Write a Review
Our Products
We offer the best product range of Bangle Pressing Dies, Bread Ingot Mold Biscuit Type, Reversible Ingot Molds with C Clamp Double Side, Diamond Wire Drawing Dies and Adjustable Ingot Mold.
Bangle pressing dies (wakiya dies) Now make patterned or "wavy" bangles and hoop earrings without the need for a hydraulic press! But can also be used in press. First create your bangle or hoop out of wire Next separate the halves of the die. Place your bangle in between the halves making sure to center it. Replace the top half of the die and give it a good solid WHACK! The solid steel die is designed so that the halves always line up perfectly. It also comes with 3 aluminum spacers to help keep your bangle centers (the spaces will get deformed during use, but that is ok). The die is 3" in diameter and 1-1/2" thick.
Gold Tool Bread Ingot Mold Biscuit Type Is Available in Different Sizes : -> Bread Ingot Mold 50 gms : Dimension in MM : 30x20x4.30, Approx Weight : 0.460 Kg. -> Bread Ingot Mold 100 gms : Dimension in MM : 44x24x6, Approx Weight : 0.660 -> Bread Ingot Mold 25, 50, 100 gms : Dimension in MM : (20x13.5x4) (30x20x4.30) (44x24x65), Approx Weight : 2 Kg. -> Bread Ingot Mold 200 gms : Dimension in MM : 75x38x12, Approx Weight : 0.700 Kg. -> Bread Ingot Mold 300 gms : Dimension in MM : 75x48x12, Approx Weight : 0.760 Kg. -> Bread Ingot Mold 500 gms : Dimension in MM : 94x48x13, Approx Weight : 1 Kg. -> Bread Ingot Mold 1 Kg : Dimension in MM : 113x48x20, Approx Weight : 1.456 Kg. -> Bread Ingot Mold 2 Kg : Dimension in MM : 90x71x43 -> Bread Ingot Mold 3 Kg : Dimension in MM : 121x91x51 -> Bread Ingot Mold 5 Kg : Dimension in MM : 150x101x41
Gold Tool Reversible Ingot Molds With C Clamp Double Side Its work with gold, silver, copper, aluminium and more!. Sturdy C-clamp holds both halves together tightly. Width of the flat stock can be varied. May be used to make flat stock or wire stock from scrap metal. Made with great precision to avoid leaking of liquid while molding. Available Sizes : -> Stand Ingot Molds With C Clamp Double Side No. 1 : Inside Dimension Approx in mm : 46x80x5, Back Side Total Groove : 4, Back Side Groove Size In mm : 2.5 To 6. -> Stand Ingot Molds With C Clamp Double Side No. 2, Inside Dimension Approx in mm : 87x170x6, Back Side Total Groove : 4, Back Side Groove Size in mm : 6 To 12. -> Stand Ingot Molds With C Clamp Double Side No. 3, Inside Dimension Approx in mm : 4, Back Side Groove Size in mm : 6 To 12.
Gold Tool Diamond Wire Drawing Dies We are a well-reputed firm that manufacture and supply an extensive range of diamond (PCD) Wire Drawing Dies. Carbide dies are frequently and successfully used in wire drawing (round & shaped), bunching, stranding, guiding, and split die applications. Typically tungsten carbide dies are used for manufacturing wire or rod, generally in highly abrasive and high carbon material areas where PCD dies are not cost effective. It is often used in short run applications where trials, testing or small lots are desired.
Product Name Size in Inch (Width x Height) Adjustable Ingot Mold 2" x 3" Adjustable Ingot Mold 2" x 4" Adjustable Ingot Mold 3" x 5" Adjustable Ingot Mold 4" x 6" Adjustable Ingot Mold 5" x 7"
Product DetailProduct Name Size in Inch (Width x Height) Adjustable Ingot Mold 2" x 3" Adjustable Ingot Mold 2" x 4" Adjustable Ingot Mold 3" x 5" Adjustable Ingot Mold 4" x 6" Adjustable Ingot Mold 5" x 7"
Mac (Ishan Exports)
SAVJIBHAI STREET, Soni Bazar, Rajkot, Gujarat - 360001, India
Share us via
