Liquid Coating ChambersBooths Depending on the application article to be coated, the production volume and also the space and facilities available, Intech can provide the best selection for the water wash or dry back booths in its stables, both in side draft or down draft modes.

DIP PRE-TREATMENT PLANTS Dip Pretreatment Plant In the Dip Pretreatment process, there is a sequential arrangement of the process tanks in accordance with the designed chemical process. The articles are hung onto a load bar or are put into a cage basket and are moved from one tank to another using overhead hoist arrangement with manual controls or with the help of Transporters with manual or automatic controls. The article is expected to remain inside the respective tank for the specified time as per the designed chemical process. Another alternative material handling mechanism is the use of overhead chain conveyors, which are dipped in the tanks. This alternative is mainly used for large sized, low volume articles.

SPRAY PRETREATMENT PLANTS Spray Pretreatment Plants In the Spray Pretreatment process, there is a sequential arrangement of spray zones in a tunnel according to the designed chemical process. The Tunnel is mounted on tanks of the chemicals from where the chemicals are pumped up to the spray zones and sprayed onto the articles through nozzles. Each process zone is followed by a drain zone to avoid carryover of the sprayed chemical in the next process zone. The sprayed chemical is recollected into the tanks through the funnels provided in each zone of the tunnel.

We are offering ovens ovens are used for firmly baking the layer of powderpaint onto the article surface. Convection heating is used for curing of the powder paint film. Hot air is blown over the articles thereby heating the articles. Circulation air blowers draw the cooled air over the heat exchanger or bank of electrical heaters. The heated air is passed into the hot air ducts and let out into the oven through the air directional blinds. The ovens supplied are suitable for conveyorised batch operations using following different heating systems such as electrical hsd lpg ir heaters thermic flui

Paint Kitchen System This provides the complete system for transfer & regulation of paint from paint room to applicator. For, Quick colour changeRegulates proper quality & quantity of paintCentralized fresh air unit (if required)

We offer cartridge type powder recovery system. Cartridge type this kind of recovery systems guarantees almost 100% recovery as the total over-sprayed powder gets collected on the filter cloth paper through which it is forced. This high efficiency is possible when the filters are new or thoroughly cleaned. Chocked filters drive the efficiency down to even 80% and theoretically even up to 0%. this system though is useful for single colour or single family of colours and different sets of the cartridges are recommended for different colours. Also repeated chocking and cleaning cycles deteriorate the filter cartridges and these need to be replaced in a few years

We are offering material handling systems overhead chain conveyors are the most efficient and convenient systems for material handling in any type of surface coating plants. A well designed conveyor system and its well thought over layout can enhance efficiency of any surface coating plant. Rate of production, available production space, size & weight of the article to be coated play an important role in the selection of the conveyor system.

We offer cyclone type powder recovery system. Cyclone type this kind of recovery system conventionally uses a single cyclone and makes use of the cyclonic action to separate the powder from the air and collect the powder in the collecting bin below. Cyclone cleaning is easy and therefore this system can be used for multiple colours. Traditionally the collection efficiency is in the range of 80-85%.

Liquid Coating ChambersBooths Depending on the application article to be coated, the production volume and also the space and facilities available, Intech can provide the best selection for the water wash or dry back booths in its stables, both in side draft or down draft modes.

DIP PRE-TREATMENT PLANTS Dip Pretreatment Plant In the Dip Pretreatment process, there is a sequential arrangement of the process tanks in accordance with the designed chemical process. The articles are hung onto a load bar or are put into a cage basket and are moved from one tank to another using overhead hoist arrangement with manual controls or with the help of Transporters with manual or automatic controls. The article is expected to remain inside the respective tank for the specified time as per the designed chemical process. Another alternative material handling mechanism is the use of overhead chain conveyors, which are dipped in the tanks. This alternative is mainly used for large sized, low volume articles.

SPRAY PRETREATMENT PLANTS Spray Pretreatment Plants In the Spray Pretreatment process, there is a sequential arrangement of spray zones in a tunnel according to the designed chemical process. The Tunnel is mounted on tanks of the chemicals from where the chemicals are pumped up to the spray zones and sprayed onto the articles through nozzles. Each process zone is followed by a drain zone to avoid carryover of the sprayed chemical in the next process zone. The sprayed chemical is recollected into the tanks through the funnels provided in each zone of the tunnel.

We are offering ovens ovens are used for firmly baking the layer of powderpaint onto the article surface. Convection heating is used for curing of the powder paint film. Hot air is blown over the articles thereby heating the articles. Circulation air blowers draw the cooled air over the heat exchanger or bank of electrical heaters. The heated air is passed into the hot air ducts and let out into the oven through the air directional blinds. The ovens supplied are suitable for conveyorised batch operations using following different heating systems such as electrical hsd lpg ir heaters thermic flui

Paint Kitchen System This provides the complete system for transfer & regulation of paint from paint room to applicator. For, Quick colour changeRegulates proper quality & quantity of paintCentralized fresh air unit (if required)

We offer cartridge type powder recovery system. Cartridge type this kind of recovery systems guarantees almost 100% recovery as the total over-sprayed powder gets collected on the filter cloth paper through which it is forced. This high efficiency is possible when the filters are new or thoroughly cleaned. Chocked filters drive the efficiency down to even 80% and theoretically even up to 0%. this system though is useful for single colour or single family of colours and different sets of the cartridges are recommended for different colours. Also repeated chocking and cleaning cycles deteriorate the filter cartridges and these need to be replaced in a few years

We are offering material handling systems overhead chain conveyors are the most efficient and convenient systems for material handling in any type of surface coating plants. A well designed conveyor system and its well thought over layout can enhance efficiency of any surface coating plant. Rate of production, available production space, size & weight of the article to be coated play an important role in the selection of the conveyor system.

We offer cyclone type powder recovery system. Cyclone type this kind of recovery system conventionally uses a single cyclone and makes use of the cyclonic action to separate the powder from the air and collect the powder in the collecting bin below. Cyclone cleaning is easy and therefore this system can be used for multiple colours. Traditionally the collection efficiency is in the range of 80-85%.