Ambala, Haryana, India GST : 06AADCJ9848D1ZE
Our Product / Services
We are leaders in the market for providing best range of Liquid Limit Apparatus, Soil Humidity Apparatus, Swell Test Apparatus, Soil Permeability Apparatus and Sand Equivalent Value Test Apparatus
Features The Liquid Limit Apparatus Is Used To Determine The Liquid Limit Of The Soil, To Classify The Soil, And To Provide Soil Consistency And Plastic Index Needed In Design & Construction It Contains A Brass Pan, Used To Accommodate Soil Specimens, A Base Made From Vulcanite, An Impacting Device, A Calculator And A Groove Handler Simple Operation Makes It Very Easy To Handle Specifications Electric Motor As Power Falling Frequency Of The Disc. : 120 Hit / Min In Fall Frequency Of The Disc. : 120 Strikes / Min Embedded A Strike Counter
Technical Specifications : Diameter of floatation balance : 3 Ã¢ï¿½ï¿½ 5 cm ( neck tube ) Volume of cutting ring : 150 Ã¢ï¿½ï¿½ 250 cm3 Gravity of the soil to be tested : 2.60 Ã¢ï¿½ï¿½ 2.70g/cm2 Range of humidity unit weight of scale plate : 1.2 Ã¢ï¿½ï¿½ 2.2 g/cm3 Range of dry unit weight of scale plate : 1.0 Ã¢ï¿½ï¿½ 2.2 g/cm3
Swell Test Apparatus 1. One loading unit Hand. operated 5000 kg capacity with two rates of travel 2. One Gun metal mould, 100mm dia x 127.3 cm height X 1000 cc volume with base plate & collar 3. One perforated swell plate 100mm dia X 16mm thick 4. One spacer 100mm dia X 12.7mm thick 5. Two porous stone of 100mm dia X 12.7mm thick 6. One load transfer bar 7. One steel ball & one soaking tank, 250mm dia x 210mm high 8. Dial gauge 0.01mm X 25mm travel 9. Proving ring of 2.5 KN capacity with calibration chart and carrying case.
Our Permeability Test Apparatus controls the rate of settlement of saturated compressible soil layers and the rate of flow of aquifer. As permeability depends on various factors, the accurate measurement can be carried out with the use of apparatus called permeameter. Our product is used for testing remoulded or undisturbed fine grained soil that has a maximum particle size of 10mm.
Sand Equivalent Value Test Apparatus 4 Plastic Measuring cylinders 1 Carrying case 1 Weighted foot assembly 1 Irrigator tube 1 Rubber tubing complete with pinch clip 1 Syphon assembly, with 5 litre polythene bottle 1 Funnel Accessories a) Syphon Assembly, with 5 litre polythene bottle required. Supplied without rubber tubing b) Calcium Chloride 2.5 kg c) Formaldehyde, 40% solution, 2.5 litres d) Glycerol Analar 2.5 kg
Relative Density Apparatus For meeting the huge market demand and requirements of customers, we are providing an extensive range of Relative Density Test Apparatus. The equipment is used for the determination of the relative density of cohesion less free draining soils and meets the essential requirements. Moreover low maintenance is required in this Relative Density Test Apparatus. Specification: The equipment consists one each of: Vibratory table, with a cushioned steel vibrating decks about 75cm x 75cm. It has a frequency of approximately 3600 vibratory table, minute under a 11.5kg load. Amplitude is variable in between 0.65mm in step of 0.05 to 0.25mm, 0.25 to 0.45 mm and 0.45 to 0.65mm. It is Suitable for operations on 415V, Three Phase supply, cylindrical metal unit weight mould, 3000ml. Capacity, Guide sleeve with clamp assembly, Surcharges base plate for mould, Handle for surcharge base plate, Surcharge weight. The total weight together with surcharge base plate and handle is equipment to 140 kg./sq. cm. for mould. Cylindrical metal unit weight moulds 15000 ml. capacities. (Total weight together with the above mould & surcharge weight is equivalent to 140 kg./sq. cm) dial gauge 0.01mm x 50mm travel. Extension piece 25mm for dial gauge.
Proctor Compaction Apparatus 1000 CC :- It will be made of Mild steel having capacity of 1000 cc with an internal diameter of 100 + 0.1 mm and an internal effective height of 127.3 cm + 0.1 mm. The mould will be fitted with a detachable base plate and removable extension collar approximately 60 mm high. The internal surface of the mould will be smooth. Light Rammer:- 2.6 Kg x 310 mm fall. A metal chrome plated rammer having 50 mm dia. Circular and weighing 2.6 kg. The rammer will be equipped with a suitable arrangement for controlling the drop to the specified height of 310 mm. 2250 cc:-It will be made of Mild steel having capacity of 2250 c.c with an internal diameter of 150 + 0.1 mm and an internal effective height of 127.3 cm + 0.1 mm. The mould will be fitted with a detachable base plate and removable extension collar approximately 60 mm high. The internal surface of the mould will be smooth. Heavy Rammer:-4.89 Kg x 450 mm fall. A metal chrome plated rammer having 50 mm dia. Circular and weighing 4.89kg. The rammer will be equipped with a suitable arrangement for controlling the drop to the specified height of 450 mm.
Hand operated Hydraulic jack with pressure gauge capacity 50 tonne with 5 meter long metal tube with end coupling Ã¢ï¿½ï¿½ 1 No. Ball and Socket arrangtement, consisting of two steel plate with one steel ball in between them.- 1 Set. Extension rod, 12 mm dia X 25 mm long for taking dial gauge reading. Ã¢ï¿½ï¿½ 16 Nos. Magnetic base with female thread on top for holding extension rod. Ã¢ï¿½ï¿½ 4 Nos. Top end plate, 50 mm dia male thread for fitting on the extension rod. Ã¢ï¿½ï¿½ 4 Nos. Column 15 cm dia x 50 cm long with flanges complete with four bolts and nuts. 1 Nos. Column 15 cms dia and 50 cms long with flanges complete with 4 bolts & nuts 1 No. Datum bar, light weight, portable, total span 5 meter, height approx 30cms mounted on two removable legs, made of 2 parts Ã¢ï¿½ï¿½ 1 No.
Volume Change Apparatus The instrument is used for determining the volume change of cement concrete. Specification : The apparatus comprises of one mould effective gauge length complete with base plate, four reference pins, one length comparator frame, one stainless reference bar with insulated grip, and one dial gauge, 0.002mm x 10mm
Features : Meet GB/T1346, ASTM C187, ISO 9597 The apparatus is used to determine water content requirement of normal cement consistency, setting time and the soundness of Portland cement For Determination Of Normal Consistency Of Hydraulic Cement, Gypsum Plaster And Lime Setting Time Of Cement, Gypsum Plaster And Gypsum Concrete Technical Specifications : Complete with one each of mould, glass plate, Initial needle, final needle and consistency plunger. Sturdy steel Base plate, adjustable height main axis. A Frame With A Vertically Moving Bearing Rod Mould In The Form Of Frustum Of A Cone 70 Mm Bottom Dia. 60 Mm Top Dia. And 40 Mm High With Base Plate Needle 1 Mm Dia. X 50 Mm Long Plunger 10 Mm Dia. X 50 Mm Long Plunger 19 Mm Dia. X 44.4 Mm Long Plunger 12.5 Mm Dia. X 25 Mm Long One Brass Weight
This instrument is used for determining the normal consistency and setting times of cement and Ã¢ï¿½ï¿½AÃ¢ï¿½ï¿½ Class limes. but in addition is fitted with a dash pos which facilitates gentle lovering of needles. Salient Features Accessories : Mild steel base plate 5 inches x 5 inches. Fulcrum mould, brass, 70mm 1.0 base dia x 60mm I.D. top dia, 40mm height.
The apparatus provided comprehensive unit to perform the vibration experiments. A universal frame is provided upon which quick and easy assembly of various experiments can be done. The unit is self-contained to safely store spares. The students can easily assemble the experiments and study the theory of vibrations practically.
This equipment is designed for carrying out the experiment for balancing a rotation mass system. The apparatus consists of a stainless steel shaft fixed in a rectangular frame. A set of four blocks with a clamping arrangement is provided. For static balancing, each block is individually clamped on shaft and its relative weight is found out using cord and container system in terms of number of steel balls. For dynamic balancing, a moment polygon is drawn using relative weights and angular and axial position of blocks is determined. The block are clamped on shaft is rotated by a motor to check dynamic balance of the system. The system is provided with angular and longitudinal scales and is suspended with chains for dynamic balancing.
The apparatus consists of a pad, which can be tilted to the required angle. An endless belt, which moves beneath the pad, carries the oil over its surface from oil bath. When the pad is tilted over the oil film, pressure is developed, the pad is provided with pressure tapings parallel and perpendicular to belt direction. The pressure distribution is measured over a multi tube manometer. The belt is driven by a variable speed motor. The tilting angle and minimum gap between pad and belt can be adjusted and characteristics thus can be studied at various gaps, inclination and relative surface speeds.
Horizontal bench pattern. The wheelmoving on ball bearing is providedwith a chuck to hold the rod undertest. The other end of the rod isclamped tightly to bracked. Thepoints and scales are gradually in single degree and can beclamped at any position. Complete with ribbon, hook androds of steel and brass, but without weights..
Packed in sturdy storage case. This experiment attempted to demonstrate that mechanical waves undergo interference phenomena. The following components needed to do Melde’s experiments: Standing waves Electrical Resonator Holder Pulley Cords Weights Pan The resonator and the pulley can be fixed on the holder. Suitable Power supply. Instructional manual.
Comprises a cobalt steel magnetic needle, about 75mm long, with agate bearing supported on pivot mounted on insulated pillar on base and surrounded by a rectangular frame of non-magnetic metal strip.
Excellent apparatus to study the Gas Law. Very easy to study and demonstrate the relationship between the pressure, temperature, and volume of a gas that is constant. The volume of the air can be easily changed by turning the piston and the pressure and themperature can be noted from the gauges. By repeating the process, the law can be confirmed. The whole unit mounted on a sturdy metal base 6.25inch(160mm) x 4.75inch(120mm) x 1.25inch(30mm). Total height with piston at the top 11.5inch(290mm). Piston barrel size 4.25inch(110mm) x 1.25inch(32mm) dia. Pressure gauge dia. 2"(50mm), reading -1000 to 3000 hPa. Requires one AA battery for digital thermometer, not supplied. Instruction Manual Included A preview of the included instructions can be found at the bottom of this listing. Measurements are approximate.
Hoffman electrolysis apparatus with platinum and carbon electrodes. Platinum electrodes are used for electrolysis of water and carbon electrodes for the electrolysis of of ammonia or hydrochloric acid. For qualitative and quantitative measurement of the effect of electric current on liquid. ⦁ the glass unit has two connected limbs, graduated to 60ml capacity, integral with reservoir tube and funnel shaped bulb, with a stopcock at the top of each limb. The lower part of the limb accepts the electrodes. Overall length of glass part 55cm. ⦁ complete with items below: # 2017-20 hoffman electrolysis apparatus with electrodes - 1 set # 3351-2 support stand 8 inch x 5 inch, with rod 20 inch - 1 set # 3380-1 swivel utility clamps - 2 # 3410-18 clamp 3 finger swivel - 1 # 2037-3 power supply # 1602-14 pair of alligator clip leads instructions are included. Measurements are approximate.
The most popular form of Electrolysis Apparatus. Consists of Electrodes attached to insulated connecting rods which are in-turn connected to terminals, mounted on a non-conducting plastic holder, designed to rest on top of a glass jar beaker. ⦁ The plastic holder has clips to hold two test tubes. Operates on 6 - 10v DC, power supply not included. ⦁ Supplied complete with: (1) Beaker (1000mL) (2) Graduated Test Tubes (2) Un-graduated Test Tubes (2) Rubber Stoppers for Test Tubes ⦁ A preview of the included instructions can be found at the bottom of this listing. ⦁ Measurements are approximate. ⦁ Instructions Included. ⦁ Catalog # 1554-25 ⦁ Shipping Weight 5.00 lbs
Testing ApparatusGet Best Quote