J.Rosales PVT LTD

Metro Side, Mumbai, Maharashtra

Smooth bore, mandrel built, Nitrile lining to convey all grades of petroleum products, including crude oils and other liquid petroleum products having a maximum aromatics content of 40% (For 100% aromatic content a Viton lining is available).REINFORCEMENT Fabric to reinforced lining, with multiple plies of synthetic cord fabric surrounding embedded high tensile steel wire helix. Hoses are supplied electrically continuous unless specifically requested to be electrically discontinuous.Smooth, Polychloroprene (Neoprene) rubber compounded to resist abrasion, weathering and oil.

LININGSmooth bore, mandrel built, Nitrile lining to convey all grades of petroleum products, including crude oils and other liquid petroleum products having a maximum aromatics content of 40% (For 100% aromatic content a Viton lining is available). REINFORCEMENTFabric to reinforced lining, with multiple plies of synthetic cord fabric surrounding embedded high tensile steel wire helix.Hoses are supplied electrically continuous unless specifically requested to be electrically discontinuous. COVERSmooth, Polychloroprene (Neoprene) rubber compounded to resist abrasion, weathering and oil. WORKING PRESSURE VACUUMA 600 7 bar -0.85 BARA 501 10 BAR -0.85 BARA 602 15 BAR -0.85 BAR SAFETY FACTOR2 : 1 SIZES :2" (50mm nominal) 12" (300mm nominal). Lengths up to 19.5mtrs. TEMPERATURE RANGE: - 20C TO + 82C.

Smooth bore, mandrel built, Nitrile lining to convey all grades of petroleum products, including crude oils and other liquid petroleum products having a maximum aromatics content of 40% (For 100% aromatic content a Viton lining is available).Fabric to reinforced lining, with multiple plies of synthetic cord fabric surrounding embedded high tensile steel wire helix.

Application	Suitable for general purpose air & water application in industries & irrigation.
Lining	Natural & Synthetic Rubber blend.
Cover	Natural Rubber with good ageing properties.
Reinforcement	Synthetic yarn with high level of retentivity.
Temp. Range	40C to + 80C
Working Pressure	12 bar
Safety Factor	4 times working pressure

Suitable for general purpose air & water application in industries & irrigation.Lining : Natural & Synthetic Rubber blend.Cover : Natural Rubber with good ageing properties. Reinforcement: Synthetic yarn with high level of retentivity.

Suitable for pneumatic tools in process industry & and any compressed air application.Lining : Natural & Synthetic Rubber blend.Cover : Natural Rubber with good ageing & abrasion resistance. Reinforcement: Synthetic Yarn with high level of retentivity.

PTFE Smooth tube externally SS 304 braided, Temperature : -73 deg C to 260 deg C, Resistant to : Weather Ageing Diffusion , Transfer of aggressive chemical such as weak acids, chlorine, Acetyl Chloride, Ammonium Nitrate, Oleum and Molten Sulphu

Construction	PTFE corrugated tube externally SS 304 braided
Temperature	-73 deg C to 260 deg C
Resistant to	Weather / Ageing/ Diffusion
Size range	3/16" upto 6" dia
Application	Transfer of aggressive chemical such as weak acids, chlorine, Acetyl Chloride, Ammonium Nitrate, Oleum and Molten Sulphur

CavMac offer a range of hose assemblies which are specifically designed for use in roof drain systems for storage tanks with floating type roofs. The hose assemblies are supplied fitted with internal ballast weights and are designed to achieve neutral buoyancy in the liquid as the level of the roof changes. Clamping fixtures and support chains are supplied as part of the complete assembly which is shipped ready for installation. CavMac offers alternative options for use with hydrocarbons with up to 50% aromatics and for liquids with up to 100% aromatics. The hose assemblies are also available with alternative end fixings such as built in or swaged type to suit customer preference. Roof Drain Hose Systems: 50% Aromatics - Nitrile Cover CavMac offers a range of hose assemblies for drainage of rainwater from floating roof storage tanks containing hydrocarbons with aromatics contents up to 50%. The outer cover of the hose which is in contact with the fluid is manufactured using a blend of NBR rubber which has been developed to resist chemical attack and to resist mechanical damage caused by movement during operation or by handling during installation. The hose assemblies are pre fitted with a lead ballast weight in the bore of the hose which is designed to create neutral buoyancy. End connections can be built in (vulcanized) or swaged depending on customer specification. Hoses assemblies are available with internal diameter up to 6" and lengths up to 51m. Each assembly is supplied complete with a support chain, clamps and shackles. Roof Drain Hose Systems: 100% Aromatics - Viton Cover avMac offers a range of hose assemblies for drainage of rainwater from floating roof storage tanks containing hydrocarbons with aromatics contents up to 100%. The outer cover of the hose which is in contact with the fluid is manufactured using a blend of VITON fluoroelastomer which has been developed to resist chemical attack and to resist mechanical damage caused by movement during operation or by handling during installation. The hose assemblies are pre fitted with a lead ballast weight in the bore of the hose which is designed to create neutral buoyancy. End connections can be built in (vulcanized) or swaged depending on customer specification. Hoses assemblies are available with internal diameter up to 6" and lengths up to 51m Each assembly is supplied complete with a support chain, clamps and shackles.

Composite hoses are customized hoses designed for a particular application as per clients needs. The construction of this hose; an inner and outer wire helix that holds various multiple plies of composite material such as polypropylene, PTFE etc and externally covered with polyvinyl chloride woven polyethylene tetraphthalate polyester fabric with spiral spring to prevent collapse.

Composite hoses are customized hoses designed for a particular application as per clients needs. The construction of this hose; an inner and outer wire helix that holds various multiple plies of composite material such as polypropylene, PTFE etc and externally covered with polyvinyl chloride woven polyethylene tetraphthalate polyester fabric with spiral spring to prevent collapse.

ContiTech rubber industrial Kft. is a leading developer andmanufacturer of rubber hoses for various applications. Thecompany is recognized world-wide as an innovative designer andmanufacturer of high quality and technically advanced highpressure hoses. Over the decades the company has achieved manynew developments in the field of manufacturing technology andproduct quality

Flexible tubing, single thickwall corrugation, without packing, annular corugation hydraulically formed.Upto 150 kgcm or higher against specific requirement. The pressure value indicated in the table (technical data) is fuction of the diameter, of the temperature, of the number of braids, of the material used and of the type of application.

Flexible tubing, single thickwall corrugation, without packing, annular corugation hydraulically formed. Upto 150 kgcm or higher against specific requirement. The pressure value indicated in the table (technical data) is fuction of the diameter, of the temperature, of the number of braids, of the material used and of the type of application. Due to their outstanding characteristics, JRES.S. 1W & JRES.S. 2W hose assemblies are suitable for a wide variety of applications. Wherever flexible pipe is necessary they may be applied

Special Hoses available on request:

• Extra High Pressure
• Smooth Bore
• Jacketed hose Assembly

Application:The main application of Stainless Steel Corrugated hose assemblies is where synthetic rubber hoses & plastic hoses do not work well i.e. for hot water, steam, condensate, gas, corrosive liquids, acids, ammonia, carbonic & tartaric acids, tannic acid, nitric acid, sulphuric acid, dye stuff, mercury etc. In refineries: To convey oils; gasoline, LPG, benzol, petrol, alcohol, LSHS, liquid gases, steam, and other derivates In Chemical Industry: For the changing, mixing & Conveyerlines In power Plants: For cooling lines etc. In Reactor Installation: For cooling lines etc. In steel Plants: For supply of air and oxygen and for blast furnaces. And everywhere: Where corrosion and vacuum are major problems.

Hose Standard	BS 6501
Construction	Flexible tubing, single thickwall corrugation, without packing, annular corugation hydraulically formed.
Profile	Close pitch corrugation
Size Range	6 mm upto 350 mm
Pressure Range	Upto 150 kg/cm or higher against specific requirement. The pressure value indicated in the table (technical data) is fuction of the diameter, of the temperature, Of the number of braids, of the material used and of the type of
Temperature	Upto 800C
Core Material	321/304/316/316L * Monel/Bronze.
Braid Material	SS 304/SS 321
End Fittings	Tig welded, mechanical, soldered, silver brazed.
Application	Due to their outstanding characteristics, JRE/S.S. 1W & JRE/S.S. 2W hose assemblies are suitable for a wide variety of applications. Wherever flexible pipe is necessary they may be applied.