Sophisticauto

Massa, Italy

We have a dedicated quality control department to ensure the products provided to you are as per international quality management systems. Our payment terms are clear and the methods we use are practical. New customers can connect with us any time for further payment related queries and learn about our policies.

 

Induction Heater R2 800100 Meller-Tools : Hand induction heater R2 is designed for QUICK, EFFICIENT and SAFE heating of ANY metallic parts.

 

The advanteges of the tool :

• Mobility and flexibility (leight and small)
• High capacity (high load factor)
• Easy operation and multilateral
• High efficiency (even and stable heating)
• Low operation and operator training costs
• High safety
• Possibility to heat parts above 800°
• Coil isolation
• Extended live coils with 4mm strength

 

Application Areas :

• automobile
• railway
• ship construction
• manufacture
• machine construction
• car repair shops
• assembly shops
• plumbers
• heating engineers
• house hobby rooms
• Parts, that require heating:
• bolts
• rod
• profile steel
• metalic sheets
• bearings
• cases
• driving shafts
• gears
• nuts
• Tools that require heating prior to hardening, gluing, soldering, defrosting
• All applications of LPG
• All applications of autogenous burne

Inductor 3, 7 KW is a machine for heating ferrous materials with good power and efficiency. The heat is created directly within the metal to a depth of 5 mm. It brings an area of 40 x 40 x 16 mm to red-hot in 15 seconds. Lack of fire allows the operator to work close to cables, pipes or other heat-sensitive parts.Oxygen flames lead the metal surface temperature to 3, 000 degrees with inevitable change in the characteristics of the metal, induction heating instead generates the heat only in the applied point. The metal can quickly lead to very high temperatures even if 5/600 degrees are sufficient to perform the most common operations of straightening, bending, substitutions of pivots, bearings, brackets, bolts etc. Equipped with ISOLATION TRANSFORMER for a complete operator safety even under the most unfavorable and unpredictable conditions. Practical and useful applications of the inductor Removal AbsorberApplication on brake pipesRemoving suspensionStraightening or bending springsStraightening rigid axlesChassis straighteningStraightening drive shaftsStraightening rodsRemoving cast postsPreheating for weldingUnlock bolts

Defined as one of the celebrated names in the market, we are involved in offering excellent quality Induction Heater T 4000. We are supported by a well-managed and automated warehouse system wherein we store the entire lot in a secured manner. The automatic handling, storage and distribution of the goods thus become an ease.

 

Details :

• Inductor 3, 7 KW is a machine for heating ferrous materials with good power and efficiency.
• The heat is created directly within the metal to a depth of 5 mm. It brings an area of 40 x 40 x 16 mm to red-hot in 15 seconds.
• Lack of fire allows the operator to work close to cables, pipes or other heat-sensitive parts. Oxygen flames lead the metal surface temperature to 3, 000 degrees with inevitable change in the characteristics of the metal, induction heating instead generates the heat only in the applied point.
• The metal can quickly lead to very high temperatures even if 5/600 degrees are sufficient to perform the most common operations of straightening, bending, substitutions of pivots, bearings, brackets, bolts etc.
• Equipped with ISOLATION TRANSFORMER for a complete operator safety even under the most unfavorable and unpredictable conditions.

 

Practical and useful applications of the inductor

• Removal Absorber
• Application on brake pipes
• Removing suspension
• Straightening or bending springs
• Straightening rigid axles
• Chassis straightening
• Straightening drive shafts
• Straightening rods
• Removing cast posts
• Preheating for welding
• Unlock bolts<
• Unlock wheel bolts
• Unlock silencers
• Unlocking the Lambda sensor
• Unlock spherical joints
• Removing paints
• Straightening sheets
• Strenghtening steels

Inductor 3, 5 KW is a machine for heating ferrous materials with good power and efficiency. The heat is created directly within the metal to a depth of 5 mm. It brings an area of 40 x 40 x 16 mm to red-hot in a very few seconds. Lack of fire allows the operator to work close to cables, pipes or other heat-sensitive parts.Oxygen flames lead the metal surface temperature to 3, 000 degrees with inevitable change in the characteristics of the metal, induction heating instead generates the heat only in the applied point. The metal can quickly lead to very high temperatures even if 5/600 degrees are sufficient to perform the most common operations of straightening, bending, substitutions of pivots, bearings, brackets, bolts etc. Equipped with ISOLATION TRANSFORMER for a complete operator safety even under the most unfavorable and unpredictable conditions. A tool that is getting more and more popular among tire shops and workshops in general for its ease of use, for its high adaptability to every job, for its safety in work environments, for its speed solving problems. In a few words, a small investment for great benefits! Practical and useful applications of the inductor Removal AbsorberApplication on brake pipesRemoving suspensionStraightening or bending springsStraightening rigid axlesChassis straighteningStraightening drive shaftsStraightening rodsRemoving cast postsPreheating for weldingUnlock bolts

Our products are manufactured keeping in mind international quality standards. Thus, they are reliable and worth their price. We make available different payment options to suit the convenience level of the clients. We entertain both online and offline payment processing methods for the convenience of our customers.

 

Details :

• Inductor 3, 5 KW is a machine for heating ferrous materials with good power and efficiency.
• The heat is created directly within the metal to a depth of 5 mm. It brings an area of 40 x 40 x 16 mm to red-hot in a very few seconds.
• Lack of fire allows the operator to work close to cables, pipes or other heat-sensitive parts. Oxygen flames lead the metal surface temperature to 3, 000 degrees with inevitable change in the characteristics of the metal, induction heating instead generates the heat only in the applied point.
• The metal can quickly lead to very high temperatures even if 5/600 degrees are sufficient to perform the most common operations of straightening, bending, substitutions of pivots, bearings, brackets, bolts etc.
• Equipped with ISOLATION TRANSFORMER for a complete operator safety even under the most unfavorable and unpredictable conditions.
• A tool that is getting more and more popular among tire shops and workshops in general for its ease of use, for its high adaptability to every job, for its safety in work environments, for its speed solving problems. In a few words, a small investment for  great benefits!

 

Practical and useful applications of the inductor

• Removal Absorber
• Application on brake pipes
• Removing suspension
• Straightening or bending springs
• Straightening rigid axles
• Chassis straightening
• Straightening drive shafts
• Straightening rods
• Removing cast posts
• Preheating for welding
• Unlock bolts<
• Unlock wheel bolts
• Unlock silencers
• Unlocking the Lambda sensor
• Unlock spherical joints
• Removing paints
• Straightening sheets
• Strenghtening steels
• wheel alignment

Due to the capacious and well-maintained storage unit, we keep a large stock in a safe place to ensure complete safety. This unit also helps us in maintaining high quality standards. The company is deeply rooted in Massa(Italy) and is acknowledged for its fair pricing policy and professional attitude.