RUGGED, HIGH QUALITY CYLINDER USED FOR LIFTING AND PRESSING

• Aluminum bronze bearing reduces wear caused by off-center loads.
• Maximum sized springs speed piston return and increase spring life.
• Solid steel cylinder body for durability.
• Chrome plated piston rod resists wear and corrosion.
• Wide range of accessories available to thread onto piston rod, collar, or onto cylinder base.
• Base mounting holes standard on 5 through 55 ton cylinders; optional on 75 and 100 ton cylinders.
• A 3/8 NPTF female half coupler is standard.

Positive mechanical lock to support load.

Compact design for use where space is limited

POSITIVE MECHANICAL LOCK TO SUPPORT LOAD.

• Compact design for use where space is limited.
• Locking collar designed to support lifted load for extended periods of time with hydraulic pressure released.
• Integral tilt saddle standard improves performance under side load.
• Overflow port (weep hole) prevents piston from being overextended under load.
• Special coating improves corrosion and abrasion resistance.
• Cylinders come standard with hardened swivel caps reducing the effects of off-center loading Single-Acting Locking Collar Cylinders.
• Equipped with 38 NPTF female half couplers.

HIGH TONNAGE PREMIUM DESIGN FOR HIGH CYCLE LIFE.

• Perfect for bridge lifting, building reconstruction, shipyard, utility and mining equipment maintenance.
• Aluminum bronze overlay bearings provide long life, chrome plated piston rod resists corrosion.
• Load cap snaps out to expose internal piston rod threads for pulling applications; threads withstand full tonnage.
• Grooved ring pattern in load cap helps guard against load slippage.
• Each cylinder has two97963/8 NPTF female half couplers.
• Built-in safety relief valve prevents over-pressurization of the retract circuit.
• Feature mounting holes and collar threads.

Single-Acting and Double-Acting models. Spring-Return.

Ideal for confined areas from 3 1/2 (88, 9 mm) to 11 7/16 (290, 2 mm) clearance.

DEAL FOR CONFINED AREAS FROM 3 1/2 (88, 9 mm) TO 11 7/16 (290, 2 mm) CLEARANCE.

• Power Tech plated piston rods and gland nuts resist scoring and corrosion.
• Heavy duty return spring (except for double-acting models) provides fast piston return & low collapsed height.
• Coupler on 10 thru 50 ton models is angled upward 5 for added clearance.
• Grooved piston top keeps load from sliding.
• Cylinders can be dead-ended at full capacity.
• Removable carrying handles on 100 ton and 250 ton models.

ASME B30.1 10, 000 PSI/ 700 BAR

Our company is the most well-known exporter and supplier of an extensive range of Double Acting High Tonnage Hydraulic Cylinders (AY – CLRG). We hold a vast client base in Telangana region. The cylinder is equipped with numerous electric pumps and tested on number of quality parameters. It is low in height, long stroke, single acting and has a telescopic multi-rams design for wide usage. Load return can be designed as per customer requirement. Its 102 mm ground clearance enables its transportation over rail and rough terrains. We manufacture 50 and 100 capacity cylinders for the toughest of jobs.

We are one of the trusted exporters and suppliers of Single Acting High Tonnage Hydraulic Cylinders in Telangana region. The cylinder has baked enamel outside finish and plated pistons for increased corrosion protection. Its interchangeable, hardened, grooved saddles and base mounting holes for all models conform to the high industry benchmarks. The single-acting load return appliance contains plunger wipes for reducing contamination, which increases durability. Higher capacity models (1500 and 2000 ton) are available on request.

DESIGNED FOR PULLING AND TENSIONING.

• Heavy duty compression spring provides long cycle life and rapid extension of piston.
• Spring automatically extends piston rod when pump pressure is released.

ASME B30.1 10, 000 PSI/ 700 BAR

We are the leading exporters and suppliers of Single Acting Hydraulic Cylinders in Telangana region. The basic features of the appliance are its heavy duty return spring for fast retraction and its plunger wipes for reducing contamination, which in turn extends cylinder life. Its base and plungers are made from high strength alloy steel for durability. The cylinder has baked enamel finish for increased corrosion resistance. In terms of maintenance, it is very simple since its external access to fasteners requires only standard tools. Its collar threads, plunger threads, base mounting holes, CR-400 coupler and dust cap enable easy featuring on most models. The cylinder can be applied in all positions.

We are one of the most prominent exporters and suppliers of Single Acting Hollow Plunger Hydraulic Cylinders (Single FY-RCH). This single-acting spring return machine is widespread in the market for its rust resistance seamless finish and precise designs & dimensions. The appliance is nickel-plated and contains a floating center tube on models over 20 tons to increase longevity. Its collar threads enable easy fixtures and hollow plunger design allows for both pull & push forces. The cylinder has baked enamel finish for amplified corrosion resistance.