My ExportersIndia

For Buyer

For Seller

For Help

Chemical Reactors & Process Tanks

Leading Manufacturer, Supplier & Retailer of Fluidized Bed Bio-Reactors and Sequencing Batch Reactors.

Fluidized Bed Bio-Reactors

In Fluidized Bed Reactors, cells are "immobilized" in small particles which move with the fluid. The small particles create a large surface area for cells to stick to and enable a high rate of transfer of oxygen and nutrients to the cells. The fluidized bed reactor is most suitable when a high viscosity substrate solution and a gaseous substrate or product are used in a continuous reaction system. Here also we have four phases in treatment i.e. Preliminary treatment, Primary, Secondary & Tertiary Treatment. Preliminary TreatmentIn Preliminary treatment removal of contents as Poly-ethenes, Papers, fibres, Vegetable & edible pieces, grits, Oil grease etc. by bar Screening chambers & Oil-trapping is carried out in the equalization sump. Primary TreatmentIn the next Primary Treatment stage we go for chemical treatment for adjusting ph and this chemical dosing is optional will depend on the raw water. Secondary TreatmentIn the secondary Treatment Removal of organic matters suspended solids by Biological treatment, decomposition and Clarifications are carried out with specialized attached growth biological treatment technology. Here the Biological action takes place in aeration tank , tube settlers and the clarified water is passed to chlorine contact tank. Tertiary TreatmentIn the Tertiary Treatment the water from chlorine dosing tank is allowed to settle in buffer tank. From Buffer tank the water is pumped to sand filter & carbon filters respectively. Features
  • Removes hydrocarbons and BOD/COD.
  • Uses oxygen transfer with a large protected biofilm attachment area.
  • Incorporates neutrally-buoyant Media Pac.
  • Compact
  • No/Less Civil work.
  • Low Operational cost.
  • Easy Maintenance & Operations.
  • Portability.
  • Reduced Noise.
  • Quick Installation
  • Min Sludge
View Complete Details

Sequencing Batch Reactors - 03

Automated Chemical Free SBR Waste Water Treatment Plants We also provide a advanced Pre-Fabricated Chemical Free Automated SBR Waste Water Treatment plant for domestic and municipal application. This Treatment system works on four phases Charging Phase, Treatment Phase, and Settling Phase & Removal Phase. Pretreatment Whether equipped with coarse separator or screen the coarse material is first removed. Buffer The pretreated wastewater next reaches the buffer. Here, loading peaks of a hydraulic or organic types are given intermediate storage during the activated sludge and settling stage and dosed evenly to the current cycle has ended does the filling of the current cycle has ended does the filling of the SBR stage begin. Sequence Batch Reactor Here the biological treatment takes place. In firmly defined cycle mixing (denitrification), aeration (carbon removal and nitrification) and settling take place after charging. With several lines these are filled one after the other. Following complete treatment the removal of the clarified water take place. At the end of the cycle the excess sludge is drawn off the storage tank is again ready for the acceptance of the wastewater produced in the buffer tank. Sludge Storage

  • The surplus sludge can be stored until removal regardless of whether it is in the coarse separator or in a separate sludge store.
  • A cycle can be run according to fixed times or as required. The Ionics works in normal operation at 3 cycles per day.

Features

  • Chemical Free
  • No Civil Work
  • Zero Maintenance
  • Low Power
  • Automated
  • Squash Design
  • Odor Free
  • Quick Installation
  • Portable
  • Reduced Noise
  • Min Sludge
  • No Sludge Bed Req

Phosphorus Elimination

  • Ortho- phosphate get Splitted during biological treatment process - the rest has to be coagulated.
  • Lot of substrates available (sulfates oder chlorides) with negative side effects like salination and acid reactions.
  • We use Natrium- Aluminat because:
  • Easier to handle (toxicity) no salination.
  • Reaction without sour waste products.
  • Sludge volume is not effected
  • Sludge weight raises, better settlement, reduces COD values.
View Complete Details

Sequencing Batch Reactors - 02

  • Country of Origin India

Automated Chemical Free SBR Waste Water Treatment Plants We also provide a advanced Pre-Fabricated Chemical Free Automated SBR Waste Water Treatment plant for domestic and municipal application. This Treatment system works on four phases Charging Phase, Treatment Phase, and Settling Phase & Removal Phase. Pretreatment Whether equipped with coarse separator or screen the coarse material is first removed. Buffer The pretreated wastewater next reaches the buffer. Here, loading peaks of a hydraulic or organic types are given intermediate storage during the activated sludge and settling stage and dosed evenly to the current cycle has ended does the filling of the current cycle has ended does the filling of the SBR stage begin. Sequence Batch Reactor Here the biological treatment takes place. In firmly defined cycle mixing (denitrification), aeration (carbon removal and nitrification) and settling take place after charging. With several lines these are filled one after the other. Following complete treatment the removal of the clarified water take place. At the end of the cycle the excess sludge is drawn off the storage tank is again ready for the acceptance of the wastewater produced in the buffer tank. Sludge Storage

  • The surplus sludge can be stored until removal regardless of whether it is in the coarse separator or in a separate sludge store.
  • A cycle can be run according to fixed times or as required. The Ionics works in normal operation at 3 cycles per day.

Features

  • Chemical Free
  • No Civil Work
  • Zero Maintenance
  • Low Power
  • Automated
  • Squash Design
  • Odor Free
  • Quick Installation
  • Portable
  • Reduced Noise
  • Min Sludge
  • No Sludge Bed Req

Phosphorus Elimination

  • Ortho- phosphate get Splitted during biological treatment process - the rest has to be coagulated.
  • Lot of substrates available (sulfates oder chlorides) with negative side effects like salination and acid reactions.
  • We use Natrium- Aluminat because:
  • Easier to handle (toxicity) no salination.
  • Reaction without sour waste products.
  • Sludge volume is not effected
  • Sludge weight raises, better settlement, reduces COD values.
View Complete Details

Sequencing Batch Reactors - 01

Automated Chemical Free SBR Waste Water Treatment Plants We also provide a advanced Pre-Fabricated Chemical Free Automated SBR Waste Water Treatment plant for domestic and municipal application. This Treatment system works on four phases Charging Phase, Treatment Phase, and Settling Phase & Removal Phase. Pretreatment Whether equipped with coarse separator or screen the coarse material is first removed. Buffer The pretreated wastewater next reaches the buffer. Here, loading peaks of a hydraulic or organic types are given intermediate storage during the activated sludge and settling stage and dosed evenly to the current cycle has ended does the filling of the current cycle has ended does the filling of the SBR stage begin. Sequence Batch Reactor Here the biological treatment takes place. In firmly defined cycle mixing (denitrification), aeration (carbon removal and nitrification) and settling take place after charging. With several lines these are filled one after the other. Following complete treatment the removal of the clarified water take place. At the end of the cycle the excess sludge is drawn off the storage tank is again ready for the acceptance of the wastewater produced in the buffer tank. Sludge Storage

  • The surplus sludge can be stored until removal regardless of whether it is in the coarse separator or in a separate sludge store.
  • A cycle can be run according to fixed times or as required. The Ionics works in normal operation at 3 cycles per day.

Features

  • Chemical Free
  • No Civil Work
  • Zero Maintenance
  • Low Power
  • Automated
  • Squash Design
  • Odor Free
  • Quick Installation
  • Portable
  • Reduced Noise
  • Min Sludge
  • No Sludge Bed Req

Phosphorus Elimination

  • Ortho- phosphate get Splitted during biological treatment process - the rest has to be coagulated.
  • Lot of substrates available (sulfates oder chlorides) with negative side effects like salination and acid reactions.
  • We use Natrium- Aluminat because:
  • Easier to handle (toxicity) no salination.
  • Reaction without sour waste products.
  • Sludge volume is not effected
  • Sludge weight raises, better settlement, reduces COD values.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us