J.D.Industries

Surajpur, Greater Noida, Uttar Pradesh

We are offering Technical data sheetsilicone valve and packing grease composition ss 7211, is silicone based grease contains solid lubricants. Features ss 7211is non-toxic, non-oxidizing, water resistant and chemically inert grease. It exhibits excellent high and low temperature resistance and do not solidify or melt at extreme temperatures. It does not carbonize after decomposing at high temperature and also demonstrate excellent resistance to extreme weather conditions, chemicals such as mild acids and alkalis, alcohol etc. typical specifications parameters ss 7211colour translucentconsistency softservicable temperature, c -40 to 260drop point, c 260dielectric strength, kvmm > 10vol. Resistivity, 27 c. 1014 applications it is commonly used to lubricate glass stop cock, industrial valves, water taps, plastic and rubber components in automotive, household, electronics, scientific and laboratory equipment etc. They works as a seal cum lubricant on rubber o- rings and gaskets used in vacuum pumps, air filters, piston and cylinder assemblies etc. They also keep rubber articles soft and flexible during storage and use. Being non toxic they are used in the food, beverage, hospital, pharma and cosmetic industry to lubricate equipment, components, conveying systems and as an anti seize on threaded connections, where incidental food or human contact is unavoidable. shelf life ss 7211does not exhibit any significant changes in properties if stored properly in original packs for over two years. Slight hardening is considered normal and is reversible by agitation. However, warranty claims, in case of manufacturing defects is limited to one year from date of manufacturing.

We offer silicone grease.Technical data sheet silicone grease ss 7217 composition ss 7217, is silicone based grease contains solid lubricants. Features ss 7217 is non-toxic, non-oxidizing, water resistant and chemically inert grease. It exhibits excellent high and low temperature resistance and do not solidify or melt at extreme temperatures. It does not carbonize after decomposing at high temperature and also demonstrate excellent resistance to extreme weather conditions, chemicals such as mild acids and alkalis, alcohol etc. typical specifications parameters ss 7217colour translucentconsistency mediumserviceable temperature, c -40 to 260drop point, c 260dielectric strength, kvmm > 10vol. Resistivity, 27 c. 1014 applications silicone grease ss 7217 find application in many areas such as lubrication of control cables, plastic, rubber, glass and metals surfaces in consumer electronics, sanitary, laboratory glassware, toys, cameras, microscopes, automobile components etc. mould release applications of plastics, rubber and metals. Weather proofing, corrosion protection, insulation and moisture barrier applications in electronics and electrical products such as switches, connectors, insulators and battery terminals. due to its non-toxic nature silicone greases are used to lubricate food and beverage processing equipment, drinking water taps, vending machines etc.. shelf life ss 7217does not exhibit any significant changes in properties if stored properly in original packs for over two years. Slight hardening is considered normal and is reversible by agitation. However, warranty claims, in case of manufacturing defects is limited to one year from date of manufacturing.

We offer silicone high vaccum grease.Technical data sheetsilicone high vaccume grease # ss 7212compositionsilicone high vaccume grease # ss 7212 , is silicone based grease contains solid lubricants.Featuressilicone high vaccume grease # ss 7212 is non-toxic, non-oxidizing, water resistant and chemically inert grease. It exhibits excellent high and low temperature resistance and do not solidify or melt at extreme temperatures. It does not carbonize after decomposing at high temperature and also demonstrate excellent resistance to extreme weather conditions, chemicals such as mild acids and alkalis, alcohol etc.Typical specifications parameters ss 7212 colour translucentconsistency softservicable temperature, c -40 to 260drop point, c 260dielectric strength, kvmm > 10vol. Resistivity, 27 c. 1014 applications it is commonly used to lubricate glass stop cock, industrial valves, water taps, plastic and rubber components in automotive, household, electronics, scientific and laboratory equipment etc. They works as a seal cum lubricant on rubber o- rings and gaskets used in vacuum pumps, air filters, piston and cylinder assemblies etc. They also keep rubber articles soft and flexible during storage and use. Being non toxic they are used in the food, beverage, hospital, pharma and cosmetic industry to lubricate equipment, components, conveying systems and as an anti seize on threaded connections, where incidental food or human contact is unavoidable. shelf lifesilicone high vaccume grease # ss 7212does not exhibit any significant changes in properties if stored properly in original packs for over two years. Slight hardening is considered normal and is reversible by agitation. However, warranty claims, in case of manufacturing defects is limited to one year from date of manufacturing.

We offer Hinge Grease.HINGE GREASES COMPOSITION Hinge greases are composed of semi-synthetic oils and solid lubricants. FEATURES Hinge greases are generally stiff, tacky, non-drying and non-evaporating, highly viscous gels, which are designed to damp free motion of the hinge to which it is applied. DESCRIPTION Ordinary lubricants have the property of reducing friction between the surfaces on which it is applied, where as hinge grease create more friction and make motion more smooth and restricted. This smooth yet restricted or damped motion is free from play and produces a hydraulic feel. TECHNICAL SPECIFICATIONS Parameters Supersol7275 Supersol 7276Colour Light straw Light strawServiceable temp.C -10C to 180C -10C to 180CPenetration, Un worked as per IS 1448 165 to 170 150 to 155Weight Loss%, (150C2hrs) None NoneDrop point, C None NoneMelting Point C Softness at 140C Softening Softening APPLICATIONS Due to this unique property, hinge greases find application in the assembly of all types Brass hinges, Stainless Steel hinges and M.S hinges where damping of free motion is required. It gives a smooth and easy motion to hinges. SHELF LIFE These greases do not exhibit any significant changes in properties if stored properly in original packs for over two years. Slight hardening of some grades is considered normal and is reversible by agitation. However, warranty claims, in case of manufacturing defects is limited to one year from date of manufacturing.

We offer Assembly Paste.Assembly Paste # SS 7101 COMPOSITIONAssembly Paste # SS 7101 contains high concentration of Molybdenum disulphide, Mineral oil, lithium soaps & other specialty solid lubricants. FEATURES Assembly Paste # SS 7101are designed to prevent damage to surfaces while sliding against each other at high loads and low speed such as assembly or disassembly of bearings, press fitting etc. It provides closer fits without jamming and lowers the force required during assembly of close or tight fitting parts. Its special lubricating properties provide lubrication up to the yield point of most metals. DESCRIPTIONThe excellent lubricating properties of ASSEMBLY PASTE are due to the hexagonal structure of its constituent, Molybdenum disulphide, which has alternate layers of molybdenum and sulphur atoms. When an assembly paste is applied to metal surfaces, the Molybdenum disulphide in the paste makes layers on the metal surface known as lamellae. These lamellae are practically incompressible and thus are capable of withstanding tremendous load. Although the lamellae cannot be compressed, they do not resist shear forces (sliding friction). Infact they provide excellent lubrication due to their ability to slide over each other without any resistance. Layers formed by this paste of metal surfaces are serviceable from - 25 C to 550 C. Having extremely low coefficient of friction; it protects components, during critical wear in damages, from fretting, seizure and galling. It handles extreme pressures and gives complete protection during critical start up and running in period.

Formulated using the latest techniques under the supervision of experts, our Silicone Free Spray is 100% safe to use. We are one of the prominent Manufacturers, Exporters and Suppliers of Silicone Free Spray from Uttar Pradesh, India. We conduct stringent quality tests on Silicone Free Spray so as to ensure that only the well-tested product reaches the customers’ end. It can be obtained from us at a very reasonable price.

Technical specifications :

• Special features based on non-silicone ingredients
  • Actives organic actives
  • Propellant hydrocarbon
  • Solvent hydrocarbon
  • Net content 250g

 
 Applications : Used as a release agent in the injection moulding of plastic and rubber.Used where the moulded articles are required to be painted or printed.Does not hamper adhesion of glues, paints, etc. to the moulded articles.

Caution : This is a pressurized aerosol can. Do not punctured, heat or incinerate. Store away from sunlight and other heat sources. Do not spray on flame or heat sources. Do not store above 50 ½^oC. Use in a well-ventilated area and avoid excessive inhalation, eye or skin contact. 
Shelf Life : The Cans should normally be used with in twelve months from date of manufacture. 
Packing : 25can of 250 gm. each are packed in one corrugated box.

Our SS 4499 is so much efficient that if it is once applied to the welding torch nozzles and the surface, it can facilitate the easy removal of molten metal particles as and when they are likely to fall. Our Anti Spatter Spray comes with excellent release property having non-toxic nature. As far as the cost is concerned, it is offered by us at market-leading prices. We are a credible Manufacturer, Supplier and Exporter of Anti Spatter Spray in Uttar Pradesh, India.

 

Supersol® range of anti-spatter agents are used to prevent adhesion of unwanted spatter, to the torch or substrate, generated in welding processes, especially by CO2, TIG and MIG. These anti-spatter agents are helpful in reducing the unnecessary labor costs involved removal of spatter and improving the finish of the welded article. Four types of industrial anti-spatter agents are available i.e. Supersol ® silicone and silicone free sprays and Supersol ® anti-spatter gels & anti-spatter fluids. The anti spatter gels and anti-spatter fluids are non flammable, non toxic and do not generate smoke.

Technical specifications :

• Actives Silicone
• Propellant hydrocarbon
• Solvent chlorinated
• Net content 350g

 
Properties :

• Excellent Anti Stick / Release property.
• Wide temperature serviceability, -40^oC to 200^oC Resistance to moisture, humidity and corrosion.
• Non toxic in nature

 
Caution : This is a pressurized aerosol can. Do not punctured, heat or incinerate. Store away from sunlight and other heat sources. Do not spray on flame or heat sources. Do not store above 50 ^oC.Use in a well-ventilated area and avoid excessive inhalation, eye or skin contact. 
Shelf Life : The Cane should normally be used with in twelve months from date of manufacture. 
Packing : 25can of 250 gm. each are packed in one corrugated box.

Our company is distinguished Manufacturer, Exporter & Supplier of Silicone Heat Sink Grease from Uttar Pradesh, India. The grease is accurately formulated using high-grade materials and the latest methods in our fully equipped facility. We are proficient in prompt delivery of Silicone Heat Sink Grease in retail or bulk quantities across the globe.

 

Silicone Heat Sink Grease #SS 7107 : Silicone heat sink grease #SS 7107  is a non-curing, water resistant paste heavily filled with heat conductive metallic oxides in a Silicone base. It is used for maintaining a positive heat-sink seal that improves heat transfer from the electrical/electronic component/device to the heat sink or chassis, there by increasing the overall efficiency of the component/device.

 

Product Features :

• Capable of high thermal conductivity
• Bleed resistant, non-drying, non-melt and non-curing in nature.
• Heat - resistant up 2000* C.

Technical Specifications :

• Colour & Appearance : Milky White paste
• Bleed, percent after 24 hrs @ 2000C : < 0.1
• Evaporation, percent after 24 hrs @ 2000C : < 5
• Specific Gravity @250C : 2.3
• Thermal Conductivity, k factor, cal / cm2 / 0c / sec. / cm : 0.0010
• Electric Strength at 50mils : 450
• Arc Resistance, Seconds : 120

Dielectric Constant

• @ 100 HZ : 4.9
• @ 1000 HZ : 4.9

Dissipation Factor

• @ 100 HZ : 0.0050
• @ 1000 HZ : 0.0010
• Volume Resistivity (Ohms-cm) : 2.0 x 1015

Applications : Generally used as a thermal coupling of electrical / electronic devices to heat sinks such as base or mounting studs of transistors, diodes and rectifiers.Led lights also.Also used as a non-flammable coating for fly back transformer connections in TV chassis and similar applications.

 

Packing and Shelf Life : Silicone heat sink grease #SS 7107  is available in 1 Kg Packs. The recommended usage period is 12 months from the date of manufacture.

We endeavor to proffer the Tyre Guard Polish that is perfect for darkening, shining and increasing the productive life of tyres, vinyl and rubber parts. This advance formula is prepared using the premium silicones and solvents as per the best applicable standards. Global clients can place with us medium or bulk orders for Tyre Guard Polish at most reasonable prices. We guarantee to execute timely deliveries.

 

 

Direction for use : Apply tyre guard to clean & dry surface uniformly and wipe excess quantity with soft cotton cloth.

 

Packing : Available in box of 20 bottles, 200ml each.

 

We are a leading Manufacturer, Exporter & Supplier of excellent assortment of Silicone Spray that is sternly manufactured by the experts and professionals. Supersol TM, high performance silicone sprays are the largest selling mould release and lubricant spray in India that are free from CFCs and based on eco friendly hydrocarbon aerosol propellant. The offere Silicone Spray is manufactured as per ASTM D 3091-72R03 norms and comply with RoHS and other international norms.

Features :

• Excellent Anti Stick / Release property.
• Resistance to moisture, humidity and corrosion.
• Wide temperature serviceability, -40½^oC to 200½^oC.
• Non toxic in nature

 
Technical specifications :

• Actives Silicone
• Solvent hydrocarbon
• Propellant hydrocarbon
• Flammability High
• Net content 250gm

 
Applications :

• Clean release of plastic and rubber moulded articles from dies & moulds.
• Imparting shine and gloss to dashboards of Cars, TV Cabinets, Painted furniture etc.
• As general lubrication.

 
Caution : This is a pressurized aerosol can. Do not punctured, heat or incinerate. Store away from sunlight and other heat sources. Do not spray on flame or heat sources. Do not store above 50 ½^oC. Use in a well-ventilated area and avoid excessive inhalation, eye or skin contact. 
Shelf Life : The Cans should normally be used with in twelve months from date of manufacture. 
Packing : 25can of 250 gm. each are packed in one corrugated box.

 

Details:

• High performance silicone free sprays are:
• The largest selling mould release and lubricant spray in India.
• Free from CFCs and based on Eco friendly Hydrocarbon Aerosol Propellant.
• Manufactured as per ASTM D 3091-72R03 norms
• Comply with RoHS and other international norms.
• Food grade, non-toxic grades available

we offer Mould Release Spray. SILICONE SPRAY Item code SS 8080 FEATURES Excellent Anti Stick Release property.Resistance to moisture, humidity and corrosion.Wide temperature serviceability, -40C to 200C. Non toxic in nature TECHNICAL SPECIFICATIONS Actives SiliconeSolvent hydrocarbonPropellant hydrocarbonFlammability HighNet content 250gm APPLICATIONS Clean release of plastic and rubber moulded articles from dies & moulds.Imparting shine and gloss to dashboards of Cars, TV Cabinets, Painted furniture etc.As general lubrication. CAUTION This is a pressurized aerosol can. Do not punctured, heat or incinerate. Store away from sunlight and other heat sources. Do not spray on flame or heat sources. Do not store above 50 C. Use in a well-ventilated area and avoid excessive inhalation, eye or skin contact. SHELF LIFE The Cans should normally be used with in twelve months from date of manufacture. PACKING 25can of 250 gm. each are packed in one corrugated box.