K. P. Enterprise

Palanpur, Banaskantha, Gujarat

Features

• Designed to perform all routine tests such as PT, APTT, TT,
• FIB and clotting factors
• Results are both printed and displayed in seconds and in concentration
• Data is printed and stored with RATIO and INR values
• Dry block incubator for 37 degree centigrade with multi timer
• Uniform mixing of Sample & Reagent with magnetic stirrer
• Automatic sensing of cuvette insertion
• Automatic sensing of dispensing of Reagent that triggers the reaction
• Facility to enter clinic name
• Prints and stores calibration graph

Features

• Specially designed Manifold assembly to prevent any scratching on bottom of well
• Auto rinse facility while shut down
• Continuous aspiration to prevent overflow
• Removable manifold
• Built-in stabilizer
• Ability to wash single strip of 8 wells
• Auto detection of bottom of well and collision prevention
• User programmable soak time, wash cycles and dispensing volume
• Waste bottle full warning with audible alarm
• On Board two plate incubator at 37 °C with programmable timer

Features

• Direct access to more than 200 tests through test keys
• Maintenance free peristaltic pump
• Unique circuitry for long lamp life
• Triple cuvette system
• Real time graph with online reading
• Multi standard calibration & memory
• Automatic calibration against standard
• Displays actual temperature on screen
• Levey jennings and standard deviation graphs
• Sample carry over prevention facility
• Robust system with built in stabilizer
• Patient report with PIO & name
• User friendly software
• USB interface

Technical Specification

Optical System

• Linear measurement range : 0.000 to 3.000 absorbance units (A)
• Photometric accuracy : ± 2 % or 0.007 whichever is higher,
• from O to 1.5 A, ± 3 % from 1.5 A to 3.0 A
• Optical measurement : Photodiode
• Light Source : Tungsten halogen

Filters

• Type of filter : High quality narrow band interference
• Wave length : 340, 405, 510, 546, 578, 630 nm & two optional

Flow Cell

• Sipping volume : upto 1000 μI
• Triple cuvette system :
• 18 μI flow cell
• 10 mm square cuvette
• Round tube for coagulation

Memory

• Open tests : 250 tests
• Results : 2500 patient results
• QC : 30 QC results/test

Analysis Modes

• Biochemistry & Turbidimetry : Absorbance, End Point, Fixed Time, Kinetic, Differential & Ratio
• Coagulation : PT, INR & APTT

Display

• Human machine interface : TOUCH PANEL/ KEYPAD 5" Color Graphics LCD

Reagent Tray

• 26 Open positions
• 13 Positions for 10 ml bottles
• 13 Positions for 30 ml bottles
• 0 Reagent tray cooled to 10 to 15 C below the ambient temperature

Reagent Probe

• Reagent probe volume 50 to 500 μl
• Preheated probe with liquid level detection
• Probe cleaning : both internal and external

Sample Tray

• 26 Open positions for sample/standard/calibrator/control
• Can adapt primary tubes and pediatric sample cups
• STAT sample priority

Sample Probe

• Sample probe volume 2.5 to 30 μl
• Probe with liquid level detection
• Probe cleaning : both internal and external

Reaction Tray

• 50 disposable cuvettes
• Reaction volume : 200 μl / test
• Reaction temperature controlled at 37°C + 0.5°C

Quality Control

• Levy Jenning (L-J) Graph
• Westgard Rules
• Quality Control
• Pediatric Cup for Q. C.

Cuvettes

• Disposable cuvettes
• Easy loading cuvettes
• Ten cuvettes in each sector
• Optically matched cuvettes

Software Features

• Windows based user friendly operation
• Online status of reagent, sample, and reaction system
• Real time monitoring of reaction curves
• Real time diagnosis of system status

Turbidimetric Reagents With Smart Calibration Key

• Test HbA1c, CRP, RF and ASO in a Cost Effective Way
• No calibration required
• Saves time & money and avoids errors of calibration
• Great accuracy & precision

Reagent Features

• Ready to use liquid stable reagents with long shelf life
• Two reagent system
• Fine micro size latex particles that do not settle down
• Micro volume reduces cost per test
• Reliable results correlating with gold standard methods
• Convenient pack size

Features

• Discrete, Random Access, Fully Automated, Compact, Bench Top Model
• 100 Tests/Hour Throughput
• Dual Probe, Individual Probes for Sample and Reagent
• Automatic Probe Cleaning and Liquid Level Sensing
• Cooled Reagent Compartment
• Q.C. with L.J. Plot and Westgard Rules
• STAT Sample Capability
• Disposable Cuvettes
• Built in Computer
• Non Vacuumised Waste/Wash Bottles

Technical Specifications
System Information

• Type of Tests : Routine & Special Biochemistry Enzymes, Substrates, Drug Assays, Serum Proteins
• Analysis Mode : End Point, Fixed Time, Kinetic, Linear/Non-Linear Multipoint Calibration
• Programming : Open System for User Defined Profiles and Calculations

Optical System

• Absorbance Range : 0.000 to 3.000 Abs. Unit
• Filters : Interference Filters 340, 405, 450, 510, 545, 578, 630, 700 nm + 2 Optional

Features
Coagulation

• Four independent programmable coagulation channels for faster throughput.
• Display online results of all four channels simultaneously on single screen.
• Designed to perform all routine & special tests such as PT, APTT, TT, Fibrinogen, Factor II, V, VII, VIII, IX, X, XI, XII.
• Uniform mixing of Sample & Reagent with magnetic stirrer.
• Automatic sensing of sample/reagent dispensing to start the measurement.
• Multipoint Calibration curve with user entered standard dilution % in FIB and Factor Assay.

Photometer :

• Independent channel for Photometric assays.
• Multipoint calibration curve with maximum 7 calibrators for Photometric assays.
• Chromogenic assays antithrombin III (AT-III), protein C (PC), protein S (PS), D-dimer.

Common :

• Effective temperature regulation system.
• Robust system with built in stabilizer.
• Storage Capacity of 250 open tests with QC and more than 2500 results.
• Independent memory for Coagulation and Photometric mode.
• Unique circuitry for long lamp life.
• Human machine interface : Touchpad, Keypad.
• Quality Control with Levey Jennings and standard deviation graphs.

Technical Specifications
Coagulation

• Measuring System: Photometric / Mechanical
• Optical Measurement: Photodiode
• Measuring Volume: 150 μl
• Sample & Reagent Mixing: With Magnetic Stirrer
• Dry Block Incubator : 24 Positions Temperature at 37 c
• Light Source: LED
• Analysis Mode: PT, APTT, TT, Fibrinogen, Factor Assay (Factor II, V, VII, VIII, IX, X, XI, XII)
• Results Displayed in: Seconds, Ratio, INR, Concentration and %

Photometer :

• Linear Measurement Range : 0.000 to 3.000 Absorbance Units (A)
• Photometric Accuracy : ± 2% or 0.007 Whichever is Higher, From 0 to 1.5 A, ± 3% from 1.5 A to 3.0 A
• Optical Measurement : Photodiode
• Cuvette Volume : 500 μl
• Filters Interference : 405, 630 nm
• Light Source : Tungsten Halogen
• Warm Up Time : 90 Seconds
• Analysis Mode : Absorbance, Kinetic, End Point, Fixed Time

Features

• Accommodates different microplate geometries U, V & Flat
• Plate shaking facility with variable speed and duration
• Ability to read plate within seconds
• Digital light control with unique circuit for long lamp life
• Bichromatic readings
• Flexible controls and calibrators positioning
• Storage of calibration curves & controls
• External printer connectivity
• Patient report with PID & name
• Various Graph curve fit mode : Linear, Point to Point, 4 parameter log regression, Cubic Spline, Polynomial with scales such as Log Abs / Conc, Logit Abs / Log Conc, Abs / Conc, Log Abs / Log Conc etc.
• Matrix mode for result printing
• Storage of plate results
• Data transfer to computer with easy view of results in Excel format

Technical Specification

Optical System

• Linear measurement range : 0.000 to 3.500 absorbance units(A) 
• Photometric accuracy : ± 2 % or 0.007 whichever is higher from 0 to 1.5 A, ± 3 % from 1.5 A to 3.5 A
• Drift : <0.005 A/hr
• Resolution : 0.001
• Light source : Halogen

Filters

• Type of filter : High quality narrow band interference
• Wavelength : 405, 450, 492, 630 nm & two optional
• Half bandwidth < 10 nm
• Selection : Automatic by stepper motor

Memory

• Programs : 250 tests
• Results : 9600 patient results retrieval Assay wise, Patient wise

Printer : On board thermal 52 columns, maintenance free

Display : Human machine interface : TOUCH PANEL & KEYPAD, 7" Graphics Color Display

Power : Voltage : 115 — 230 Volts ± 10%, 50 — 60 Hz

Computer Interface

• RS232 Serial Port : 9600 baud, 8 data, 1 stop, no parity bits
• USB

Analysis Modes : Absorbance, Cut-off, Multi-standard, % Absorbance, Single standard, Uptake, Ratio

• Curve Plotting : Graphical representation on printer & display
• Plate Carrier Movement : Precisely through stepper motor
• Dimensions in mm (Ixbxh) : 405 x 380 x 280 (Approx)
• Weight : 10 kgs. (Approx)

Our new generation priecount with simplified operation and precise dilutor technology ensures results are of highest quality.

Features

• Intuitive Software
• Low consumable cost
• Accurate measurement of sample by volume and time method
• Floating discriminator
• Innovative technology
• High precision maintenance free dilutors
• Easy operation and maintenance
• Accurate and reliable results
• Liquid level sensor for Diluent, Lyse and Rinse bottles

Whole Blood Linearity Range

• WBC 0.2-99.9 x 10 /μl
• 6 RBC 0.30-7.00 x 10 /μl
• HGB 0.1-25.0 g/dl
• 3 PLT upto-999 x 10 /μl
• HCT 10.0-60 %

Operating Conditions
Power

• 115 – 230 Volts AC 50 Hz +/- 10%
• Proper Earthing / grounding <5 Volts
• Power 100 VA

Environmental
Temperature

• 18 to 40 ° C
• Relative Humidity up to 80%

Features

• Discrete, Random Access, Fully Automated, Compact, Bench Top Model
• Dual Probe, Individual Probes for Sample and Reagent with Liquid Level Sensor
• Onboard Cooling for Reagent Tray
• Onboard Laundry
• Minimal Water Consumption, less than 2 Litres per Working Hour
• Permanent Optical Glass Cuvettes
• Non Vacuumised Waste/Wash Bottles
• Q.C. with L.J. Plot and Westgard Rules
• Dedicated Onboard Mixer for R1 & R2
• STAT Sample Capability
• Built in Computer