Jet Flow Safety Valve represent the most advance technology in value designed for use in intermediate power boiler and organic fluid vaporizer service. Built in conformance to section I of the ASME boiler and pressure vessel code, all capacities am certified by the national board of boiler and pressure vessel inspector at 5% over pressure.
Jet Flow Designed Safety Valve with Full Nozzle & hardened disc to minimize maintenance and increase seat life Open bonnet & Close bonnet both design have maximum set pressure 75 bar in Safety Valves.
Technical Details :

• Size Range - 15 mm TO 200 mm
• Moc - Cast steel,CF8,CF8M,GM
• End Connection - Screwed End, Flanged End, Butt weld
• Pressure Rating - 150 class, 300 class
• Trims - SS 304,SS 316

• Design  :
  
  • Angle Type(Lever operated / without lever)
  • Pop Type (Lever operated / without lever)
  • Open Discharge Type (Lever operated / without lever)
  • Angle type CP

• Design Standard - API 526 ,520 & IBR
• Testing Standard - API 527
• Flange drilling - ANSI B16.5
• Leakage test - API 527
• Suitable Application - Steam, Gas, Air, Water, Oil

While Enquiry Please Specify :

• Material of Construction.
• Set pressure in psig or Kg/cm2 (g).
• Maximum inlet temperature.
• Allowable over-pressure.
• Service-Specify either the media to be handled or the following physical properties or both.
• Liquids-Specific gravity (Water = 1)
• Gases-Specific gravity (Air=1)
• Vapors-Molecular weight (mixture of vapors. The average molecular weight)
• Back pressure, if any.
• Required capacity.
• Type of End-connections.
• Preferred inlet size.

Jet Flow Safety Valve represent the most advance technology in value designed for use in intermediate power boiler and organic fluid vaporizer service. Built in conformance to section I of the ASME boiler and pressure vessel code, all capacities am certified by the national board of boiler and pressure vessel inspector at 5% over pressure.
Jet Flow Designed Safety Valve with Full Nozzle & hardened disc to minimize maintenance and increase seat life Open bonnet & Close bonnet both design have maximum set pressure 75 bar in Safety Valves.
Technical Details :

• Size Range - 15 mm TO 200 mm
• Moc - Cast steel,CF8,CF8M,GM
• End Connection - Screwed End, Flanged End, Butt weld
• Pressure Rating - 150 class, 300 class
• Trims - SS 304,SS 316

• Design  :
  
  • Angle Type(Lever operated / without lever)
  • Pop Type (Lever operated / without lever)
  • Open Discharge Type (Lever operated / without lever)
  • Angle type CP

• Design Standard - API 526 ,520 & IBR
• Testing Standard - API 527
• Flange drilling - ANSI B16.5
• Leakage test - API 527
• Suitable Application - Steam, Gas, Air, Water, Oil

While Enquiry Please Specify :

• Material of Construction.
• Set pressure in psig or Kg/cm2 (g).
• Maximum inlet temperature.
• Allowable over-pressure.
• Service-Specify either the media to be handled or the following physical properties or both.
• Liquids-Specific gravity (Water = 1)
• Gases-Specific gravity (Air=1)
• Vapors-Molecular weight (mixture of vapors. The average molecular weight)
• Back pressure, if any.
• Required capacity.
• Type of End-connections.
• Preferred inlet size.