• Automatic GradeAutomatic, Semi-Automatic, Manual
• Capacity1m3/hr-1000m3/hr
• Installation ServiceYes
• Minimum Order Quantity1 Piece

The Sequencing Batch Reactor (SBR) is an activated sludge process designed to operate under non-steady state conditions. An SBR operates in a true batch mode with aeration and sludge settlement both occurring in the same tank. The major differences between SBR and conventional continuous-flow, activated sludge system is that the SBR tank carries out the functions of equalization aeration and sedimentation in a time sequence rather than in the conventional space sequence of continuous-flow systems. In addition, the SBR system can be designed with the ability to treat a wide range of influent volumes whereas the continuous system is based upon a fixed influent flowrate. Thus, there is a degree of flexibility associated with working in a time rather than in a space sequence [1]. SBRs produce sludges with good settling properties providing the influent wastewater is admitted into the aeration in a controlled manner. Controls range from a simplified float and timer based system with a PLC to a PC based SCADA system with color graphics using either flow proportional aeration or dissolved oxygen controlled aeration to reduce aeration to reduce energy consumption and enhance the selective pressures for BOD, nutrient removal, and control of filaments [1]. An appropriately designed SBR process is a unique combination of equipment and software. Working with automated control reduces the number of operator skill and attention requirement. The majority of the aeration equipment of sequencing batch reactors consist of jet, fine bubble, and coarse bubble aeration systems. The main focus of this report is a jet aerated sequencing batch reactor activated sludge system. Sequencing Batch Reactor Process Cycles The operating principles of a batch activated sludge process, or SBR, are characterized in six discrete periods: 1. Anoxic Fill 2. Aerated Fill 3. React 4. Settle 5. Decant 6. Idle.

The Ionberg is a leading provider of deionization solutions. Our water deionizers are rugged, pre-engineered, pre-assembled, standardized units that minimize expensive installation and start-up costs. We have designed our Deionization systems to maximize the efficiency and repeatability of the unit during the service and regeneration modes The Process of Deionization or Ion-exchange In the context of water purification, ion-exchange is a rapid and reversible process in which impurity ions present in the water are replaced by ions released by an ion-exchange resin. The impurity ions are taken up by the resin, which must be periodically regenerated to restore it to the original ionic form. (An ion is an atom or group of atoms with an electric charge. Positively-charged ions are called cations and are usually metals; negatively-charged ions are called anions and are usually non-metals).

We are considered as one of the most reliable Wastewater Treatment Plant Manufacturers & Exporters from India. The Wastewater Treatment Plant offered by us is an innovative plant design that is manufactured from high quality component and technologically enhanced features. This treatment plant is used for production of high quality treated water from waste water having minimum sewage, effluent and contamination & use of minimum chemicals. These Wastewater Treatment Plants are primarily used for treating, restoring as well as purifying wastewater. Apart from this, our effective wastewater treatment plant can be availed at the leading industrial prices. Range Activated Sludge Process Moving Bed Biological Reactor Membrane BioReactor Sequencing Batch Reactor Up flow Anaerobic Sludge Blanket Dissolved Air Flotation Circular Clarifier Thickener Inclined Plate Settler Tube Settler SAFF (Submerged Aerobic Fixed Film Reactor) Electrocoagulation

Simplified flow diagram for a biological wastewater treatment with a activated-sludge process. In the Bar Rack coarse solids are removed, such as sticks, rags, and other debris in untreated wastewater by interception. By use of fine screening even floatable matter and algae are removed. (p. 314) In the Grit Chamber grit is removed consisting of sand, gravel, cinders, or other heavy solid materials that have subsiding velocities or specific gravities substantially greater than those of the organic putrescible solids in wastewater. (p. 384) The Primary Clarifier is a basin where water has a certain retention time where the heavy organic solids can sediment (suspended solids). (p.384) Efficiently designed and operated primary sedimentation tanks should remove from 50 to 70 percent of the suspended solids and 25 to 40 percent of the BOD. (p.396) The influent of the aeration tank is mixed with activated sludge and in the Aeration Tank the mixed liquor is aerated. By aerating the mixed liquor the aerobic processes will be stimulated, the growth rate of bacteria will be must faster. Because the bacteria deplete the substrate, flocculation takes place. The soluble substrate becomes a solid biomass. These flocks of biomass will sediment in the Secondary Clarifier. At the end of the process the effluent water is treated to Disinfect it and make it free of disease-causing organisms.

The Ionberg offer the wide range of chemical for Cooling water for prevention of corrosion, deposition and microbiological control. System components with high temperatures on heat-transfer surfaces are most vulnerable hardness deposits, predominantly the deposit consist of calcium salts. Corrosion can occur under inorganic deposits through differential aeration and under organic deposits - microbiological-induced corrosion (MIC) - due to the acidic nature of the biological processes or where skin temperature is too high. Heat exchangers that have process leaks are susceptible to organic fouling from poor microbiological control.

The Ionberg Industrial water Softeners is a manually or Automatically operated ion exchange unit designed specially for industrial use. It is simple to operate, inexpensive to maintain and is widely used in the industry. The softener comprises Steel /FRP pressure vessels containing a bed of cation exchange resin, a regenerating system and control valves. A strongly acidic cation exchange resin in sodium form is used to exchange sodium ions for the hardness �forming calcium and magnesium ions, and thus produce soft water . At the end of each service cycle, the ion exchange resin is regenerated with sodium chloride solution, after which the units is ready for the next service cycle. For larger plants, a brine measuring tank is provided, and a separate salt saturator, preferably in concrete, is recommended for bulk storage of salt and preparation of brine. Standard equipments is available to soften water, upto a maximum flow rate of 100 m3/hr.

Tube settlers increase the settling capacity of circular clarifiers and/or rectangular sedimentation basins by reducing the vertical distance a floc particle must settle before agglomerating to form larger particles. The settlers use multiple tubular channels sloped at an angle of 60° and adjacent to each other, which combine to form an increased effective settling area. This provides for a particle settling depth that is significantly less than the settling depth of a conventional clarifier, reducing settling times. Tube settlers capture the settleable fine floc that escapes the clarification zone beneath the tube settlers and allows the larger floc to travel to the tank bottom in a more settleable form. The settler's channel collects solids into a compact mass which promotes the solids to slide down the tube Channel. Why Ionberg Tube Settlers? Tube settlers offer an inexpensive method of upgrading existing water treatment plant clarifiers and sedimentation basins to improve performance. They can also reduce the tankage/footprint required in new installations or improve the performance of existing settling basins by reducing the solids loading on downstream filters. Made of lightweight PVC, tube settlers can be easily supported with minimal structures that often incorporate the effluent trough supports. They are available in a variety of module sizes and tube lengths to fit any tank geometry, with custom design and engineering offered by the manufacturer.

Plant Tissue Culture Laboratories We are engaged in establishing Plant Tissue Culture Laboratories, complete solution projects on Turn Key Basis as well as Built to operate basis. Highly chemical resistant finishes, many built-in safety features, excellent aerodynamics, noiseless operation, imported materials makes it compete with any international brand with standards that pass the stringent performance standards. We provide and execute the installation of the following main products: Photoperiodic simulation castor rack Laminar air flow with latest ozone ionization disinfectants Heat convector great, biotech Temperature controller microclimate Humidity monitor microclimate Photoperiodic morphogen Air conditioning Ceiling insulation polyurethane Floor insulation polymer anti-conductive isolieren. Buffer Room Air curtain

Simplified flow diagram for a biological wastewater treatment with a activated-sludge process. In the Bar Rack coarse solids are removed, such as sticks, rags, and other debris in untreated wastewater by interception. By use of fine screening even floatable matter and algae are removed. (p. 314) In the Grit Chamber grit is removed consisting of sand, gravel, cinders, or other heavy solid materials that have subsiding velocities or specific gravities substantially greater than those of the organic putrescible solids in wastewater. (p. 384) The Primary Clarifier is a basin where water has a certain retention time where the heavy organic solids can sediment (suspended solids). (p.384) Efficiently designed and operated primary sedimentation tanks should remove from 50 to 70 percent of the suspended solids and 25 to 40 percent of the BOD. (p.396) The influent of the aeration tank is mixed with activated sludge and in the Aeration Tank the mixed liquor is aerated. By aerating the mixed liquor the aerobic processes will be stimulated, the growth rate of bacteria will be must faster. Because the bacteria deplete the substrate, flocculation takes place. The soluble substrate becomes a solid biomass. These flocks of biomass will sediment in the Secondary Clarifier. At the end of the process the effluent water is treated to Disinfect it and make it free of disease-causing organisms.

The Sequencing Batch Reactor (SBR) is an activated sludge process designed to operate under non-steady state conditions. An SBR operates in a true batch mode with aeration and sludge settlement both occurring in the same tank. The major differences between SBR and conventional continuous-flow, activated sludge system is that the SBR tank carries out the functions of equalization aeration and sedimentation in a time sequence rather than in the conventional space sequence of continuous-flow systems. In addition, the SBR system can be designed with the ability to treat a wide range of influent volumes whereas the continuous system is based upon a fixed influent flowrate. Thus, there is a degree of flexibility associated with working in a time rather than in a space sequence [1]. SBRs produce sludges with good settling properties providing the influent wastewater is admitted into the aeration in a controlled manner. Controls range from a simplified float and timer based system with a PLC to a PC based SCADA system with color graphics using either flow proportional aeration or dissolved oxygen controlled aeration to reduce aeration to reduce energy consumption and enhance the selective pressures for BOD, nutrient removal, and control of filaments [1]. An appropriately designed SBR process is a unique combination of equipment and software. Working with automated control reduces the number of operator skill and attention requirement. The majority of the aeration equipment of sequencing batch reactors consist of jet, fine bubble, and coarse bubble aeration systems. The main focus of this report is a jet aerated sequencing batch reactor activated sludge system. Sequencing Batch Reactor Process Cycles The operating principles of a batch activated sludge process, or SBR, are characterized in six discrete periods: 1. Anoxic Fill 2. Aerated Fill 3. React 4. Settle 5. Decant 6. Idle.

We are engaged in establishing Plant Tissue Culture Laboratories, complete solution projects on Turn Key Basis as well as Built to operate basis. Highly chemical resistant finishes, many built-in safety features, excellent aerodynamics, noiseless operation, imported materials makes it compete with any international brand with standards that pass the stringent performance standards. We provide and execute the installation of the following main products: Photoperiodic simulation castor rack Laminar air flow with latest ozone ionization disinfectants Heat convector great, biotech Temperature controller microclimate Humidity monitor microclimate Photoperiodic morphogen Air conditioning Ceiling insulation polyurethane Floor insulation polymer anti-conductive isolieren. Buffer Room Air curtain