Post Buy Requirement
JK
Gandhinagar, Gujarat, India
Add Review

Pressure Filter #5593367

Plate And Frame Type Filter Press

Plate & Frame Type Filter Press is suitable for Kieselguhr / Sheet Filter for Coarse, polishing and Sterilizing filtration duties.

Filter Press constitutes of Fixed, Moving and Rocket body all of which are cladded with stainless steel sheets. All the joints are welded. The Fixed and Rocket body are connected with pipes, forming a self supporting chasis. Filter Plates, Frames and Moving body are Guided on chasis pipes.

With the Aid of change over plate, filter press can be divided in two sections for two Stage filtration.

Application :

  • Filtration of Sugar Syrup based liquid.
  • Kieselguhr Filtration.
  • Filtration of thin liquid.
  • Retention of solids/ Carbon.
View Complete Details

Horizontal Plate Type Filter Press

Operation :

The unfiltered liquid is fed into the filter under positive pressure, where liquid travels in downwards direction and finds its way through opening on sides of the Filter Plates.As the liquid pressure increases, the Filter media holds the foreign particles and allows only clear filtrate to pass through the central channel formed by interlocking pressure cups to the outlet. Filtration is continued until the cake holding capacity of the unit is reached or until the filtrate rate becomes too slow owing to cake resistance.

Features :

  • Horizontal Plate Filter Press is enclosed construction, preventing evaporation, oxidation, leakage and fumes escaping from product.

  • Filter plates are available in two sizes. Deep plate for large percentage of cake holding capacity and Shallow plate for small percentage of cake holding capacity.

  • The horizontal filter plate and even thickness of cake, prevents the cake dropping as well as cracking, thus assuring better filtrate quality.

  • The Filtration area and cake holding capacity can be increased or decreased according to requirement.

View Complete Details

Zero Hold Up Filter Press

The Cartridge assembly consists of plates, perforated screens, spacers and fitter media. Interlocking spacers internally form single pipeline. The unfiltered liquid is centrally fed under pressure from bottom inlet. The liquids spreads out equally on each plate fitted with filter media. Solids remain on filter media and clear. filtrate flows through precisely made holes on sides of plates and collects in the shell, which then comes out through the outlet. In this process, solids are evenly distributed on each plate. The cake is then cleaned from the filter material and used again for filtration process.

  • Single pass filtration with no solid bypass

  • Full batch recovery, no separate scavenging system needed.

  • Proper sealing which allows the filtration of volatile, toxic and inflammable products.

  • Plate pack arrangement ensures :Any type of filtering media singularly or in combination, can be used to achieve required micron efficiency.Easy removal and cleaning of the Cartridge Assembly.

  • Closed System ensures :Filtration of toxic, hazardous, explosive materials.Efficiently cleaned and sterilized.

  • Central feeding ensures :No solid inside the vessel, complete recovery of liquids.Cake solids can be maximum dried with N2Complete cake retains over the plate.Uniform filter-aid bed can be formed.Reduces the cost of expensive solvents.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us