Delhi, India
Verified
Add Review
Our Products
We are involved in offering an exceptional quality range of Thermal Shock Test Chamber. Our clients can avail these chambers in different grades and dimensions as per their requirement and choice. We offer these chambers the market leading prices. These chambers are designed for safe and hassle-free operations. These chambers offered by us features rugged construction, optimum performance, corrosion resistant finish, low power consumption, shock proof and durable nature.
Specifications
| Size | 16 and 27 cu. ft. (450L to 730L) each section |
|---|---|
| Temperature range | Hot Chamber: 50°C to 200°C Cold/Hot Chamber: 0°C to -50°C |
| Internal Basket Dimensions | As per customer’s requirements |
| Heating | Average rate of 1°C / minute (empty chamber). |
| Cooling | Average rate of 0.25°C / minute (empty chamber). |
| Gradient in space | Less than 1.5 °C. |
The Rain Spray Test Chamber is specially designed to determine the suitability of electronic and electrical components used under rain conditions. We are trusted Manufacturer, Exporter and Supplier of Rain Spray Test Chamber from New Delhi, India. Double walled chamber and leak proof design makes the Rain Spray Test Chamber the first choice among customers. Two gaskets, one on the Rain Spray Test Chamber and the other one for leak proofing at the door, are fitted.
Description : The updated model of Water / Rain Spray Chamber specially designed to determine suitability of electronic and electrical components driving under rain conditions.
Interior Inspection LampAn interior inspection light is fixed inside the interior chamber.
Water / Rain Spray NozzlesWater / Rain spray nozzles will be provided as per standard JSS 55555 to give the water/rain rate of 4 to 10 mm/minute. Four nos. of nozzles at the top Four Corners included 45° and four nos. nozzles in the centre of each four sides. The distance of the nozzles can be adjusted from the test specimen if required.
Pressure Gauges Separate pressure gauge will be provided for each spray nozzle, for indicating the pressure of the nozzles at the nozzles. The pressure gauges will be mounted on the panel and equivalent length of copper tubing which run to the nozzle end and the gauges will be calibrated accordingly.
ChamberThe chamber will be provided with a cylinder in the centre with 8 nos. of sockets, which will be connected to the nozzle. The cylinder will be fed through a suitable pump to create the sufficient pressure with by-pass valve and the main valves will control the pressure in the cylinder which in turn controls the pressure at the nozzle tips. All the connections will be provided with compression fitting for leak proofing. The same water will be recirculated.
Control Panel & WiringAt the right hand side or at the Top of the Chamber, a control panel will be fixed with all the controls, switches, fuses, contactor assemblies and indicating lamps etc. All the channel type wiring will be as per IS Code for suitable current rated copper wires.
Safety Protection
Specifications
| Size | :900 x 900 x 1000 mm or Any Size per Customer's Requirement |
|---|---|
| Working Volume | 0.8 Cubic Meter. |
| Showers/Nozzles | 8 Nos. |
| Pressure Gauges | 8 Nos. |
| Pressure Regulator | 1 No. |
| Working Pressure | 2.5 Kg/cm² |
| Indicator | Elapsed Time Indicator |
| Power Supply | 220/415 Volt, AC, 50Hz |
| Door opening | From front side |
| Pressure | Pressure will be variable from 1 to 3 kg/cm² at each shower |
| Water Flow Rate | 25 to 40 l/min |
| Precipitation Rate | Precipitation Rate of Water Spray will be 2.5 mm/min. |
Standard: As per IS-9000 (Part XVI)-1983 & JSS 55555
Rotating Table (Optional) : Rotating table of 60cms Ø will be provided at the centre with geared motor with fixed rotational movement of 3-5 rpm..
Our Accelerated Curing Tank features accelerated curing and large capacity. Our company is a distinguished Manufacturer, Supplier and Exporter of Accelerated Curing Tank from New Delhi, India. The offered Accelerated Curing Tank consists of a rectangular double walled metal cabinet; its inside is lined with stainless steel while outer surface is powder coated. The enhanced curing in the Accelerated Curing Tank is obtained using the boiling water method.
Cube Moulds For 15 Cm/7.6 Cm
| A. | For 6 cube moulds |
|---|---|
| B. | For 12 cube moulds |
| C. | For 24 cube moulds |
| D. | For 27 cube moulds |
| E. | For 36 cube moulds |
| F. | For 48 cube moulds |
| G. | For 60 cube moulds |
| H. | For 72 cube moulds |
Extensively used for endurance testing in the automobile industry, our Hot and Cold Test Chamber has huge demand in both the national and international market. The company stands tall among the best Manufacturer, Exporter and Supplier of Hot and Cold Test Chamber from New Delhi, India. Control panels are provided at the top of the Hot and Cold Test Chamber with all the required accessories. Customers can buy the Test Chamber at market leading rates.
ConstructionThis is double walled cabinet insulated with 125mm thick puff / fiber glass insulation between interior and exterior walls. Outer chamber made of Mild Steel/Stainless Steel and painted in Epoxy Powder coating in different color. The inner chamber shall be made of Stainless Steel 304 grade. Outer double walled metal door with GASKET and lock & key. The chamber will have strong base for fitting your fixture. This chamber shall be supplied with PID temperature controller. It will incorporate one compressor/double compressor cascade with all its protective devices along with two fan cooled condensing coil just below the working chamber. This chamber will have air circulating fan from the back of the cabinet. The chamber will have 3” diameter hole from one/both side for feeding cables. Control panel shall be provided at the top of the chamber with all required accessories.
Usage of Machine : Machine is used for endurance testing in Automobile Industry.
Specifications
| Performance | As per IS: 9000, JSS: 55555 & JSS: 50101. |
|---|---|
| Work space | As per Customer's Requirement |
| Temperature range | - 50°C to 200°C or As per Customer's Requirement |
| Heating | Average rate of 1°C / minute (empty chamber). |
| Cooling | Average rate of 0.25°C / minute (empty chamber). |
| Gradient in space | Less than 1.5 °C. |
For immaculate and easy to use Dust Test Chamber, you can completely rely on us. We are reputed Manufacturer, Supplier and Exporter of Dust Test Chamber from New Delhi, India. The construction of the Dust Test Chamber is designed to avoid direct radiation of heat on the test specimen. The floor of the Dust Test Chamber ensures that the dust falls in to the hopper for recirculation. Customers can avail the Chamber at competitive rates.
ConstructionThe construction of the Chamber will be such to avoid direct radiation of heat on the test specimen. The floor of the chamber will be so designed as to permit the dust fall in to the hopper for recirculation of supporting specified load of the floor area.
Exterior Chamber : Will be made of 18 swg CRC M. S. Sheet with 3 coats of paint or 18 swg Stainless Steel
Interior Chamber : Made of 18 swg Stainless Steel
Heating SystemFor temperature uniformity in the chamber, low surface loading sealed tubular heaters will be provided as per IS 4159. The heaters will be fixed in conditioning space in the chamber duly baffled to avoid direct radiation.
Heat Input Controlling : Through Solid State Relay proportional control for heating.
Dust Agitating Mechanism
InstrumentationSolid State Digital Temperature Controller-cum-Indicator will be provided with PT-100 Temperature Thermocouple.
Control PanelSeparate Control Panel on top of the Chamber will be provided with Contactors, On/Off Switches, Fuses, and Indicating Lamps.
WiringThe wiring, will be channel type with suitable current rated copper wire as per, IS Code.
Safety Protection
Specifications
| Temp. Range | Amb. +5°C to 55°C ±1°C (OR As per Customer's Requirement) |
|---|---|
| Gradient in Space | Less than 1.5°C |
| Insulation | 75 mm Thick Puff Insulation |
| Door | Double walled full front opening door, insulated with interior Stainless Steel lining. |
| Gasket | To avoid leak proofing, the chamber will be provided with gaskets for the Chamber and for the Door. |
| Mounting Trolley | Mounting Type Trolley with Casters for Portability will be provided. |
| Hinges & Latches | Heavy duty Hinges with Toggle Type Locking Arrangement. |
| Power Supply | 220/415 V, Single/Three Phase Neutral, 15/30 amp. |
| Size | 0.8 cubic meter-As per Standard (OR As per Customer's Requirement) |
| Standards | JIS-D 0207, IS-9000 Part XII-1981 or both can be combined |
Pressure Vacuum will be provided in the Dust Spray Chamber.
Provision of using, either Fan or Vacuum or Both can be used at a time, will be provided.
The updated models of Salt/Cass Fog Test Chamber specially designed for evaluating the corrosion resistance of the surface treatment of metallic materials by Copper Accelerated Acetic Acid Salt Spray Test Method. It consists of following parts.
Test Chamber :It consists of Cabinet and Lid and is constructed with insulated double structure made of FRP Moulded Sheet. The upper part (triangular shaped lid made of FRP with acrylic glass window) has sufficient space for the mist to accumulate naturally on it and is so shaped that drops so accumulated do not fall on specimen being tested.
Air-Saturator :It is provided to supply heated and humidified clean air, over 90% RH, for Atomization of the solution. It consists of Body (made of stainless steel), Heater, Bubbling Nozzle, Air Cleaner & Pressure Regulator.
Air Regulator :The Air Regulator will maintain a constant pressure of Air at 70 to 170 Kpa.
Air Filter :The compressed air will be passed through a Filter Arrangement to remove all traces of oil and solid matters before sent to the saturation tower.
Lid Sealing :Lid Sealing through Water Seal Method.
Mist Dispersion Atomizer :Atomizer made of Acrylic Glass will be equipped in the Chamber having property of non-choking. It produces a mist of atomized solution, which is distributed uniformly throughout the exposure zone by means of Mist Dispersion Atomizer incorporated with a baffle to prevent dispersion of large liquid droplets. Compressed Air and Gravity Process will help for creation Fog through Atomizer.
Heating System :The Temperature within the Chamber maintained by Heater with Blower System, which provided in-between the Exterior and Interior walls.
Solution Supply Tank :Solution Supply Tank will be provided to supply solution to Mist Dispersion Tower and will be made of FRP Moulded Sheet.
Mist Collector :Two Mist Cylinders are provided for measurement mist quantity. Each has 80 cm² of horizontal area. The condensate is collected in individual graduated cylinders.
pH Indicator :pH Indicator is inbuilt in Control Panel.
Control Panel :Separate Control Panel will be provided located on the Trolley.
The Control Panel will house :
Material :Control Panel, Stand and the Chamber containing other accessories of the Equipment will be made of Stainless Steel 304 grade.
Wiring :All wiring will be as IS code. Channel type wiring will be done with suitable current rated copper wires.
Power Supply :
220/240 V, 50 Hz, Single Phase, AC Mains.
Safety Device :
Pre Installation Facilities to be required at user’s premises :
Standard Accessories
| a) S. S. Rod with PVC coating | - 5 pcs. |
|---|---|
| b) Measuring Cylinder | - 12 nos. |
| c) S. S. Hanger | - 15 pcs. |
| c) EPT Tube | - 1 Mtr. |
Performance
| Test Temperature : | 35°C to 50°C |
|---|---|
| Test Accuracy : | ±1°C. |
| Relative Humidity : | 90% to 98% will be maintained during the Salt Spray with saturation of Salt Solution |
| Humidity Indicator : | RH Indicator will measure 90% to 100%. |
| Mist Collection : | 1-3ml/80cm²/hour at the same position as specimen to be tested |
| Mist Pressure : | 0.8-1.8Kg/cm². |
| Model No. | Internal Volume | Internal Size |
|---|---|---|
| 1. LABIN-PRS-66-0.2 M³ | 0.2 Cubic Mtr(202 litres approx.) | 750 x 600 x 450 mm |
| 2. LABIN-PRS-99-0.4 M³ | 0.2 Cubic Mt (405 litres approx.) | 900 x 750 x 600 mm |
| 3. LABIN-PRS-99-0.45 M³ | 0.45 Cubic Mt (405 litres approx.) | 900 x 900 x 600mm |
| 4. LABIN-PRS-99-1.00 M³ | 1.00 Cubic Mt (1000 litres approx.) | 1000 x 1000 x 1000mm |
| Standards : | IS - 6910, ISO - 3768 Part-I, ASTM - B - 117 - 73, ASTM - B - 368, DIN - 50021, JIS - 2371 | |
| No. of Atomizer : | ||
| 02 nos will be equipped in LABIN-PRS-99-1.00 M³ Model | ||
| 01 no in all other Models. | ||
Other Models Of Salt Spray Chambers (For In-house Testing)
| Temperature Range | From ambient to 35°C ± 2°C. |
|---|---|
| Humidity Range | Upto saturation limit |
| Control of Temp. | Digital temperature controller-cum-indicator of set and actual values. |
| Testing Chamber | Acrylic glass of 8 mm thickness, nozzle made of acrylic glass with drains and exhaust arrangement. |
| Heating | SS Heating element, single phase fitted in the salt mist chamber. |
| Solution Container | Salt Solution Tank made from fiberglass, double walled capacity 35ltrs approx. with provision for water level indicator and float valve, drain valve, inlet & outlet. |
| Chamber Stand | Made of MS angle, duly painted. Unit is supplied with 3/5 nos. of PVC coated rods and 9/15 nos. stainless steel hooks for hanging |
Size
| 450 x 450 x 450 mm | 450 x 450 x 600 mm |
| 400 x 500 x 750 mm | 450 x 600 x 600 mm. |
| 400 x 500 x 900 mm | 600 x 600 x 600 mm. |
| 450 x 600 x 900 mm | 600 x 600 x 900 mm |
| 600 x 600 x 1000 mm | 900 x 900 x 600 mm. |
| 1000 x 1000 x 1000 mm | Any Other Size as per Customer's Requirement |
