Post Buy Requirement
JEKSON MACHINERY PVT.LTD
Ahmedabad, Gujarat, India
Add Review

Other Products / Services

CNC Plasma Cutting

  • Cutting Thickness 25mm
  •    
  • Rail length 7000mm
  • Capacitive height sensor for Oxy fuel torch 1 Set
  • Plasma Station with height sensor 1 Set
  • 15” CNC System Touch Screen Technical association From Italy
  • Programming nesting software In built
  • Cable/hose supply in transverse Drag chain
  • Cable/hose supply in longitudinal Drag Cable chain
  • Master, slave rails Heavy duty
  • Machine color Off white
  • Drive mode Single sided drive
  • Effective cutting width of 1 torch 1800 x 7000mm
  • Effective cutting length 7000mm
  • Plazma power source Clean cut 25mm
  • Rapid speed 100-12000mm/min
  • Torch lifting distance :150mm ± 0.5 mm/10M
  • Straight line positioning precision ± 0.4mm/10M
  • Straight line repeat precision ± 0.5mm
  • Plasma Arc voltage control = ± 5%
High cutting accuracy
- High and dynamic precision
- Positioning accuracy 0, 1mm
- Positioning speed max. 20, 000 mm/min


- Cutting speed 0-10, 000 mm/min

View Complete Details

CNC Extra Long Milling

  •  Plate thick  10MM to 50MM Thk
  •  Cutting Length 2 Nos.
  • No. of Cutting Head  12 mtrs for Single Cut with Two Milling Head
  • Cutting Bed Length 6000MM
  •  Cutting Head Travel Length 800MM
  • Working Height  Hydraulic
  • Plate Clamp 2 Nos.
  •  Milling Head 10 HP each
  • Milling Head Motor  80 to 200MM/Minute [Variable]
  • Cutting Speed 150MM
  •  Throat Depth 20 Nos.

Standard Supply:


Main drive Motor


Electric control panel with INCH & SINGLE CYCLE AUTO OPERATION


Stroke adjustment rod with Limit Switch


Blade mounting with machine


Application:



Angle Cutting.

View Complete Details

Cnc Plate Punching

Standard Features:

Down stroking, Electric/Hydraulic closed loop servo valve controlled.


Two axis independent ram control (Y1 & Y2), ram is fully guided throughout the entire stroke, guides do not require lubrication and linear encoders for ram feedback and positioning (.01mm/.0004")


High Speed, CNC back gauge (X), two finger stops with alenguide are standard (Optional R axis)


Esa 550c compact numerical control.



Two material support arms with alenguide.


Machine Frame:


The frame is an assembly of a heavy steel plate consisting of 2 side frames, a upper and lower cam plate, reinforced sheet-metal plate for the oil-tank and the hydraulic unit. After welding of the frame it is de-stressed. Some of the main features of this frame are:


The machined cylinder mount is a integral part of the side-frame.


The extra heavy side and rear plates provide superior frame stability.


Ram electrical / hydraulic closed-loop servo system

View Complete Details

Hydraulic Shearing Machine

Standard Feature Accessories:


Main drive standard make motor


Electrical control panel with three speed inch, single cycle, Auto mode of operation.


Two front sheet supports


Manual back gauge with micro-adjusment swing stoppers. pair of lifting chains.


fine stroke adjustment rod with limit switches.


One suitable 5 way die and blade.


(segmented ofr full length, EN-9 not covered under warranty)


moveble console with emergency stop.


Tonnage indicating - adjustment device.


Manual centralized lubrication system with hand pump.


bending chart.


Feature:




Mono Block Welded Steel Frame ultra tested-2062


steel plates rigid to provide Accurate bending.


All pivots have hardened of ground pin bushes of five


piece guide slide lubricated by central hand pump


Repetitive accuracy is within +0.03mm Ram travel parallelism with out using sensitive & complex servo Hydraulics.


Most reliable Hydraulic components & sealing for international reputed design for 350 bar against operating pressire of 160 bar maximum.


Three cycles operation inch, Single cycle&Auto for grater operator convenience.


Three speed operation reduces ideal travel time which improves productivity.


Bending force easily adjustable From front for forgue tool of bending material.

View Complete Details

Hydraulic Type Press

Cap . 20 ton to 500 ton
Application:- Punching - Forming - Straightening - Stamping - Embossing Cutting

Hydraulic Press
Cap . 20 ton to 500 ton
Application:- Punching - Forming - Straightening - Stamping - Embossing Cutting

View Complete Details

CNC Waterget

Advantages of Waterjet Cutting




No heat affected zones, dust or fumes


No tool sharpening


Low tangential Force on part


Small cutting width (Kerf)


Good cutting quality


High speed cuts in many materials


Cad/Cam Systems


Environmentally safe


High cutting speed

View Complete Details

Angle Shearing Machine

Standard Supply:

• Main drive Motor

• Electric control panel with INCH & SINGLE CYCLE AUTO OPERATION

• Stroke adjustment rod with Limit Switch

• Punch & Die Adaptor

Application

 

• Angle Cutting.

Specifications:

Capacity 120 Ton 220 Ton

Angle Size  90 x 90 x 10MM  150 x 150 x 16MM

Stroke of Cylinder 50 MM 50 MM

Oil Tank Capacity  160 Ltrs  160 Ltrs

Type of Operation  Single Cut Type  Single Cut Type

Motor Speed  7.5 H P (1440 RPM) 15 / 6 SPM

Working Pressure  220 Kg  220 Kg

Speed : Downward & Upward 15 /6 SPM 15 / 6 SPM

Working Height  850 MM  850 MM

Net Weight 1500 Kgs 2000 Kgs

View Complete Details

Hydraulic Press

Standard Feature Accessories:

• Main drive standard make motor

• Electrical control panel with three speed inch, single cycle, Auto mode of operation.

• Two front sheet supports

• Manual back gauge with micro-adjusment swing stoppers. pair of lifting chains.

• fine stroke adjustment rod with limit switches.

• One suitable 5 way die and blade.

• (segmented ofr full length, EN-9 not covered under warranty)

• moveble console with emergency stop.

• Tonnage indicating - adjustment device.

• Manual centralized lubrication system with hand pump.

 

• bending chart.

Feature:

• Mono Block Welded Steel Frame ultra tested-2062

• steel plates rigid to provide Accurate bending.

• All pivots have hardened of ground pin bushes of five

• piece guide slide lubricated by central hand pump

• Repetitive accuracy is within +0.03mm Ram travel parallelism with out using sensitive & complex servo Hydraulics.

• Most reliable Hydraulic components & sealing for international reputed design for 350 bar against operating pressire of 160 bar maximum.

• Three cycles operation inch, Single cycle&Auto for grater operator convenience.

• Three speed operation reduces ideal travel time which improves productivity.

• Bending force easily adjustable From front for forgue tool of bending material.

View Complete Details

Cnc Shearing Machine

Moving beam Synchronized by differential cylinders, hardened rollers guide beam for constant blade gap, Blade gap easily adjustable by calibrated levers Rake angle sdjustable to suit thikness and material, Activation from consol and movable foot switch, Sheet clamped Hydraucally before cut starts.Stroke length - position can be set for short jobs, Mono Block Welded Steel ridid to deflection tensile Moment of high tensille.
Easy of accurate gap adjustment of blades for bur-free cuts.
Monorized back gauge with electronic digital readout.
Electronically adjustment RAKE ANGLE as per material of thickness for twist free cuts.
Synchronized Beam guided system for constant gap between Blades.
Extra capacity to cut Hard-thicker plate than nominal capacity.
Blades Produced from High alloying steel with functionalfour side.
Adjustable Cutting & clamping force for quality cutting & power saving,
Rapid cutting of short pieces by electrical stroke adjustment system.
View Complete Details

Angle Stamping Machine

Standard Supply:

• Main drive Motor

• Stamping Holder without stamp.

• Electric control panel with INCH & SINGLE CYCLE AUTO OPERATION

 

• Stroke adjustment rod with Limit Switch

Specifications:

Capacity 75 Ton  100 Ton

Press Type C – Type C – Type

Number Stamping :  08 Characters 12 Characters

Depth of Characters 1 MM (Adjustable)  1 MM (Adjustable)

Table Size: 500 x 300MM 500 x 300MM

Bolster Area (L.R. x F.B.)  600 x 200 MM  600 x 200 MM

Open Daylight  300MM 300MM

Throat Depth 250 MM  250 MM

Cyl Stroke:  100MM (Adjustable)  100MM (Adjustable)

Working Height: 750 MM 750 MM

Speed 25 Strokes/Min ( At 25mm Length)  25 Strokes/Min ( At 25mm Length)

Working Pressure 750 MM 750 MM

Oil Tank Capacity  160 Ltrs 200 Ltrs

Motor:  7.5 H P 10 H P

View Complete Details

Angle Knotching Machine

Standard Supply:


Blade Mounted with Machine


Stroke setting with Limit Switch


Electric control panel with INCH & SINGLE CYCLE AUTO OPERATION


Application



Angle Corner Cutting


"V" Notching

Specifications:

 

Capacity : 45 Ton : 70 Ton

Cutting Flange : 100MM x 10 MM Thik : 150 MM x 12MM Thik

Working Height : 850 MM : 850 MM

No of Stroke : 6 Strokes / Min (At 25MM Stroke Length) : 6 Strokes / Min (At 25MM Stroke Length)

Motor: : 7.5 H P : 7.5 H P

Working Pressure : 180 Kg : 180 Kg

Type of Operation : Vertical : Vertical

View Complete Details

Hydraulic Angle Shearing Machine

  • Capacity 120 Ton
  • Angle Size 90 x 90 x 10MM
Main drive Motor, Electric control panel with INCH & SINGLE CYCLE AUTO OPERATION, Stroke adjustment rod with Limit Switch
View Complete Details

Cnc Plate Punching Machine

Down stroking, ElectricHydraulic closed loop servo valve controlled, Two axis independent ram control (Y1 & Y2), ram is fully guided throughout the entire stroke, guides do not require lubrication and linear encoders for ram feedback and positioning (.01mm.0004"), High Speed, CNC back gauge (X), two finger stops with alenguide are standard (Optional R axis) Esa 550c compact numerical control, Two material support arms with alenguide. The machined cylinder mount is a integral part of the side-frame., The extra heavy side and rear plates provide superior frame stability. Ram electrical hydraulic closed-loop servo system.
View Complete Details

Pipe Notching Machine

We are celebrated name based in gujarat(india) and actively engrossed in making available high quality products at the most reasonable prices. Buyers are free to place orders and can expect timely deliveries of the same.
View Complete Details

Hydraulic Angle Flange

We are the Manufacture and wholesale supplier of Hydraulic Angle Flange. We supply this Qualitative Product in All over the domestics & International Market at competitive Price.
View Complete Details

Embossing Machines

We are the Manufacturer and wholesale supplier of Embossing Machine. We supply this Qualitative Product in All over the domestics & International Market at competitive Price
View Complete Details

Transmission Tower Making Machinery

We are the Manufacture and wholesale supplier of Transmission Tower Making Machinery. We supply this Qualitative Product in All over the domestics & International Market at competitive Price.
View Complete Details

Special Purpose Machinery

We are the Manufacture and wholesale supplier of Special Purpose Machinery. We supply this Qualitative Product in All over the domestics & International Market at competitive Price.
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

  • HARDIK PANCHAL (JEKSON MACHINERY PVT.LTD)
  • Plot No. 168, Road No.4 ,G.i.d.c.kathwada, Ahmedabad-382430, Gujarat, India
  • Share us via
  • Call 08068051313 Ext. 941