LABORATORY INSTRUMENTS

Gidc, Vapi, Gujarat

"LI" make Laboratory Vaccum Ovens are designed & fabricated to suit various I.S.Standards application in the growing field of Medical, Agricultural, Industrial & Research laboratories. Round inner chamber with toughened glass window. Maximum vacuum up to 760 mm of mercury. Installed with digital temperature controller cum indicator for better accuracy and control of temperature. Temperature range up to 200 C. Input voltage 230 volts AC supply

For conditions as per ICH Guidelines25C 60% RH/40C 75%RH/30C 65%RH / 25C 40% RH / 40C 25% RH / 30C 35% RH. Temperature range: 10.0C to 60.0C. Accuracy / Uniformity: 0.1C/1CHumidity range: 25% to 95% RH. Accuracy / Uniformity 2%RH/3%RHTemperature / Humidity display: Digital LED 3 digitControl: Microprocessor based PID control. With Auto tune CE markedResolution: 0.1C/1%RHTemperature sensor: PT 100RH sensor: Direct capacitance typeHeating: U shaped Nichrome wire heater in SS sheathingCooling: CFC free Kirloskar make compressor utilizing R 134A eco friendly refrigerant, with condenser, motor and relaySteam injection: Boiler with reservoir made of thick stainless steel, with heater, water inlet control, low water level safeguardAir circulation: Flange motor with impeller / blowerConstruction: Double wall, with insulation, outer door key lockable, inner glass viewing doorChamber illumination: Fluorescent light with door switch Safety features: High temperature safety cut off: Low water level boiler cut off: Electrical overload cutoff relay for compressor: Time delay for compressor switch ON: Electrical circuit breaker Feet: Castor wheels. Trays: SS wire mesh heavy dutyElectrical: 230V / 15A / 50 Hz

Specification Temperature range: 5.0C to 60.0C. Accuracy / Uniformity: 0.5C/1C Temperature display: Digital LED 3 digit Control: Microprocessor based PID control. With Auto tune CE marked Resolution: 0.1C Temperature sensor: PT 100 Heating: U shaped Nichrome wire heater in SS sheathing Cooling: CFC free Kirloskar make compressor utilizing R 134A eco friendly refrigerant, with condenser, motor and relay Air circulation: Flange motor with impeller / blower Construction: Double wall, with insulation, outer door key lockable, inner glass viewing door Chamber illumination: Fluorescent light with door switch Safety features: High temperature safety cut off: Electrical overload cut off relay for compressor: Time delay for compressor switch ON: Electrical circuit breaker

"LI" make Autoclaves are designed and fabricated for steam sterilization process to Kill micro-organism through the application of saturated steam under pressure to suit various I.S. standards application in the growing field of Medical, Agricultural Institution, Bio-Chemical Industrial, Research laboratories and Various Industries. Specification Application: For use in Microbiology, QC & Research laboratory - Pharma industry Double wall design has single chamber for steam and water Fully automatic operation; cycle begins by press of the START button Initial air purging cycle; at the start air is automatically removed from the chamber Microprocessor based digital temperature indicator controller controls temperature / pressure precisely at set value Temperature sensor: PT 100 In built digital timer; timer can be adjusted as per sterilization load requirement Automatic steam exhaust at the end of cycle Low water level heater safeguard. Safety high pressure release valve Safety high temperature cut off. Included if ordered separately Working chamber made of stainless steel LM 304 grade of 2mm thickness Outer cover made of stainless steel 1mm thick Lid, flange & bottom sheet also made of stainless steel. All joints argon welded Joint less silicon gasket. Heavy duty industrial flange heater

ECONOMY MODEL : Double wall design inlet port at the bottom allows air entry, air passess through heating elements, is warmed then flows upward through the inner chamber and flows out through a 2" adjustable vent at the top.(include optional motorized air blower for fast drying times).

"LI" make Laboratory Incubators are designed & fabricated to suit various I.S. standards application in the growing field of Medical, Agricultural, Industrial, Research Laboratories & Hospitals.

"LI" make Laminar Flow are designed and fabricated to provide an individual clear air environment for small items no requiring a full-size clean room. In the laboratory, individual laminar flow cabinets are commonly used for specialized work such as tissue culture to eliminate airborne contamination.

Ideal instrument to check blister Packs, Strip for Leak Test. The old method of separate desiccator and huge vacuum pump is replaced with the new Leak Test Apparatus in GMP Stainless Steel Body with phenomenal compactness. The instrument is equipped with Diaphragm type vacuum pump gives higher level of vacuum in shortest possible time. Die pressed polycarbonate vacuum desiccator sustains vacuum for long time. A vacuum gauge is provided to indicate vacuum level which is connected ti isolation valve to disconnect the source. Thus avoiding the need of continues running of vacuum pump. 99 minute Digital timer helps the operator to do other work It's amazing compactness saves lot of valuable place in process laboratories.

"LI" make Rectangular horizontal electric muffle furnace powder coated. Working temperature 1150C, maximum temperature 1200C. Complete with indicator lamps. Installed with digital temperature controller

"LI" make PH meter - ideal instrument for a variety of application including environmental, west water, drinking water, food, beverage, chemical and pharmaceutical industry.

"LI" make This instrument is same as LI 32C. It is equipped with a magnifier to observe the tips of the melting point capillaries holding the samples to be tested. Instead of the conventional glass thermometer, it is fitted with highly sensitive PT-100 sensor and the temp. is indicated on a digital readout. A press button is provided which is to be pressed when the desired change is noticed in the sample under test. The temp. reached at that stage is then held on the readout, till the `CLEAR' button is pressed. The readings obtained are therefore quite accurate, as the operator can concentrate on the visual observation of the sample without looking on to the thermometer.

Specification Temperature range: +2.0C to +8.0C. Accuracy / Uniformity: 5C/1.0C. Temperature display: Digital LED 3 digit Control: Microprocessor based PID control. With Auto tune CE marked Resolution: 0.1C Temperature sensor: PT 100 Heating: U shaped Nichrome wire heater in SS sheathing Cooling: CFC free Kirloskar make compressor utilizing R 134A eco friendlyrefrigerant, with condenser, motor and relay Air circulation: Flange motor with impeller / blower Construction: Double wall, with insulation, outer door key lockable, innerglass viewing door Chamber illumination: Fluorescent light with door switch Safety Features: High temperature safety cut off: Electrical overload cutoff relay for compressor: Time delay for compressor switch ON: Electrical circuit breaker

"LI" make Double walled in construction. Exterior made of mild steel with thick iron angle frame. Interior made of mild steel with provision for forced air circulation using a motorized blower. Provided with control panel for monitoring temperature. Installed with Digital Temperature Controller cum Indictor with superior quality contactor for cutting / restoring power to the heaters. Control Panel with suitable neon lamps for indication of Mains On / Off. Heater On / Off etc.

"LI" make Bath chamber made of Stainless Steel. Lid made of SS exterior of M.S.powder coated to smooth finish. Temperature Control cum Indicator : Digital Accuracy : -+0.1 'c. Resolution :0.1 'c. Immrsion type heater used. Mounted on castor wheels for easy moveability. Installed with pump and Stirrer, external / internal closed loop system.

As per GMP and ICH guidelines Provided with stainless steel racks and perforated trays Provided with standby humidity and refrigerated system Modular type construction and assembled on-site A safety / emergency bell switch provided inside the chamber Internal illumination of chamber. Temperature range: 20.0C To 40.0 C Accuracy: + 0.2 CUniformity: 1C Humidity range: 40% to 98% RH Accuracy: 2%RHUniformity: 3% Temperature / humidity control: Digital display, Microprocessor based Temperature resolution: 0.1 C, Humidity resolution: 1%RH Data logger / Scanner: 8 channel (4 temperature + 4 humidity), Connect to any windows based PC, can print, record, date, time, temperature and humidity at various points in the chamber.

LI make Humidifiers are designed and fabricated for economic way to create Humidity by steam for humidification to suit various I.S. standards application in the field of Medical, Agricultural Institution, Bio-Chemical Industrial, Research laboratories and Various Industries.

Introduction :LI make Orbital Shaker are designed and fabricated to suit various I.S.Standards of orbital shaking motion applicable in growing field of Medical, Agricultural, Industrial Research Laboratories etc. Features :a) Shaking assembly with Eccentric pully mechanismb) PMDC motor & DC Drive .

LI make Dehumidifiers are designed and fabricated for economic way to create Dry Air with positive humidity to suit various I.S. standards application in the growing field of Medical, Packing Room, Processing industries, Printing & Lithography, Photographic industries, Equipment room, Computer and Data storage rooms and various Industries.

Introduction :LI make Reciprocating shaker water bath are designed and fabricated to suit various I.S. standards to reciprocating shaking motion application in the growing field of Medical, Agricultural, Textile, Industrial, Research laboratories and Hospitals. Features :a) Ambient +5 deg c. to 99oC.b) Time proportionate digital Temperature controller with an accuracyof +/- 0.5oC.c) Shaking with the help of AC/DC Gear motor with electronic speed regulator. Application :Reciprocal shaking water bath for vigorous mixing

Thermostatically controlled. Outer and inner body made ofStainless Steel. Temp. range : ambient to 100'c