Product / Services
Post Buy Requirement

My ExportersIndia

For Buyer

For Seller

For Help

Kasera Fin Tube

Kasera Fin Tube
location Ajmer Road, Bhilwara, Rajasthan

Write a Review
Call Now Call Now

Our Products

  1. Heat Exchanger Parts 7 Products available
  2. Heating Coils 2 Products available
  3. Welded Pipes 2 Products available
  4. Heaters, Thermostats & Heating Devices 2 Products available
  5. Radiators & Radiator Accessories 2 Products available
  6. Auto Radiator 2 Products available
  7. Industrial Plastic Pipes 1 Products available
  8. Cooling Tower, Heat Exchanger & Parts 1 Products available
  9. Heat Exchangers 1 Products available
  10. Domestic Fans, AC & Coolers 1 Products available
  11. Others Products 1 Products available

Heating Coils

We offer the best product range of INTEGRAL LOW FIN TUBE and Wire Wound Finned Tubes.

INTEGRAL LOW FIN TUBE

INTEGRAL LOW FIN TUBE
  • Tube/Pipe Size 12.7 MM to 25.4 MM outside diameter
  • Fin Height 0.56to 1.25 MM

Kasera Fin Tubes can offer substantially reduce the cost of Heat Exchangers and at the same time improve their efficiency through the use of a simple tool often overlooked by designers the integrally finned tube. Kasera low fin tubes can be ordered bent into U-tubes if required. Integral Low Fin Tube has the advantage that it can improve the thermal performance of a Heat Exchanger without the necessity for changing shell size, flow arrangement or the repositioning of piping. The external surface of the tube is increased by the formation of "low fins" by direct extrusion from the material of the base tube. In general, for a given heat transfers only one half of integral fin tubes are needed as would be required for bare tubes. This effectively saves more than 30 percent on tubes alone.

 

Tube/Pipe Size

 12.7 MM to 25.4 MM outside diameter
Fin Height 0.56to 1.25 MM
Fin Per Inch 16 FPI to 45 FPI
Materials Stainless Steel: 304, 304L,316,316L and 321 plusDeplex,
Copper Base Alloys: i.e.Alloy 443,687,706,715,
Carbon & Low Alloys Steel, Titanium & Hi Ni Alloys
Tube Length No practical limit
Operation Semi automatic


View Complete Details
Ask Latest Price & Details
Wire Wound Finned Tubes

Wire Wound Finned Tubes
  • Fin Height 5 to 25 MM
  • Wire Thickness 0.5 to 1 MM
  • Fin Per Inch 2 FPIto 8 FPI
These finned tubes have fins made of wire instead of strips. Continuous loops of wire are formed and are continuously soldered to the circumference of the tube to ensure 100% contact. Loops per turn and turns per foot can be altered as per surface area requirements. Due to continuous soldering of wire loops these finned tubes offer a very high heat transfer efficiency with less air pressure drop. Used in air cooled Oil Coolers in thermo Pac units and also used for Air Heating applications.We also supply bare tubes with Flexible turbulator inserts inside which are continuously soldered with the inside surface of the tube. These tubes can then be used for further finning by the Customers. This gives maximum turbulation with minimum pressure drop and has proved very effective for charge air coolers and Oil coolers. And gives excellent turbulation but has a higher pressure drop than the flexible type turbulator making it ideal for cooling oils which has low viscosity when hot and flow needs to be slower.
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.