Our Products

Laboratory Equipments 15 Products available
Freezers 3 Products available
Autoclaves 3 Products available
Clean Room Equipment
2 Products available
- Laminar Air Flow
- Air Shower
Testing Equipments
2 Products available
- Stability Test Chamber
- Salt Spray Chamber
Measuring Instruments & Equipment
2 Products available
- Digital Tds Meter
- Benchtop Type PH Meter
Induction Cooktops, Gas Stoves & Burners
2 Products available
- Hybridization Oven
- Double Walled Hot Air Oven
Anemometer
1 Products available
- Anemometer
Weighing Scales & Measuring Tapes
1 Products available
- Weighing Balance
Lab Stirrer
1 Products available
- Magnetic Stirrer
Others Products 29 Products available

Laboratory Equipments

Leading Manufacturer, Supplier & Retailer of Wrist Action Shaking Machine, Soxhlet Extraction Unit, Incubator, Plant Growth Chamber and Orbital Shaking Incubator.

Wrist Action Shaking Machine

We are offering wrist action shaking machine. Labsol introduced world's best wrist action shaking machine, which is used for general-purpose and its found very useful for mixing or agitation ingredients, solution in flasks, designed to hold flacks from 100 ml to 1000 ml council or round bottom. Variable speed controlled by regulator fitted with fractional hp motor. The power supply is 220 volts ac -50 hz. It has a heavy cast iron base with rugged construction and two side arms for holding flasks. It is fitted with a f.h.p. Heavy duty motor with variable speed. It can hold flasks from 100 to 1000 ml. The capacity is supplied with cord and plug to work on 220230 volts a.c. Supply. it is general purpose machine and found very useful for mixing or agitation ingredients, solution in flasks, bottles, beakers and kahn rocks etc. use:to hold 4 flasks. to hold 4 flasks and top platform to hold 4 flasksto hold 8 flasks. to hold 8 flasks and top platform to hold 4 flasks.

Additional Information:

Delivery Time : 1-2 weeks

View Complete Details

Ask Latest Price & Details

Soxhlet Extraction Unit

We are offering soxhlet extraction unit. applicationssoxhlet extraction unit consists of mild steel sheet housing, two vertical & two horizontal rods with adopters and screws to hold the flasks. institutemedical collegeindustriespharmacy colleges and industrylaboratorieshospitalspharmaceutical industryfeatures: * heating element attached to knitted fabric for flask support* gap between the metal casing and the heater is filled using glass wool* solvent escapes through the draining hole below each element or evaporate in case of spillage* extraction apparatus is fixed on housing having two retort rods and a cross bar* in-built energy regulator for controlling all the heaters* heating elements with separate onoff switches for convenience* pilot lamp for indication of working status

Additional Information:

Delivery Time : 1-2 weeks

View Complete Details

Ask Latest Price & Details

Incubator

We are offering Incubator, Salient Features of IncubatorVersatile usage. Ergonomic DesignEnergy EfficientLong lifeLow Maintenance Construction Details:Incubators are double walled convection heated units. Outer body of our incubators are constructed out of thick PCRC sheet duly powder coated. The inner chamber is made of heavy gauge stainless steel sheet of SS-304 grade. The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our bacteriological incubators. The unit is mounted on a sturdy steel frame. The unit is provided with one to three stainless steel shelves (As per the inner size). Heating:Indirect heating system is provided in our units, comprising of air heaters made of high grade Kanthal A-1 wires of suitable wattage. The warm air is evenly distributed throughout the chamber through efficient motor fans ensuring a very good temperature sensitivity. Temperature Range:Temperature range of our standard incubator models are 5c above ambient temperature to 70 c. However we have the capacity to modify the same to suit the individual specialized requirements of our customers.

Additional Information:

Delivery Time : 1-2 weeks

View Complete Details

Ask Latest Price & Details

Plant Growth Chamber

We are offering plant growth chamber. features:-many area of plant research require the use of a controlled environment. In this way, a plants response to different conditions can be monitored or a particular habitat imitated. Standard propagation techniques can be greatly speeded up using a growth cabinet as well as achieving a higher success rate. Where micro propagation is being used a growth cabinet is essential for rooting the plantlets and adapting them to normal conditions. This plant growth cabinet is ideal for all routine propagation and research applications. oriented design of shelves makes you adjust each space of shelves without difficulty. with a solid see through double walled door and a full view inner plexi-glass door enables inspection and monitoring of inner chamber specimens without disturbing the process temperature. front double walled door is provided with lock and key arrangementcaster wheel mounted for easy portability. excellent quality magnetic gum packing door gasket for external door. door operated illumination lamp is fitted inside the chamber for easy visibility. foamed-in-place puf insulation ensures thermal stability and reduces electrical energy consumption.

Additional Information:

Delivery Time : 1-2 weeks

View Complete Details

Ask Latest Price & Details

Orbital Shaking Incubator

We are offering orbital shaking incubator, construction:our incubator shakers are double walled convection heated and cooled units. Outer body of our incubator shakers are constructed out of thick pcrc sheet duly elegantly powder coated. The inner chamber is made of heavy gauge stainless steel sheet of ss-304 grade. The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our incubator shakers. The unit is provided with two doors, the inner door is made of thick plexi glassfloat glass, to view the specimens without disturbing the temperature of the chamber. This door is provided with magnetic door closer.the outer door is made of mild steel sheet lined with stainless steel from inside. This door is provided with lock and key arrangement. The unit is mounted on a sturdy steel frame and provided with castor wheels for easy movement inside the laboratory. The unit is provided with twothree stainless steel shelves. The triple walled back of our incubator shakers are provided with two air circulation fans for uniform maintenance of the temperature throughout the chamber. Shaking system:the efficient and diligent shaking system of our incubator shaker has a orbital shaking movement which is powered by a reliable heavy duty dc motor. Shaking speed:the variable shaking speed incubator shaker is between 20 rpm to 225 rpm. speed control:the orbital shaking in our orbital shakers is controlled by a dc drive which in turn is controlled through speed controller cum rpm indicator with great accuracy.

Additional Information:

Delivery Time : 1-2 weeks

View Complete Details

Ask Latest Price & Details

Chiller Circulatory Water Bath

We are offering chiller circulatory water bath. applicationslabsol chiller circulator is most ideal for chilling and condensing applications in external systems such as rotary vacuum evaporators, viscometers, electrophoresis systems, chilling of heated water baths and general lab applications of chilling in closed loop systems. Advantages & benefitscompact circulator chiller, can be placed under or over the workbench. hermetically sealed compressor with environment friendly cfc free refrigerants. reduces tap water consumption thus reducing high cost of water and waste water. waste water does not contain hazardous substances thus eliminating danger to personnel and environment caused by solvents. built-in circulator pumps for efficient circulating processes. offers highest level of performance, flexibility and control for most demanding applications. low noise level. wide operating ranges and applications.

Additional Information:

Delivery Time : 1-2 weeks

View Complete Details

Ask Latest Price & Details

Bacteriological Incubator

We are offering bacteriological incubator, salient features of incubator versatile usage. ergonomic designenergy efficientlong lifelow maintenance construction details: bacteriological incubators are double walled convection heated units. Outer body of our incubators are constructed out of thick pcrc sheet duly powder coated. The inner chamber is made of heavy gauge stainless steel sheet of ss-304 grade. The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our bacteriological incubators. The unit is mounted on a sturdy steel frame. The unit is provided with one to three stainless steel shelves (as per the inner size). heating: indirect heating system is provided in our units, comprising of air heaters made of high grade kanthal a-1 wires of suitable wattage. The warm air is evenly distributed throughout the chamber through efficient motor fans ensuring a very good temperature sensitivity. Temperature range: temperature range of our standard bacteriological incubator models are 5c above ambient temperature to 110 c. However we have the capacity to modify the same to suit the individual specialized requirements of our customers. temperature sensitivity: temperature inside our bacteriological incubators are controlled with a sensitivity of + 0.5 c or better. front panel: front panel of our units comprises of onoff switches heating and mains indicator lamps, micro processor based digital cum pid temperature controller. temperature control: the temperature inside our bacteriological incubator is controlled through micro processor based digital cum pid temperature controller.

Additional Information:

Delivery Time : 1-2 weeks

View Complete Details

Ask Latest Price & Details

Fume Hood

We are offering fume hood. Labsol laboratory fume hood is a ventilated enclosure designed to contain and exhaust fumes, vapors, mists and particulate matter generated within the hood interior. Fume hood structures are basically boxlike, with an open side (or sides) for access to the interior of the hood. A transparent, movable panel, called a sash, allows the user to restrict or enlarge the hood opening. The hood is connected, via ductwork, to an exhaust fan, usually located on the roof of the building in which the hood is located. The exhaust fan draws air from the room in which the hood is in through the hood opening and out through the ductwork. The speed of the air moving through the hood opening is known as face velocity. labsol fume hood is fabricated from special grade pre coated mild steel sheet duly powder coated from outside and epoxy painted from inside. The inner walls of the working chamber is covered with epoxy coated asbestos or frp or hdpe lining or as required which duly provides better protection from acid fumes in the lab. labsol fume hoods are aerodynamically designed considering most efficient airflow to the suction. Double wall feature provides easy access to utilities like water, gas, vacuum & electricity. Detachable base storage cabinets are provided with castors for easy maintenance, sigma offers variety of lining & work surfaces like granite, ceramic, s.s., p. P. & frp. Sash is provided with 6 mm toughened glass & counter balance is provided to achieve easy movement. High performance centrifugal blower is provided with different ducting materials like pppvchdpe etc. Baffleremovable plates incorporated into the rear or top of the work chamber to form a plenum between the work chamber and the exhaust duct connection to promote uniform scavenging of fume and the point of discharge. Exhaust systemall exhaust air ductwork, fan and associated equipment installed between the point of connection to the fume hood and the point of discharge.

Additional Information:

Delivery Time : 1-2 weeks

View Complete Details

Ask Latest Price & Details

Bod Incubator

We are offering Bod IncubatormSalient Features of BOD IncubatorVersatile usage. Ergonomic DesignEnergy EfficientCFC free coolingLong lifeLow Maintenance Construction:BOD Incubators are double walled convection heated units. Outer body of our incubators are constructed out of thick PCRC sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated. The inner chamber is made of heavy gauge stainless steel sheet of SS-304 grade. The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our bod incubators. The unit is provided with two doors , the inner door is made of thick flexi glassfloat glass, to view the specimens without disturbing the temperature of the chamber. This door is provided with magnetic door closer. The outer door is made of mild steel sheet lined with stainless steel from inside. This door is provided with lock and key arrangement. The unit is mounted on a sturdy steel frame and provided with cater wheels for easy movement inside the laboratory. The unit is provided with three stainless steel shelves. The triple walled back of our bod incubators are provided with two air circulation fans for uniform maintenance of the temperature throughout the chamber. Heating:Indirect heating system is provided in our units, comprising of air heaters made of high grade Kanthal A-1 wires of suitable wattage. The warm air is evenly distributed throughout the chamber through efficient motor fans ensuring a very good temperature sensitivity. Cooling:An energy efficient cooling unit is installed in our bod incubators to enable bio chemical demand studies at lower room temperatures. We use ISI marked high end CFC free compressors of KirloskarTecumseh make, conforming to latest international standards and guidelines. Temperature Range:Temperature range of our standard BOD incubator models are 5 c to 60 c.

Additional Information:

Delivery Time : 1-2 weeks

View Complete Details

Ask Latest Price & Details

Humidity Chamber

We are offering Humidity Chamber. Salient Features Reliable. Precise Control Of Environmental ParametersMicro-processor based ControllersCorrosion Resistant interior and exteriorsEnergy EfficientCFC free coolingSturdy ConstructionLow MaintenanceLight WeightConstruction Details: Humidity chambers are double walled convection heated and cooled units. Outer body of our environmental chambers are constructed out of thick PCRC sheet duly pre-treated with primers and rust proofing and painted with long lasting stove enamel or elegantly powder coated. The inner chamber is made of heavy gauge stainless steel sheet of SS-304 grade. The gap between the walls is filled high grade mineral glass wool, which ensures maximum thermal efficiency in our walk in incubatorsThe unit is provided with two doors, the inner door is made of thick plexi glassfloat glass, to view the specimensculture mediastocks, without disturbing the temperature of the chamber. This door is provided with magnetic door closer. The outer door is made of mild steel sheet lined with stainless steel from inside. This door is provided with lock and key arrangement. The unit is mounted on a sturdy steel frame. The unit is provided with various customized shelves in various permutations and combinations to suit individual requirements. The triple walled back of our environmental chambers are provided with two air circulation fans for uniform maintenance of the temperature throughout the chamber. Heating:Indirect heating system is provided in our units, comprising of air heaters made of high grade Kanthal A-1 wires of suitable wattage. The warm air is evenly distributed throughout the chamber through efficient motor fans ensuring a very good temperature sensitivity. Cooling:We use ISI marked high end CFC free compressors of KirloskarTecumseh make, conforming to latest international standards and guidelines

Additional Information:

Delivery Time : 1-2 weeks

View Complete Details

Ask Latest Price & Details

Egg Incubator

We are offering egg incubator, the labsol manufacturing brand. Outer wall is made up of m.s. Sheet duly painted and inside of s.s. Or alum. The gap between inner and outer wall is filled with high grade mineral glass wool. Temp. Range from ambient to 70 c is controlled by jumo ego german capillary type thermostat with an accuracy of + 0.5 c. The unit is provided with manual tilting device, so as to tilt the tray holding the eggs. power supply: to work on 220230 volts ac supply range of temp. : room to 70 couter body: m.s sheet and powder coating painted heavy gauge inner body: s.s sheet 304 or aluminum sheet pid controller: temp. Controller by pid controllers best accuracy humidity controller: humidity control by humidity controller 20% to 95%digital timer: tilting control automatically and control by digital timer

Additional Information:

Delivery Time : 1-2 weeks

View Complete Details

Ask Latest Price & Details

Co2 Incubator

We are offering co2 incubator, with the solid double walled door, a full view inner plexi glass door enables inspection of specimens inside the chamber without disturbing the process temperature. good quality of magnetic gum packing for external doors. User friendly design pf shelves makes you adjust each space of shelves without difficulty. with forced air circulation at triple walled back, it maintains optimum uniformity of distribution of temper high grade puf insulation between outer and inner chamber for minimal thermal losscaster wheel mounted exterior cabinet is made of steel sheet duly powder coatedinner chamber and trays are made of stainless steelfront double walled door is provided with lock and key arrangement door operated illumination lamps is fitted inside the chamber for easy visibility fitted with microprocessor based digital temperature indicator - cum-controller to control the temperature from 5c to 60c 0.5c. cfc free eco friendly compressor capacity: 171 liters.

Additional Information:

Delivery Time : 1-2 weeks

View Complete Details

Ask Latest Price & Details

Rectangular Double Walled Water Bath

We are offering rectangular double walled water bath. It is a double walled bath with inner chamber made of stainless steel and outer wall are made of mild steel sheet duly powder coated. The gap between outer and inner walls is filled with special grade glass wool insulation. The concentric rings can be removed to accommodate containers of microprocessor based pid controlled. Temperature range from ambient to 100.c. 1c. Supplied complete with two indicator lamps, concentric rings, onoff switch, cord & plug. Suitable to operate on 220 230 volts single phase, 50 hz. Ac supply.

Additional Information:

Delivery Time : 1-2 weeks

View Complete Details

Ask Latest Price & Details

Dry Bath

We are offering dry bath. features:ideal for enzyme reactions, inactivation of sera, incubation and other laboratory procedures. designed for multi-function dry bath heating. precise temperature control from ambient +5 c to 150 c with 1 c accuracy. fitted with microprocessor based digital temperature indicator cum controller for auto control with respect to time and temperature and is also fitted with in-built buzzer timer for auto time control to indicate cycle end. microprocessor based digital temperature indicator cum controller having individual display for set value and process value. recessed wellcavity accommodates two interchangeable aluminum insert blocksusers self compensation functions for temperature to counter for difference between block temperature and sample temperature. block extraction tool facilitates lifting of hot blocks for easy interchangeabilitysupplied with any one set of heating block of various configurations available. dry heating block incubators are powerful, compact and accurate-everything you need for the precision heating of test tubes, cuvettes, micro centrifuge tubes and other small containers.

Additional Information:

Delivery Time : 1-2 weeks

View Complete Details

Ask Latest Price & Details