Ahmedabad, Gujarat, India
Our Products
| Features : |
| -JMK Planers are designed for vibration free performance & heavy duty cutting -ISO Grade 20 castings Strongly Ribbed -Bed castings box type, columns ribbed to take heavy load -Available in different models Light duty, Medium Duty, Heavy duty to suit different applications -Automatic Lubrication of guideways provided -All gears and rack of steel (optional) -Bed guideways one Vee one flat or two Vee (optional) -Moveable parts having gunmetal bushes |
| Table Insert |
| Standard Accessories : |
| Double tool post on cross railAutomatic LubricationManual Lifting of cross rai |
| Optional Accessories: |
| Extra tool holderSide tool holderAutto lifting and lowering of cross rail3 speed gear boxSpeed reduction gear boxMilling AttachmentGrinding attachmentRapid operation of tool post. |
| Notes:Planners can be manufacture upto 40' length.Design and specifications subject to alternation without Notice . |
| Features : |
| -JMK Plano Millers are designed for vibration free performance & Heavy Duty Cutting |
| Specification | Unit | JMK PML | JMK PMM | JMK PMH |
| Working Capacity | ||||
| Milling Length Min/Max | M | 2.5/6.5 | 3.0/8.0 | 6.0/12.0 |
| Milling Width | MM | 1500 | 2000 | 2500 |
| Milling Height | MM | 1500 | 2000 | 2500 |
| Table | ||||
| Width | MM | 1200 | 1500 | 1800 |
| T-Slot | MM | 28 | 28 | 28 |
| Feed (6 Nos) | MM/MIN | 25-500 | 25-500 | 25-500 |
| Bed Length Min/Max | M | 5/13.0 | 6.0/16.0 | 12.0/24.0 |
| Column Face | MM | 400 | 450 | 600 |
| Cross Rail Face | MM | 450 | 500 | 600 |
| Milling Head | ||||
| Quill Diameter | MM | 200 | 250 | 300 |
| Taper in Spindle | ISO | 40 | 50 | 50 |
| Quill Travel (Manual) | MM | 125 | 150 | 150 |
| Cross Rail Head Swivwlling | Deg. | 45 | 9 | 9 |
| Speeds | Nos | 6 | 9 | 9 |
| Range | Rpm | 50-350 | 50-380 | 40-300 |
| Column Head Travel above | ||||
| Table Top | MM | 1200 | 1700 | 2200 |
| Milling Head Motor | HP | 7.5 | 10.0 | 15.0 |
| Power | ||||
| Table | HP | 7.5 | 10.0 | 20.0 |
| Milling Head | HP | 7.5 | 10.0 | 15.0 |
| Cross Rail Travel | HP | 3.0 | 5.0 | 5.0 |
| Rail Head Cross Feed | HP | 3.0 | 5.0 | 7.5 |
| Column Head Vert. Feed | HP | 3.0 | 5.0 | 7.5 |
| Overall Dimensions | ||||
| Length Min/Max | M | 7/17 | 9/20 | 16/30 |
| Width | M | 4.4 | 5.2 | 6.0 |
| Height | M | 4.2 | 4.8 | 5.4 |
| Weight Min/Max | T | 12/18 | 20/40 | 50/80 |
| Features : |
| -IS, Grade 20 casting, heavy ribbed, slopping ribb design providedfor easy disposal of chips. -Extra heavy duty head stock for vibration free performance. -Head stock available in bearing and heavy brass bush. -All geared headstock can also be provided. -Alloy steel spindle with P.B. bushes in head stock drum forsmooth operation on heavy cuts. -Heavy duty guides can be provided to suit clients requirements. -Roller supports provided to suit clients requirement of different rolls. -For extra heavy job revolving tailstock with dog chuck can be provided. -Individual motor drive attachment. |
| Table Insert |
| STD ACC. : |
| Catch Plate, Face Plate Steady Rest, Follow Rest, 2 M.T. Centres (hardened and ground) one set of 22 changewheels machine cut, and Thread dialguage, Motor Bracket/ Motor plate, Pulley. |
| Optional : |
| Machine lamp, Steel gears in Headstock with PB Bush, All geared Headstock, Dog Chuck with coupling, True Chuck with coupling, Heavy diameter Face Chuck and Face Plate, Electricals, Rapid Traverse, Coolant equiment with fitting, Roller type Steady Rest, Taper turning attachment, Revolving Centre Netric Gears. |
| Notes:The Design and Specifications are subject to alternation without notice. Lathe in above models can be provided up to 40'. Spindle hollow and width od gap can be increasedas per requirement. |
