GST : 24AACCJ8925G1ZJ
4.4/5
Our Product / Services
Our Complete range of products are jyoti brushable ceramic blue coating, Anti Corrosion Coating and Ceramic Spray Coating.
Brushable Ceramic Coating is the non machinable product. Ceramic, High Aluminium Oxide and other filled materials reinforces with highly corrosion proof polymers adhere to almost all surfaces. These coatings are specially used when Corrosion is encountered. These products are used for repairing and prevention of any metal in Corrosion & Acidic or Alkali areas. It is used for getting Glassy Surface finish.
Benefits:
Additional Information:
Payment Terms :
Packaging Details : JYOTI INNOVISION PRIVATE LIMITED
PLOT NO. 7 , N.K . 3 INDUSTRIAL PARK ,
BAKROL - BUJRANG, AHMEDABAD -382433 , GUJARAT.
Delivery Time : 2-3 Days
JYOTI CORRO COAT – GLASS is made from Super fine chemical resistant glass powder having 300 Mesh and other filled materials reinforce with highly corrosion proof polymers. This can adhere to almost all metallic and concrete surfaces.
These coatings are specially used when Corrosion is encountered. These products are used for repairing and prevention of any metal in Corrosion & acidic or alkali areas. It is used for getting glassy surface finish & repairing of glass lined equipment also.
FEATURES & BENEFITS
Additional Information:
Payment Terms :
Packaging Details : JYOTI INNOVISION PRIVATE LIMITED
PLOT NO. 7 , N.K . 3 INDUSTRIAL PARK ,
BAKROL - BUJRANG, AHMEDABAD -382433 , GUJARAT.
Delivery Time : 2-3 Days
To ensure long term performance of Coating, the proper preparation of the surface is of utmost importance & the procedure of surface preparation depends upon the severity of the application, expected service life and surface condition. A thoroughly clean abraded surface will hold the applied coating compound firmly. We recommend the following to be followed…
DIRECTION TO USE:
1. Shake well the packed bucket prior to open.
2. Stir the Resin on opening prior to removal of required quantity.
3. Collect the required quantity only from bucket 3part Resin & 1part Hardener & sealed the balance material bucket immediately.
4. Mix the Resin & Hardener properly in recommended mixing ratio.
5. On preparation of properly mix material ratio, the mixture must apply immediately within 30 minutes. (Pot life varies with ambient temperature & quantity of the mixture & also the Viscosity depends on the ambient temperature & quantity of the mixture & pot life of the mixture).
6. Apply the second coat between 20 to 30 minutes after first coat. (For where ever the second coat of respective material recommended).
7. After successful of application, permit 5 to 6 hours curing time before transportation, assembly etc. purpose, however the actual use of surface contact area functional material application is recommended after 24 hours. (Working time & curing time of the coating depends on the mixed mass & temperature. Higher the ambient temperature, faster will be the rate of curing).
8. Maximum 5% of Epoxy/NC Thinner for thinning the coating material.
9. For Sprayable coating application the Pilot Spray Gun Type P - 80 (Gravity feed gun with 0.75 Ltrs. capacity gravity cup) Nozzle aperture size - 1.57 mmis recommended.
10. Shelf life of the material in original airtight packed container is 8 to 10 months.
Additional Information:
Payment Terms :
Packaging Details : JYOTI INNOVISION PRIVATE LIMITED
PLOT NO. 7 , N.K . 3 INDUSTRIAL PARK ,
BAKROL - BUJRANG, AHMEDABAD -382433 , GUJARAT.
Delivery Time : 2-3 Days
Mr. YOGESHKUMAR GOHIL (Jyoti Innovision Private Limited)
No. 606, 6th Floor Milestone, Opposite Reliance Market, Near Drive In Cinema, Memnagar, Ahmedabad, Gujarat - 380054
https://www.jyotiinnovision.in
Share us via
