Automated Chemical Free SBR Waste Water Treatment Plants We also provide a advanced Pre-Fabricated Chemical Free Automated SBR Waste Water Treatment plant for domestic and municipal application. This Treatment system works on four phases Charging Phase, Treatment Phase, and Settling Phase & Removal Phase. Pretreatment Whether equipped with coarse separator or screen the coarse material is first removed. Buffer The pretreated wastewater next reaches the buffer. Here, loading peaks of a hydraulic or organic types are given intermediate storage during the activated sludge and settling stage and dosed evenly to the current cycle has ended does the filling of the current cycle has ended does the filling of the SBR stage begin. Sequence Batch Reactor Here the biological treatment takes place. In firmly defined cycle mixing (denitrification), aeration (carbon removal and nitrification) and settling take place after charging. With several lines these are filled one after the other. Following complete treatment the removal of the clarified water take place. At the end of the cycle the excess sludge is drawn off the storage tank is again ready for the acceptance of the wastewater produced in the buffer tank. Sludge Storage

• The surplus sludge can be stored until removal regardless of whether it is in the coarse separator or in a separate sludge store.
• A cycle can be run according to fixed times or as required. The Ionics works in normal operation at 3 cycles per day.

Features

• Chemical Free
• No Civil Work
• Zero Maintenance
• Low Power
• Automated
• Squash Design
• Odor Free
• Quick Installation
• Portable
• Reduced Noise
• Min Sludge
• No Sludge Bed Req

Phosphorus Elimination

• Ortho- phosphate get Splitted during biological treatment process - the rest has to be coagulated.
• Lot of substrates available (sulfates oder chlorides) with negative side effects like salination and acid reactions.
• We use Natrium- Aluminatâ�� because:
• Easier to handle (toxicity) no salination.
• Reaction without sour waste products.
• Sludge volume is not effected
• Sludge weight raises, better settlement, reduces COD values.

Automated Chemical Free SBR Waste Water Treatment Plants We also provide a advanced Pre-Fabricated Chemical Free Automated SBR Waste Water Treatment plant for domestic and municipal application. This Treatment system works on four phases Charging Phase, Treatment Phase, and Settling Phase & Removal Phase. Pretreatment Whether equipped with coarse separator or screen the coarse material is first removed. Buffer The pretreated wastewater next reaches the buffer. Here, loading peaks of a hydraulic or organic types are given intermediate storage during the activated sludge and settling stage and dosed evenly to the current cycle has ended does the filling of the current cycle has ended does the filling of the SBR stage begin. Sequence Batch Reactor Here the biological treatment takes place. In firmly defined cycle mixing (denitrification), aeration (carbon removal and nitrification) and settling take place after charging. With several lines these are filled one after the other. Following complete treatment the removal of the clarified water take place. At the end of the cycle the excess sludge is drawn off the storage tank is again ready for the acceptance of the wastewater produced in the buffer tank. Sludge Storage

• The surplus sludge can be stored until removal regardless of whether it is in the coarse separator or in a separate sludge store.
• A cycle can be run according to fixed times or as required. The Ionics works in normal operation at 3 cycles per day.

Features

• Chemical Free
• No Civil Work
• Zero Maintenance
• Low Power
• Automated
• Squash Design
• Odor Free
• Quick Installation
• Portable
• Reduced Noise
• Min Sludge
• No Sludge Bed Req

Phosphorus Elimination

• Ortho- phosphate get Splitted during biological treatment process - the rest has to be coagulated.
• Lot of substrates available (sulfates oder chlorides) with negative side effects like salination and acid reactions.
• We use Natrium- Aluminatâ�� because:
• Easier to handle (toxicity) no salination.
• Reaction without sour waste products.
• Sludge volume is not effected
• Sludge weight raises, better settlement, reduces COD values.