Welding Machinery

We offer the best product range of Tig / Argon Welding Machine, Armac Unique Welding Machine, AC/DC Welding Machine, Welding Machine and MIG , Mag CO2 Welding Machine.

Tig / Argon Welding Machine

Why Armac Tig Plus ? experience True Weld Control & Precision with Tig (tungsten Inert Gas) Welding. the Tig Process Lets You Weld Thinner Material Than Others Processes. if You Want to Solve Problems Related to Burn Through or Warping When Sticks or Wire Welding, Tig Might Be the Solutions. this Welding Process Uses a Non-consumable Tungsten Electrode and a Shielding Gas Which Protects the Welding Area from Contamination. the Concentrated Heat and Precise Control of the Tig Arc Allows Thin Material (.010 In) to Be Welded. advantages:welds Steel, Aluminum and other Metals with Just a Single Gas, Argon. precise Welding On Thin Materials is Easily Accomplished Plus There is Less Distortion Overall. tig/argon Welding Machinesfeatures:-a Better & Quicker Job with Les Spatter. good Arc Stricking Properties with Higher Efficiency. simple Operation. no Breakdown. minimum Maintenance. high Efficiency. power Saving. low Running Cost. optional Gtaw (tig) Accessoriesgas & Water Cooled Tig Torches. water Cooling System gas Flow Meter and Pressure Regulator. remote Current Control with 10, 25, 50, 100 Mtrs Control Copper Cable. tigniter High Frequency Unit with Foot / Hand Switch.

<b>Technical Data Covering IS-4559-1993</b>

CAPACITY OF RECTIFIER MAX.	AXT-300	AXT-400	AXT-500	AXT-600
INPUT .
Supply voltage 3 PH	380/415/440	380/415/440	380/415/440	380/415/440
Primary Current at Max. Output	30A	40A	50A	60A
OUTPUT	D.C.	D.C.	D.C.	D.C.
Open circuit Voltage	85	90	90	90
Max. Continuous Current at 100% Duty Cycle	225	300	340	420
Max. Continuous at 60% Duty Cycle	300	400	500	600
KVA-Max. Continuous	15	20	25	30
KVA- Max.	20	26	33	43.2
Welding Current range (in Two Ranges)	10-300A	10-400A	10-500A	10-600A
GENERAL
Max. Ambient Temp. to which Rating Apply	40 C	40 C	40 C	40 C
Class of Cooling	H	H	H	H
Type of Cooling	Forced Air Cooled	Forced Air Cooled	Forced Air Cooled	Forced Air Cooled
Approx. Dimensions (LxWxH) mm	658 x 762 x 508	711 x 762 x 546	711 x 762 x 546	736 x 762 x 596
Approx. Weight Kg.	200	220	240	265



Note : In view of continuous development, we reserve the right to modify the design and dimensions without notice. Duty cycles are applicable for 5 minutes at 40⁰C.

View Complete Details

Ask Latest Price & Details

Armac Unique Welding Machine

Featuresa Better & Quicker Job with Less Spatter.good are Stricking Properties with Higher Efficiency.continious Amperage Adjustment (mechnical).forced Draft Fan Cooling (in Case Air Cooled).protective Secondry & Primary Terminal Under Hinged Door.compact in Size and Light in Weight.mounted On Wheel.minimum Maintenance.power Saving.available in : 1/2/3 Phase

TECHNICAL SPECIFICATION COVERING IS -1851

	Model - Unique		Unique AXU-300	Unique AXU-400	Unique AXU-600
1	Welding Current range	AMPS.	30-300	30-400	40-600
2	Max. Cont. current at 60% Duty Cycle	AMPS.	300	400	600
3	Max. Cont. current at 100% Duty Cycle	AMPS.	180	240	260
4	Open Circuit Voltage	VOLTS	65	70	80
5	KVA Rating at 60% Duty Cycle	KVA	19.5	32	32.5
6	Input supply	VOLTS		2 Lines of 3 Phase
7	Frequency	HZ	50HZ	50HZ	50HZ
8	Cooling		Forced Air Cooled
9	CLASS	H	H	H	H
10	Type of output Current Regulation		STEPLESS REGULATION

View Complete Details

Ask Latest Price & Details

AC/DC Welding Machine

Featuressuitable for Both S.s and Aluminium Tig Welding.a Better & Quicker Job with Less Spatter.good are Stricking Properties with Higher Efficiency.continious Amperage Adjustment (mechnical).forced Draft Fan Cooling (in Case Air Cooled).protective Secondry & Primary Terminal Under Hinged Door.compact in Size and Light in Weight.mounted On Wheel.minimum Maintenance.power Saving.

TECHNICAL SPECIFICATION COVERING IS -1851

	Model Multipurpose		AXB-400
1	Welding Current range	AMPS.	10-400
2	Max. Cont. current at 60% Duty Cycle	AMPS.	400
3	Max. Cont. current at 100% Duty Cycle	AMPS.	240
4	Open Circuit Voltage	VOLTS	70
5	KVA Rating at 60% Duty Cycle	KVA	26
6	Input Supply	VOLTS	2 lines of 3 Phase
7	Frequency	HZ	50HZ
8	Cooling	TYPE	Forced Air Cooled
9	Insulation	CLASS	H
10	Type of output Current Regulation	MODE	STEPLESS REGULATION

View Complete Details

Ask Latest Price & Details

Welding Machine

Power Source

Constant Voltage.
Fitted with Amps & Volt Meter.
Toggal Button For gas & OCV Checking.

Equipments Provided

Power source, wire feeder
Flow meter, pressure regulator & gas pre-heater.

Wire Feeder

Most easy maintenance wire feeder with 2 roll/4 quick release type.
D.C. DrivePermanent magnet motor to maintain constant speed, Push button for wire inching.

Torch

Heavy duty, light weight & most flexible torch

ODEL	Automat AXM-250	Automat AXM-400	Automat AXM-600
Welding Curreent Range	250 A	400 A	600 A
Input Supply Rating	415 V-3Ph, 50 Hz	415 V-3Ph, 50 Hz	415 V-3Ph, 50 Hz
Open Circuit Voltage	18-38 V	18-52V	18-56V
Welding Current @ 60% D/c	250A	400A	600A
Welding Current @100% D/c	180A	315A	480A
Input Supply Rating @ 60% D/c	8.8KVA	22.5 KVA	35 KVA
Input Supply Rating @ 100% D/C	6.5 KVA	17 KVA	27 KVA
Cooling	F O R C E D A I R C O O L E D
Isolation Class	H	H	H
Dimensions (LxWxH) mm	780x460x700	790x510x725	870x600x820
Weight Kg	100	135	170
WIRE FEEDER
Wire Size Steel	0.8	1.2 mm	1.6 mm
Aluminum	1.2 mm	1.6 mm	2 mm
Speed Range Min.	0-18	0-18	0-18
Drive	2 Roll	2 Roll	4 Roll
Control	THYRISTOR	PRINTER	CIRCUIT
Overall Dia mm Spool Size	300	300	300
Bore mm	50	50	50
Weight Appro Kg	10	10	10
Torch	25 A.K	36 KD	40 KD

View Complete Details

Ask Latest Price & Details

MIG , Mag CO2 Welding Machine

Mig / Mag CO2 Jain weld house offers a series of ARMAC portable arc welders optimized to be the most rugged & reliable STICK welders , TIG welders, MIG welders , BUTT welders , SPOT WELDERS , PUG cutters in the market. Why ARMAC Automat? Welds light guage material or thick platesHigh welding speed can be obtained upto 4 times faster stick welding. Reducing repair or construction time. A further advantage is that the same equipment used for MIG welding also performs flux cored welding. Rather than running a solid wire coupled with a shielding gas, flux cored welding uses self-shielded wire with flux inside. Features:Welds all common metals carbon steel, stainless steel, aluminum. Continuous wire feed, which minimizes starts and stop.Increased metal deposition which is beneficial for hard facing.Minimum Maintenance. High efficiency. Power saving. Low running cost Mig / Mag CO2 Welding Machine Power Source Constant Voltage. Fitted with Amps & Volt Meter. Toggal Button For gas & OCV Checking. Equipments Provided Power source, wire feederFlow meter, pressure regulator & gas pre-heater. Wire Feeder Most easy maintenance wire feeder with 2 roll/4 quick release type.D.C. DrivePermanent magnet motor to maintain constant speed, Push button for wire inching. Torch Heavy duty, light weight & most flexible torch

<b>Techinical Specification Covering IS - 7931</b>

MODEL	Automat AXM-250	Automat AXM-400	Automat AXM-600
Welding Curreent Range	250 A	400 A	600 A
Input Supply Rating	415 V-3Ph, 50 Hz	415 V-3Ph, 50 Hz	415 V-3Ph, 50 Hz
Open Circuit Voltage	18-38 V	18-52V	18-56V
Welding Current @ 60% D/c	250A	400A	600A
Welding Current @100% D/c	180A	315A	480A
Input Supply Rating @ 60% D/c	8.8KVA	22.5 KVA	35 KVA
Input Supply Rating @ 100% D/C	6.5 KVA	17 KVA	27 KVA
Cooling		F O R C E D A I R C O O L E D
Isolation Class	H	H	H
Dimensions (LxWxH) mm	780x460x700	790x510x725	870x600x820
Weight Kg	100	135	170
WIRE FEEDER
Wire Size Steel	0.8	1.2 mm	1.6 mm
Aluminum	1.2 mm	1.6 mm	2 mm
Speed Range Min.	0-18	0-18	0-18
Drive	2 Roll	2 Roll	4 Roll
Control	THYRISTOR	PRINTER	CIRCUIT
Overall Dia mm Spool Size	300	300	300
Bore mm	50	50	50
Weight Appro Kg	10	10	10
Torch	25 A.K	36 KD	40 KD