Karaavali Switchgears

Baikampady, Mangalore, Karnataka

The Current and Potential Transformers used in these panels are Accuracy tested at KPTCL / National Accredited testing laboratory. Load Break Switch 630A, 26.3KA, triple pole, spring assisted hand operated type with quick break contacts. With earth - switch and interlock, as per IS-9920, IEC265. HT HRC fuses of suitable rating (Access to the HT Fuse chamber is possible only after switching OFF the LBS) The Instrumental Current Transformer (Resin cast) CL:0.5 Confirms to IS:2705. The Insulation Level is 15/35/95kV The Potential Transformer (Resin cast) CL:0.5 Confirms to IS:3156. The Insulation Level is 15/35/95kV The Electronic Trivector Meter CL: 0.5 Test Terminal Block 3Ph. 3 Wire Front Connection Sealing Facility Provided as per EB norms Since mos these panels are installed outdoor, these are developed to be sturdy and resistant to varying ranges of temperature, which confirms to IP55 asper IS/IEC 60947-1-2004.

Metering Cubical with Load Break Switch 630A, 26.3KA / VCB with Current sensor operated over current & Earth Fault Relay HT HRC fuses of suitable rating (Access to the HT Fuse chamber is possible only after switching OFF the LBS) Sealing Facility Provided as per EB norms.

We are one of the distinguished manufacturers of Motor control centre (MCC) panels. These have the capacity to feed larger loads and are designed as per the client specifications. These are used for controlling, monitoring and regulation of various types of motors. Our manufactured motor control centre (MCC) units comprises equipments like; various types of starters, soft starters, variable frequency drives, solid-state motor controllers with analog / digital metering, feeder circuit breakers, capacitor feeders etc. our products are widely demanded in various industries like chemical refineries, pharmaceuticals, textiles, construction, paper and others.

Feeder Pillars are connected to the distribution board and mainly utilized for housing and street lighting units. The feeder pillars are widely installed for Industrial, Township, Housing Societies, and Lighting applications. Our Distribution Feeder Pillars can be customized for power distribution applications.

Automatic Power Factor Control Panels are installed to maintain the power factor in the desired range. These are incorporated with advanced microprocessor relays to ensure accurate power factor correction. Design facilities easy connection, ample space for capacitors, efficient heat dissipation, and protection against re-energisation of capacitor bank before it is fully discharged. Manufactured using best quality material, our panels are appreciated for easy installation, safe usage and low maintenance. APFC Panels with capacitors are also optionally equipped with series reactors for minimizing harmonic current which may alter system voltage & current.

Auto Main Failure Panels, also known as AMF panels, are used to automatically changeover from mains electricity supply to stand-by generator or gen set on failure of the mains supply. When the mains supply is restored, the system automatically changes back and stops the gen set. The stand-by generator will be eventually shut down after a short cooling down period. We manufacture and supply AMF (Auto Mains Failure) Panel as per the specific requirements of the clients. These panels are used for controlling power supply in various industries like processing plants, hospitals etc. On the request of the clients, we customized these panels (both automatic and manual modes) to meet client-specific requirements. This kind of mechanism reduces the time generally taken to manually switch in or out of DG sets. It can even ensure constant flow of process in case of a power failure or fluctuation.