LAB TIGER

Dlf Industrial Area, Faridabad, Haryana

The bursting strength tester Analogue model is a highly preferred tool for testing the bursting strength of various packaging materials such as filter cloth, uneven boxes and boards, industrial fabric, solid boards of fibers, paper boards, leather, Rexene, plastic films, and sheets. The bursting strength test helps in estimation of the quality of the materials and compares it with other similar materials. The bursting strength of the materials is tested against a specific amount of hydraulic pressure applied on the materials. Other models of this instruments are also available that are as follows -DigitalModel, PneumaticModel, Computerized Cum Digital Model with Manual Clamping, Computerized Cum Digital Model with Pneumatic Clamping

It is a reliable index for measuring the strength of various materials and packaging products. The equipment is an ideal lab testing instrument to test the materials for their strength, performance and quality. The machine offers high ease of operation. The instrument is properly calibrated for reliable and accurate results. It is used widely in many industries, education institutions, laboratories etc.

There are two clamps present in the machine that are lower clamp and upper clamp. The test specimen is basically placed between both the clamps for strong hold. Adequate amount of pressure is applied on the specimen to avoid any slippage. The upper clamp has spiral grooves and the lower clamp has concentric grooves. The strength of the material is measured using the testing instrument in two ways that are manual exertion of pressure and automatic exertion of pressure through rubber structure. The area of application of pressure is circular in shape.

When there is application of force, the specimen collapses along with diaphragm. In this way the bursting strength of the material is duly calculated according to the maximum pressure required to be applied on the material for failure. The pressure applied is measured using a Pressure gauge.

Output

The strength calculated through this procedure is used to calculate the maximum weight that the material can bear before failure. This helps the engineers in deciding the factor of safety for the material. The results can be easily viewed and assessed in analogue meters, digital screens and in form of graphs of computer screen.

Features:

• Easy installation
• High accuracy for calculation of bursting strength of a material.
• Highly useful for enhancement of the performance of the products.
• Easy calibration is possible.

Specification:

• The instrument is available with an analogue gauge.
• There are two clamps provided with the equipment that are upper and lower clamps with a diameter of 30.5 mm and 38.1 mm respectively.
• The fluid in the instrument dis-articulates at a rate of 95cc/minute.
• With this instrument a pressure of 35 kg per square centimeter can be applied on the specimen for measurement of bursting power.
• The test fluid that is used in the instrument for creating pressure is glycerin oil.
• There is a reduction type worm wheel gear box provided with the instrument.
• The power needed to operate the instrument is KW and has a motor of HP single phase.
• Related standards- IS1060 Part-I 1987.
• There is stiff base plate of metal used for assembly of the instrument and is given a nice appearance with autumn grey and blue color. The Equipment is provided with chrome plating for protection from rust.
• The equipment comes with an instruction manual, NABL certificates and spare diaphragms.

The touch screen model of Bottle burst tester is an upgraded version of the digital model that is widely used in the industries where PET bottle is used for packaging of highly pressurized aerated drinks. The touch screen model provides highly accurate and reliable test results of the bursting strength of a PET bottle. THE instrument is best for use in bottling plants of aerated and carbonated drinks as well the PET bottles manufacturing plants. Along with thetouch screen model, the bottle burst tester is also available indigital model.

The bottle bursting tester is a widely used testing instrument that is meant for testing the strength of bottles to bear the pressure exerted on then when they are filled with aerated drinks or carbonated drinks. The instrument gives an exact measure of the volume extension and burst strength of the bottles that are used for packaging. It is a highly useful instrument for PET manufacturing industries to check the quality of their products. The instrument is provided with a highly advanced touch screen which makes it highly easy to use. Along with that, touch screen also helps in obtaining highly accurate and reliable results with high rate of repeatability. The instrument is equipped with pneumatic controls along with a buzzing alarm which intimidates the completion of every test procedure every time. The high end computer software provided with the instrument allows the instrument to integrate a computer for extension of more functions. With the USB data interface, the test reports can be easily transferred to the computer for easy viewing.

Features:

• The instrument offers automatic hold and release function which holds and releases the test sample automatically.
• It allows accessing the history of the test conducted.
• Pressure can be adjusted automatically and very easily with the use of HMI touch screen.
• The touch screen model also provides you the test results in graphical format.
• The machine has self-calibration facility.
• It comes with a USB 1.1 data interface which helps in easy transfer of data from the machine to other devices.
• There is an auto buzzer provided with the machine which buzzes every time after the test completes.
• It is incorporated with an 8 HMI touch screen with 65536 colors.
• The touch screen is I complete compliance with Nema4, IP65 standards, CE and UL approved.

Specifications:

• The equipment is best for getting information about the expansion volume and burst pressure of bottles used in industries.
• It is incorporated with a touch screen along Human Machine Interface.
• The equipment has pneumatic controls for easy operation.
• It also has the automatic alarm which buzzes after every test procedure is completed.
• The machine also has a feature to set fixed pressure where the desired pressure can be achieved in a very short time.

RAMP rate software is also provided with the machine along with its hardware.

The melt flow index tester (Deluxe Model) is a significant attribute of any plastic material that can help in determining various chemical and physical properties of the materials. The melt flow index tester is a highly precise and accurate instrument that offers exact and accurate determination of melt flow index of a plastic resin. The melt flow index of a plastic resin is termed as the weight of the resin flowing through a capillary tube every ten minutes under an unambiguous load or shear stress. The test procedure includes passing the molten plastic granules from a capillary tube of specific dimensions. A specified load is applied to the test sample with the help of a piston.Apart from that the following are also available for the customers -Melt Flow Index NXG Model.

The melt flow index tester is used for determination of the melt flow rate of various materials such as plastic granules. It is a widely used product in plastics and polymer industry. The instrument is designed and manufactured as per standards set by ISO and ASTM and is mainly focused on meeting the principal conditions necessary for the test procedure.

The instrument has a PID temperature controller, and its working is based on a microprocessor. The temperature can vary from ambient to 4000C. The resolution of the instrument is also 0.10C and has an accuracy of 0.10C. The apparatus comes with a digital timer that is pre-settable and can be extended to 59 minutes and 59 seconds.

There are standards accessories available with the devices that are a piston, orifice, spanner, funnel, spoon, mirror, plumb line, material charger, barrel cleaners and so forth. The machine is manufactured on a base plate of heavy metal for long life, safety and stability. The tester is in strict adherence to standards of ASTM D 1238-1992. The instrument has a fine finish in grey and blue color. The product comes with a complete user guide and a conformance certificate that can easily be traced to any labs approved by NABL.

Features:

• The instrument is capable of maintaining the accurate temperature needed for the test procedure that ranges from ambient to 4000C.
• The temperature controller used in the machine is PID which is a completely microprocessor based.
• The machine has a high rate of accuracy and repeatability and incorporates a pre-settable timer.
• The instrument has a feature to cut the test samples automatically which makes the results reliable and test procedure easy.
• Additionally, the standard accessories and resources are available with the product.

Box Compression Tester Digital Model is used to measure the compression potency, strength or stacking power of beehive crates, cartons, corrugated boxes, paper cases, paper tanks, etc. The tester is a well-engineered apparatus, designed especially to calculate the load range a box or a carton can bear till complete failure. With this highly accurate and stable testing equipment, it becomes very easy to ensure the highest strength of the corrugated boxes and other packaging materials provided to your customers. Apart from digital model acomputerized cum digital modelof box compression tester is also available for customers.

Box Compression Tester is used to measure the compression potency, strength or stacking power of beehive crates, cartons, corrugated boxes, paper cases, paper tanks, etc. The Box compression tester is a well-engineered apparatus, designed especially to calculate the load range a box or a carton can bear till complete failure. In this procedure, weight of specific range is chosen to completely crush the specimen in a set time period to measure the maximum stacking load.
It is a solid instrument which requires sufficient space in a laboratory to place with user-friendly controls. Cardboard boxes must have sufficient compression strength so that they do not get crushed when stack one above the other at the time of transportation or storage. The compression strength of a carton is gauged simply by placing a test specimen say, corrugated box or carton between two parallel plates. Now set the compression strength and the standard time period from the digital panel to compress the specimen.
Two models of Box Compression Tester are available, namely Digital and Computerized cum Digital Model.
At the time of storage or transportation, cartons and corrugated boxes were placed one above the other which leads to compression. To ensure the safety of the products kept inside the cartons, it is quite important to measure the quality and the compression strength of corrugated boxes. This development toward enhancing the quality of packaging has now-a-days, contributed a lot to safeguard the products during transportation and storage because the concept of plastic wrapping has completely removed.
The compression strength of a product is determined by a number of factors:

• Size and Measurement of the cartons
• Depends on the storage techniques like stacking and various circumstances like climate, etc.
• Material Properties of an object includes stiffness and compression strength.

• The compression strength is measured in the following units:N, lbf or kgf.
• It has Digital display.
• It is operated on a single phase.
• It is solid model, lightin weight, appropriate for stable performance.

• Highly Stable - Designed on heavy duty iron plates.
• Heavy duty assembly with two columns.
• Podium size of the machine is 600mm x 600mm to place the specimen safely.
• Maximum weight that can be exerted on a box can be of 1000kg.
• The least count of the instrument is 500g.
• The power supply required to operate the apparatus is 2.5KW
• The plate of the apparatus moves towards the specimen at a rate of 10+/- 3 mm per minute (where, the HOME location speed is 2 per minute).
• It is incorporated with a motor of 3 HP which operates on a 3 phase power supply.
• It is built-up on a rigid metal base plate.
• The machine is coated with autumn gray and blue combination paint along with bright zinc plating which provides a rust resistant finish.

The testing instrument supplied complete with an Instruction Guide and Electrical Wiring Diagram & along with Calibration Certificate perceptible to NABL approved Labs.

Standard: ASTM, IS, ISO, TAPPI, JIS.

An edge crush tester is an ideal testing instrument that is used for creating testing environments and is used widely in industries such packaging, quality assurance and so forth. The instrument is very useful in determination compressive strength of the sides of solid boxes of fiber as well as corrugated boxes. It is best for performing Edge crush test, flat crush test and ring crush test according to the standards. The testing instrument is specially designed as a table top model and is very user friendly.Apart from that the following are also available for the customers -Crush Tester (RCT/ECT/FCT)-Computerised Cum Digital

The crushing strength of a box is measured as KN per unit length. Edge crush test value is greatly dependent on the bonding of the paste. Higher value of edge crushing force depicts that the box has a high stiffness level. This allows comparing the quality and strength of corrugated boxes. With the ECT, it is possible to find the compressive strength for the box with the use of McKees formula which is given by the following equation.

Features:

• The test results can be read simple and accurately with the help of a digital display.
• The force applied by the machine is measured electronically with the help of a load cell.
• The loading system is electromechanical which assists in easy loading and unloading of the test specimen.
• The electronic controls of the machine are very easy to operate and use.
• There is peak-hold function provided with machines for better competence.

Specification:

• The machine comes with a maximum capacity of 100kilogram force.
• The instrument has a least count of 100g.
• The accuracy of the instrument is 1%.
• The Rate of the machine to perform the test is 12.5 2.5 mm/min.
• The design of the machine completely complies with the standards set by IS: 7063.
• The machine comes with dimensions as follows: L 60cm x W 50cm x H 125cm.
• The unit used for determination of crush resistance is Kilograms per unit length.
• There is a rigid metal plate given with the instrument and has a finish of autumn grey and blue color.
• There is a requirement of 220V single phase AC to operate the instrument.
• The weight of instrument is approximately 93 Kg and it comes with a user manual and a calibration certificate which can be traced to NABL approved labs.