Write a Review
Our Products
We are leaders in the market for providing best range of Edge-Tension Wound finned Tube and LL - foot Tension Wound finned Tube
Kasera Fin Tube offers our standard Edge-Tension fin tubes available in similar or dissimilar metals. Edge tension finned tubing is recommended for moderate duty in normal ambient air applications and on most low-temperature air cooled heat exchangers. During the manufacturing process, fin material is tightly wound around the outside of the tube to secure metals-to-metal contact of the base of the fin with the tube.
| Tube/Pipe Size | 25MM to 350MM outside diameter |
| Fin Height | 10 to 50 MM |
| Fin Thickness | 0.8 to 3.5 MM |
| Fin Pitch | 4 MM to 50MM |
| Fin Materials | No theoretical limit |
| Tube Length | No practical limit |
| Operation | Fully automatic |
Kasera Fin Tube offers LL-Foot Tension Wound Finned Tubes. Manufactured in the same way as the 'L' fin type except that the fin foot is overlapped to completely enclose the base tube thereby giving excellent corrosion resistance. This type of tube is often used as an alternative to the more expensive extruded type fin in corrosive environments. If say in simply- Aluminium fin strip is formed to LL shape and tension wound on the tube with overlapping of fins as shown in the figure.
| Tube/Pipe Size |
10 MM to 200 MM outside diameter |
| Fin Height | 8 to 50 MM |
| Fin Thickness | 0.4 to 1.2 |
| Fin Pitch | 2 to 20 MM |
| Tube Materials | No theoretical limit |
| Fin Materials | Aluminium or copper |
| Tube Length | 15 Meter |
| Operation | Fully automatic |
Ajay Kasera (Kasera Fin Tube)
Shree Nath Tower, Near Gayatri Ashram, Ajmer Road, Bhilwara - 311001, Rajasthan, India
Share us via
