mathematical treatment. So, you can believe in our knowledgeable and responsive support team to address your unique needs for the water or air applications throughout your entire process.
Our goal for the future is to continue to provide customers with reliable instruments, proven methods, easy procedures, and outstanding technical support. We will strive to be best choice brand offering trust and assurance to our customers.
Measuring Principle
Product Training forms an integral part of our Installation & Supply. We provide in depth training for operation and maintenance of the products manufactured by us.
Apart from the Product Training, we also provide training for Laboratory operation covering following scope:
We undertake repair & maintenance of all kinds of Environmental Monitoring Instruments of any make.
Our Annual Maintenance Contracts & Comprehensive Maintenance Contracts help our clients in ensuring that the instruments are always up and running with minimal costs.
We have a team of engineers who are capable of attending on-site maintenance visits across India within 2 days of receiving service requests*.
