Jaycee Technologies Pvt. Ltd.

Shivane, Pune, Maharashtra

Measuring principle is transit time difference. Pipe size compatibility ranges from 15 mm to 6000 mm. Flow velocity range is ±0.01 to ±32 m/s. Accuracy is ±1% of reading. Repeatability is ±0.2%. Response time is less than 1 second. Display type is LCD with backlight. Outputs include 4-20 mA, OCT pulse, and RS485 (Modbus). Power supply options include 110–240V AC or 24V DC. Operating temperature range is -30°C to +160°C for transducers. Enclosure is IP65 or IP67 rated. Suitable for clean or slightly dirty liquids with less than 5% solid content. Clamp-on installation method eliminates the need to cut pipes.

Features :

• For continuous level measurement of liquids (even if polluted), mash and paste materials in open or closed vessels, sumps, open channels, drains, etc.
• Quick view measured values on the display 
• Easy adjustment without measured material
• Elimination of false echoes
• Zone temperature compensation
• Possibility of using in explosive areas (version Xi)
• Current output (4 . 20 mA) with HART® protocol or output RS–485 Modbus
• Copying of level meter configuration using display module DM-70
• While used with horn adapter can be measured also some difficult media (foamy levels, bulk solids, etc.)

FEATURES

• Suited to continuous level mesurement of various liquid, mush and bulk-solid materials.
• Universal use, direct mounting into containers, silos, vessels, reservoirs, etc.
• Stainless steel rod or rope electrode
• Measuring range up to 40m
• Linear measurement in non-conductive and in differently shaped containers
• Quick view measured values on the display
• Simple installation and setting
• Current output (4 . 20 mA), HART® protocol

Features of variants

• GRLM–70_–00 without electrode, the electrode is made by customer (only variant 10 or 30) and connected to the electrode junction by M8 thread.
• GRLM–70_–10 Uncoated stainless steel rod electrode, for level measurement liquids and bulk solid materials (water, water solutions, emulsion, oils, diesel, flour, sand, granulates, etc.). Maximum electrode length 8 m.
• GRLM–70_–11 Fully coated stainless steel rod electrode (PFA Teflon®), for level measurement of aggressive liquids and very pure liquids. Maximum electrode length 2 m.
• GRLM–70_–12 Fully coated stainless steel rod electrode (FEP Teflon®), for level measurement of aggressive liquids and drinks. Maximum electrode length 2 m.
• GRLM–70_–20 Uncoated stainless steel rod electrode with reference tube, for accurate level measurement of liquids in cramped spaces. Maximum electrode length 3 m.
• GRLM–70_–30 Uncoated stainless steel rope electrode and weight, for level measurement of liquids and bulk solid materials (water, grains, sand, flour, cement, etc.) in higher silos, vessels, reservoirs. Maximum electrode length 40 m.
• GRLM–70_–32 Fully coated stainless steel rope electrode and coated weight, for level measurement of aggressive liquids and very pure liquids. Maximum electrode length 12 m.
• GRLM–70_–33 Uncoated stainless steel rope electrode with anchorage, for level measurement of bulk solid materials (grains, flour, cement, etc.) in higher silos, vessels. Maximum electrode length 40 m.

Features : 

• For continuous level measurement of liquids (even if polluted), mash and paste materials in open or closed vessels, sumps, open channels, etc.
• Variants of level meter with adjustment by two buttons, or by magnetic pen
• Xi version for usage in explosive areas
• State indication by two LEDs
• Current output (4 . 20 mA), voltage output (0 . 10 V) or RS-485 Modbus output
• Wide choice of electric connection via connectors, cable glands or protective conductor
• While used with horn adapter can be measured also some difficult media (foamy levels, loose materials, etc.)

SALIENT FEATURES :

• Strong, stable sensor suitable for harsh industrial situation
• Strong anti-interference, can be arbitrarily set the upper and lower nodes and on-line output regulation
• Transducer builtin temperature sensor, to achieve real-time measurement of the value of automatic temperature compensation
• Blind spots can also be manually set, shielding the probe near the interference signal
• 4 - 20MA current output, optional eld bus interface

APPLICAI IONS :

• Water and waste water treatment
• Pumping station, collection wells, biochemical reaction tank, sedimentation tanks, etc.
• Electric power, mining mortar pool, coal slurry pond, water treatment, etc.

Display :

LCD display - Level distance, transmission value, ambient Temperature, echo state, alarm display, algorithm selection

Analog Output :

4-20mA/750 load resistance (2wire), 4-20mA/250 load resismnce (4wire), OPTIONAL 1-5V (3wires), 0-5V (3 wires), O-10V (3wires)

SALIENT FEATURES :

• Strong, stable sensor suitable for harsh industrial situation
• Strong anti-interference, can be arbitrarily set the upper and lower nodes and on-line output regulation
• Transducer builtin temperature sensor, to achieve real-time measurement of the value of automatic temperature compensation
• Blind spots can also be manually set, shielding the probe near the interference signal
• 4 - 20MA current output, optional eld bus interface

APPLICAI IONS :

• Water and waste water treatment
• Pumping station, collection wells, biochemical reaction tank, sedimentation tanks, etc.
• Electric power, mining mortar pool, coal slurry pond, water treatment, etc.

Display :

LCD display - Level distance, transmission value, ambient Temperature, echo state, alarm display, algorithm selection

Analog Output :

4-20mA/750 load resistance (2wire), 4-20mA/250 load resismnce (4wire), OPTIONAL 1-5V (3wires), 0-5V (3 wires), O-10V (3wires)

We are one of the leading Suppliers of Moisture Measurement Meter. Flush mount, digital, microwave Moisture Measurement Meter is accurately designed following the set industrial parameters. The Hydro-Mix VII is a rugged, microwave Moisture Measurement Meter designed to be installed flush with the floor of a mixer, chute or conveyor in process control environments. Reading at 25 times per second and combined with on-board functionality such as signal processing, smoothing and averaging, the Hydro-Mix VII Moisture Measurement Meter accurately measures the moisture content of material as it passes over the ceramic faceplate. Remote configuration, calibration, diagnostics and firmware upgrades are simple using Hydronix Hydro-Com software. The linear output allows direct integration with any control system using industry standard interfaces. Features

• Digital technology provides precise linear moisture measurement.
• Advanced Digital Signal Processing provides a clear signal with rapid response.
• Choice of measurement modes for optimizing sensor performance in a variety of applications and material types
• Fully temperature compensated measurement.
• Two analogue outputs, digital RS485 communications and configurable digital input/outputs.
• Fast response to changing conditions with 25measurements per second
• Remote communication with Hydro-Com software allows configuration of all sensor parameters including selection of sensor outputs, graphic traces of outputs, calibration of sensor readings and firmware upgrades.
• Consistent performance with no need for recalibration except for use with different materials
• Tough and reliable with proven track record
• Easily replaced ceramic faceplate and protection ring

Moisture Measurement In Bulk Materials ( Hydroprobe-II ) : The ultimate intelligent microwave sensor for measurement of moisture in sand and free flowing solid materials in bins Range of moisture : For bulk materials the sensor will measure up to the point of saturation typically 0-20% for construction materials Penetration : Approximately 75-100mm dependent on material Power supply : +15Vdc to +30Vdc. 3 watts max Refresh rate : Outputs are updated approximately 25 times per second Analogue output : Configurable 0-20mA or 4-20mA current loop sourceFor 0-10Vdc output an external 500R load resistor should be connected across the analogue output at the control system Discrete inputs : The batch average start and stop or moisture/temperature multiplexing functions can be controlled via the digital inputs, Refer to 'Connecting the Cable' section of the manual for more information. Digital Communications : Up to isolated RS485 2-wire port