Listing ID #4865955
Company Information
Ask for more detail from the seller
Contact SupplierPhillips flat head Wood Screws Manufacturers Suppliers in India
Flat heads are countersunk (cone shaped under the head) with a flat top. Phillips drives are X shaped for a phillips screw driver.
Stainless steel 18-8
Zinc plated steel
Brass
Show Details
Frearson flat head
Flat heads are countersunk (cone shaped under the head) with a flat top. Frearson drives are X shaped similar to phillips drive.
Silicon bronze
Show Details
Slotted flat head
Flat heads are countersunk (cone shaped under the head) with a flat top. Slotted drives are simple slots for a flat bladed screw driver.
Stainless steel 18-8
Zinc plated steel
Brass
Silicon bronze
Show Details
Slotted oval head
Oval heads are countersunk (cone shaped under the head) with a rounded top. Slotted drives are simple slots for a flat bladed screw driver.
Stainless steel 18-8
Brass
Silicon bronze
Show Details
Phillips round head
Round heads are domed and look like half of a sphere. Phillips drives are X shaped for a phillips screw driver.
Zinc plated steel
Brass
Show Details
Slotted round head
Round heads are domed and look like half of a sphere. Slotted drives are simple slots for a flat bladed screw driver.
Stainless steel 18-8
Zinc plated steel
Brass
Silicon bronze
Approximate hole sizes for wood screws - hard wood and soft wood - are indicated below:
Nominal Screw Size | Nominal Shank Diameter (in) |
Actual Shank Diameter (in) |
Twist Drill Size | |||||||
Pilot Holes | Shank Clearance Holes | 80o Countersink Diameter | ||||||||
Hard Wood | Soft Wood | |||||||||
Inch | No. | Inches | No. | Inch | No. | Actual Head Diameter (in) |
Diameter (in) |
|||
# 0 | 0.060 | 0.064 | 3/64 | 58 | 1/32 | 69 | 1/16 | 52 | 0.119 | 1/8 |
# 1 | 0.073 | 0.077 | 3/64 | 55 | 1/32 | 65 | 5/64 | 47 | 0.146 | 3/16 |
# 2 | 0.086 | 0.090 | 1/16 | 53 | 3/64 | 59 | 3/32 | 42 | 0.172 | 3/16 |
# 3 | 0.099 | 0.103 | 1/16 | 51 | 3/64 | 56 | 7/64 | 37 | 0.199 | 1/4 |
# 4 | 0.112 | 0.116 | 5/64 | 48 | 3/64 | 55 | 7/64 | 32 | 0.225 | 1/4 |
# 5 | 0.125 | 0.129 | 5/64 | 44 | 1/16 | 53 | 1/8 | 30 | 0.252 | 1/4 |
# 6 | 0.138 | 0.142 | 3/32 | 42 | 1/16 | 52 | 9/64 | 27 | 0.279 | 3/8 |
# 7 | 0.151 | 0.155 | 3/32 | 38 | 1/16 | 50 | 5/32 | 22 | 0.305 | 3/8 |
# 8 | 0.164 | 0.168 | 7/64 | 35 | 5/64 | 48 | 11/64 | 18 | 0.332 | 3/8 |
# 9 | 0.177 | 0.181 | 1/8 | 32 | 5/64 | 46 | 3/16 | 14 | 0.358 | 3/8 |
# 10 | 0.190 | 0.194 | 1/8 | 30 | 3/32 | 44 | 3/16 | 10 | 0.385 | 1/2 |
# 11 | 0.203 | 0.207 | 1/8 | 29 | 3/32 | 43 | 13/64 | 4 | 0.412 | 1/2 |
# 12 | 0.216 | 0.220 | 9/64 | 27 | 3/32 | 39 | 7/32 | 2 | 0.438 | 1/2 |
# 14 | 0.242 | 0.246 | 5/32 | 20 | 7/64 | 34 | 1/4 | D | 0.507 | 1/2 |
# 16 | 0.268 | 0.272 | 3/16 | 16 | 1/8 | 31 | 17/64 | I | 0.544 | 5/8 |
# 18 | 0.294 | 0.298 | 3/16 | 10 | 9/64 | 29 | 19/64 | N | 0.635 | 5/8 |
# 20 | 0.320 | 0.324 | 7/32 | 3 | 5/32 | 26 | 21/64 | P | 0.650 | 3/4 |
# 24 | 0.372 | 0.376 | 1/4 | D | 11/64 | 18 | 3/8 | V | 0.762 | 3/4 |
Standard Wood Screw Sizes and Predrilling Recommendations |
||||||||||||||||||||||||
Screw Size (Gauge) |
#2 |
#3 |
#4 |
#5 |
#6 |
#7 |
#8 |
#9 |
#10 |
#12 |
#14 |
#16 |
#18 |
|||||||||||
Head Bore Size |
Actual Head Size |
11/64 |
13/64 |
15/64 |
1/4 |
9/32 |
5/16 |
11/32 |
23/64 |
25/64 |
7/16 |
1/2 |
35/64 |
39/64 |
||||||||||
Min. Counterbore Dia. |
1/4 |
1/4 |
1/4 |
1/4 |
5/16 |
5/16 |
3/8 |
3/8 |
7/16 |
7/16 |
1/2 |
9/16 |
5/8 |
|||||||||||
Recommended Size |
1/4 |
5/16 |
5/16 |
3/8 |
3/8 |
3/8 |
3/8 |
3/8 |
1/2 |
1/2 |
1/2 |
5/8 |
5/8 |
|||||||||||
Screw Shank - Hole Size |
3/32 |
7/64 |
7/64 |
1/8 |
9/64 |
5/32 |
11/64 |
3/16 |
13/64 |
7/32 |
1/4 |
9/32 |
5/16 |
|||||||||||
Straight Pilot Drill Size |
Hardwood |
1/16 |
5/64 |
5/64 |
3/32 |
7/64 |
7/64 |
1/8 |
9/64 |
9/64 |
5/32 |
11/64 |
3/16 |
7/32 |
||||||||||
Softwood |
1/16 |
1/16 |
1/16 |
5/64 |
3/32 |
3/32 |
7/64 |
1/8 |
1/8 |
9/64 |
5/32 |
11/64 |
13/64 |
|||||||||||
Tapered Pilot Drill Size |
Hardwood |
3/32 |
7/64 |
7/64 |
1/8 |
9/64 |
5/32 |
11/64 |
3/16 |
13/64 |
7/32 |
1/4 |
9/32 |
5/16 |
||||||||||
Softwood |
5/64 |
3/32 |
3/32 |
7/64 |
1/8 |
9/64 |
5/32 |
11/64 |
3/16 |
13/64 |
15/64 |
17/64 |
19/64 |
|||||||||||
Recommended Countersink Number |
C3 |
C4 |
C4 |
C5 |
C6 |
C7 |
C8 |
C9 |
C102 |
C12 |
C14 |
C169 |
C18 |
|||||||||||
|
||||||||||||||||||||||||
Drill Length Recommendations for Countersink/Taper Point Drill Combos |
||||||||||||||||||||||||
Screw Size (Gauge) |
#2 |
#3 |
#4 |
#5 |
#6 |
#7 |
#8 |
#9 |
#10 |
#12 |
#14 |
#16 |
#18 |
|||||||||||
Tapered Drill Size |
3/32 |
7/64 |
7/64 |
1/8 |
9/64 |
5/32 |
11/64 |
3/16 |
13/64 |
7/32 |
1/4 |
9/32 |
5/16 |
|||||||||||
Short Length Drill |
Min. Screw Length |
1/4 |
5/16 |
5/16 |
3/8 |
7/16 |
1/2 |
5/8 |
11/16 |
3/4 |
7/8 |
3/4 |
13/16 |
7/8 |
||||||||||
Max. Screw Length * |
5/8 |
11/16 |
11/16 |
5/8 |
11/16 |
13/16 |
7/8 |
15/16 |
1 |
1-1/8 |
1-1/4 |
1-7/16 |
1-9/16 |
|||||||||||
Regular Length Drill |
Min. Screw Length |
3/8 |
7/16 |
7/16 |
1/2 |
9/16 |
5/8 |
3/4 |
13/16 |
15/16 |
1 |
1-1/8 |
1-1/4 |
1-3/8 |
||||||||||
Max. Screw Length ** |
1 |
1-1/2 |
1-3/8 |
1-3/8 |
1-1/2 |
1-3/4 |
1-7/8 |
2-1/8 |
2-1/4 |
2-3/8 |
2-5/8 |
2-5/16 |
2-11/16 |
|||||||||||
Long Length Drill |
Min. Screw Length |
9/16 |
9/16 |
9/16 |
5/8 |
11/16 |
3/4 |
7/8 |
15/16 |
1-1/16 |
1-1/8 |
1-5/16 |
1-7/16 |
1-9/16 |
||||||||||
Max. Screw Length*** |
1-3/4 |
2 |
1-7/8 |
2-1/8 |
2-3/8 |
2-3/8 |
2-3/4 |
2-3/4 |
3 |
3 |
3-1/8 |
3-1/16 |
3-3/16 |
|||||||||||
8” Long Drills |
Min. Screw Length |
N/A |
N/A |
N/A |
3/4 |
13/16 |
1 |
1-1/16 |
1-3/16 |
1-1/4 |
1-1/4 |
1-1/2 |
1-5/8 |
1-3/4 |
||||||||||
Max. Screw Length*** |
N/A |
N/A |
N/A |
4-3/4 |
4-3/4 |
4-3/4 |
4-3/4 |
4-3/4 |
4-3/4 |
4-3/4 |
4-3/4 |
4-11/16 |
4-11/16 |
|||||||||||
* = 1/2” to 3/4” of shank for chucking ** = 3/4” to 1” of shank for chucking *** = Set screws positioned at end of twist |
Diameter |
Common Lengths | Clearance Hole | Pilot Hole | ||||
Gauge | Metric | Imperial | Metric | Imperial | Metric | Imperial | Metric |
2 | 2.0 | 1/4 - 1/2 | 6.5 - 13 | 3/32 | 2.5 | 1/16 | 1.6 |
3 | 2.5 | 3/8 - 1 | 10 - 25 | 7/64 | 3.0 | 1/16 | 1.6 |
4 | 3.0 | 1/4 - 11/2 | 6.5 - 38 | 1/8 | 3.5 | 5/64 | 2.0 |
6 | 3.5 | 3/8 - 21/2 | 10 - 65 | 5/32 | 4.0 | 5/64 | 2.0 |
8 | 4.0 | 3/8 - 31/2 | 10 - 90 | 3/16 | 5.0 | 3/32 | 2.5 |
10 | 5.0 | 1/2 - 4 | 13 - 100 | 7/32 | 5.75 | 1/8 | 3.5 |
12 | 5.5 | 3/4 - 5 | 19 - 125 | 1/4 | 6.5 | 1/8 | 3.5 |
14 | 6.5 | 11/4 - 6 | 32 - 150 | 1/4 | 6.5 | 5/32 | 4.0 |